When I open up AutoCAD 2013 I get the following msg.
"The Modules Program Directroy does not exist. May need to reinstall"
What is the MPD and how does one reinstall it? My AutoCAD 2013 is part of the Product Design Suite Professional. I did go to the Control Panel and ran the Repair function of Mechanical Desktop, Inventor and a couple of other things but that didn't fix the problem.
When I start up my AutoCad 2013 I get the followiing message -
"Module Program Directory does not exist> May need to reinstall" What is the MPD and how does one reinstall it? The program seems to be running OK but that msg. is a bit distrubing.
The 2013 is part of the Product Design Suite Professional and is running on a Lenovo S-30/Win 7 Pro.
I am currently trying to update OS from XP to 7. In the past (XP) I was able to put my code just about any place in the Program directory. Win 7 on the other hand is giving me all kinds of write errors.
View 6 Replies View RelatedRecently I have purchased the above software to be installed on a 32 bit PC. However, the USB installation that came is 64 bit and the free trial on Autodesk website, although it offers the 32 bit, is also 64 bit.
It seems that the 32 bit version does not exist. Is there a way around this? I was hoping to download the 32 bit trial version and using the serial number and product key of the 64 bit.
my client is having an issues when she opens AutoCAD Arch that the attached image shows up...
I have never seen this before, but then I did not do a lot of customizations
I have profile sheets I set up using our template. If I plot the layouts one at a time. I can see the existing grade line in the plot. If I publish all of the layouts at once. The existing profile doesn't plot.
I've checked the layer freeze setting and made sure there is a defined page setup to use in Publish. It's the same setup they plot individually with. I get the same result if I plot directly to our Toshiba printer or to PDF using the CutePDF driver.
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
I am building a surface and started looking at the triangles and found that some are going to non-existant points. I have unfrozen, checked, etc. all of my points to make sure they are not in the drawing.
View 4 Replies View RelatedI'm getting this msg and I don't know what it means. Never seen it before.....
"the properties of these layers should be evaluated to ensure they display as intended in paper space viewports and in layer states.
view the list of unreconciled new layers in the layer properties manager"
I Created a profile from existing surface and created a layer called "PRO-EXISTING" and set linetype to "HIDDEN". I also set my standard style to display linetype "BYLAYER" but my dashes are not even like polylines when plinegen is "ON"
View 4 Replies View RelatedI have a problem with adding new points to existing opening.
I tried to use the method HoleCenterPoints.Add (??), But despite the lack of generating an error points are not added.
presenting a brief example of this functionality.
In my drawing, I inserted a raster image file. I converted it into a block so I can modify it and I scaled it like this:
img_before.jpg
I saved my drawing and I close AutoCAD, but when I open AutoCAD again the image shown on the drawing file is not the same image that I had inserted previously.
img_after.jpg
The image shown is one that I had inserted before the first one but I had erased it from the file because I had to crop it in photoshop to reinsert it again.
I used the purge command to purge the block, I used the image command and i detached the image.
But the image says "unreferenced" when I do the "image command" even though it has the right location and folder. I don't know what to do anymore.
I have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
When I try to create a new font style using the standard Autodesk Swiss fonts, I get the message "font file doesn't exist". I can see that the fonts are in the AutoCAD fonts folder and that I have a file path set to that folder.
View 3 Replies View RelatedI have a FG assembly that shows errors. The parts referenced no longer exist, but it still tells me there are errors on the sketches. Since the parts no longer exist in the assembly, or anywhere for that matter, how can I get rid of this error? I have tried making parts and naming them the same, which it allows me to do, but no luck in resolving the error. I can include the assembly but it is 63MB compressed and am running 2011.
Inventor 2011
Intel Dual Xeon E31225 @ 3.1 GHz CPU
16 GB RAM
NVIDIA Quadro 600 GPU
Windows 7 - 64 Bit
New install of C3D 2007 with SP2 installed.
just wondering if maybe the install got buggered. Tried a repair but same situation.
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies View RelatedAfter making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedIf I have calculated the superelevations and then edit the alignment (for example,I modify the length of spiral), the superelevations doesn´t recalculate. Why?
The guitar (superelevations) in profile view is old. If I load again the style profile view, the data are the same about superelevations.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have created existing and proposed surfaces in Civil 3D 2008 and I'm trying to create a volume surface to produce a cut & fill map. The problem I'm running into is everything I try to follow mentions choosing Elevation Banding (2D) as the style. The only style I have to choose from is Standard. Does the Elevation Banding (2D) style normally come with the program? Or is this something you have to create?
View 3 Replies View RelatedI am adding on to an existing roadway. I want to match my exist.cross slope of the road way which will vary.
When I select to use the parameter reference LinkoffsetandSlope I get a slope, but it is in the wrong direction.The linkoffsetandslope is getting the grade from the existing CL of roadway and the existing edge of pavement.
I have an assembly model which I have `save copy as` to create a new assembly (80% parts the same). I have opened my new assembly and deleted/replaced parts and assemblies that I do not require.
One (released) assembly I have deleted is still showing listed in the vault browser (not in model browser). It is not in the model, is not revealed by `find in window`, is not listed in the bill of materials. If I close my assembly and reopen it is still listed there.
This has now occured in two assemblies. I have never experienced this before in many years of use. We recently upgraded to Inv 2011 and VM Pro 2011 and I'm wondering if there is a connection.
I need to supply a client with a drawing and exist. surface.But I don't want them to have the survey data or points.What's the best way to handle this?
View 1 Replies View RelatedWhen I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies View RelatedIn the documentation API 2014: for SuperelevationCriticalStationCollection appears the property "Item":
[URL]
but I´m trying to use it and it doesn´t exist.
public static void Breaksegment(Autodesk.AutoCAD.DatabaseServices.ObjectId identificador) { try { Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (DocumentLock docLock = doc.LockDocument()) { using (Transaction trans = db.TransactionManager.StartTransaction()) { Alignment align = trans.GetObject(identificador, OpenMode.ForWrite) as Alignment; SuperelevationCriticalStationCollection criteriaStationColl = align.SuperelevationCriticalStations; criteriaStationColl.Item trans.Commit(); } } } catch (System.Exception ex) { System.Windows.Forms.MessageBox.Show(ex.Message); } }
I have added the Reference:Assembly: AeccDbMgd (in AeccDbMgd.dll) and I ´m using Autodesk.Civil.DatabaseServices
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Does the command still exist to export a drawing to the 3DS file type? I remember doing it in 2007, but do not remember the command and can not find it in the help files.
View 9 Replies View RelatedI believe a dwg I am trying to access is affected by the acad.vlx virus as an alert comes up to check autodesk for solution (ID: TS13717811) however the published solution doesn't seem to work for the latest version of AutoCAD LT 2012 as it asks me to access a file in the support folder which doesn't exist on my system.
View 7 Replies View RelatedI have a previously converted Microstation drawing in Autocad 2011. In the conversion all blocks were given unique names. I would like to edit similar blocks globally. Many of the Microstation blocks look like the standard blocks I use. Does a Lisp routine exist that can select similar Microstation blocks and give them a single name?
View 3 Replies View Relatedi have aprblem with the main icons of the ribbon, i install the program and it works correctly Suddenly the user interface converts to the normal autocad i tried to restore the ACAD.CUIX and doesn't work.
i have Win8, the version i have of the program is 2014 and the problem also happen on autocad architecture.
I have a single lic. copy of AutoCAD 2012 LT on a single PC tied to a network server. Our server crashed and needed to be replaced. When they replaced the server, they gave it a new name so I had to reset all the file paths to the redirected folders for my PC. Now I keep getting an error: cannot create temporary file (then shows the file path to the old server).
I have reset all the file location in the files section of the options box, so I do not understand where AutoCAD is still seeing the old server. Is there somewhere else in the software that I need to change the file paths?