Recently I have purchased the above software to be installed on a 32 bit PC. However, the USB installation that came is 64 bit and the free trial on Autodesk website, although it offers the 32 bit, is also 64 bit.
It seems that the 32 bit version does not exist. Is there a way around this? I was hoping to download the 32 bit trial version and using the serial number and product key of the 64 bit.
In my drawing, I inserted a raster image file. I converted it into a block so I can modify it and I scaled it like this:
img_before.jpg
I saved my drawing and I close AutoCAD, but when I open AutoCAD again the image shown on the drawing file is not the same image that I had inserted previously.
img_after.jpg
The image shown is one that I had inserted before the first one but I had erased it from the file because I had to crop it in photoshop to reinsert it again.
I used the purge command to purge the block, I used the image command and i detached the image.
But the image says "unreferenced" when I do the "image command" even though it has the right location and folder. I don't know what to do anymore.
I have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
When I try to create a new font style using the standard Autodesk Swiss fonts, I get the message "font file doesn't exist". I can see that the fonts are in the AutoCAD fonts folder and that I have a file path set to that folder.
View 3 Replies View RelatedIf I have calculated the superelevations and then edit the alignment (for example,I modify the length of spiral), the superelevations doesn´t recalculate. Why?
The guitar (superelevations) in profile view is old. If I load again the style profile view, the data are the same about superelevations.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have created existing and proposed surfaces in Civil 3D 2008 and I'm trying to create a volume surface to produce a cut & fill map. The problem I'm running into is everything I try to follow mentions choosing Elevation Banding (2D) as the style. The only style I have to choose from is Standard. Does the Elevation Banding (2D) style normally come with the program? Or is this something you have to create?
View 3 Replies View RelatedIn the documentation API 2014: for SuperelevationCriticalStationCollection appears the property "Item":
[URL]
but I´m trying to use it and it doesn´t exist.
public static void Breaksegment(Autodesk.AutoCAD.DatabaseServices.ObjectId identificador) { try { Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (DocumentLock docLock = doc.LockDocument()) { using (Transaction trans = db.TransactionManager.StartTransaction()) { Alignment align = trans.GetObject(identificador, OpenMode.ForWrite) as Alignment; SuperelevationCriticalStationCollection criteriaStationColl = align.SuperelevationCriticalStations; criteriaStationColl.Item trans.Commit(); } } } catch (System.Exception ex) { System.Windows.Forms.MessageBox.Show(ex.Message); } }
I have added the Reference:Assembly: AeccDbMgd (in AeccDbMgd.dll) and I ´m using Autodesk.Civil.DatabaseServices
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I believe a dwg I am trying to access is affected by the acad.vlx virus as an alert comes up to check autodesk for solution (ID: TS13717811) however the published solution doesn't seem to work for the latest version of AutoCAD LT 2012 as it asks me to access a file in the support folder which doesn't exist on my system.
View 7 Replies View Relatedi have aprblem with the main icons of the ribbon, i install the program and it works correctly Suddenly the user interface converts to the normal autocad i tried to restore the ACAD.CUIX and doesn't work.
i have Win8, the version i have of the program is 2014 and the problem also happen on autocad architecture.
I have a problem with my fonts in adobe, because there is 1500++ fonts in my font book that already installed, but ,if i open my photoshop there is just 26 fonts that exist?
View 1 Replies View RelatedI've got a problem with a vertex on my model. When I go into the skin modifier or edit poly, this one vertex doesn't seem to exist. It doesn't show up and I cannot move it, yet in the skin modifier it is being affected by something. How can I get this vertex to reappear without completely borking my model's skinning?
View 1 Replies View RelatedI am using PSE-11. I have been editing many pictures (cropping and enhancing) before I send them for printing. I select 6 or 8 images and send them all to the PSE-11 Editor. When I have done all the editing, I select CLOSE ALL and apply my answers to the first file to all of them. I want them to be in Version sets with the originals, and most of them are correct. However some images are stored, with the words 'edited-1' added, but they are not in Version sets, nor in the catalog. The Organizer tells me that it has found new files. Also, when saving some of the images, PSE-11 freezes and is shown as not responding for several minutes.
Yesterday, the Organizer froze for several minutes soon after I started using it.I am using my desktop PC: HP m9452p with Intel Core-2 Quad Q8200 processor, 8 GB RAM, 750 GB hard disk, and Windows 7 Home Premium 64 bit.
I have over 35000 images in my catalog.
When I modify a photo from the Lightroom filmstrip in Photoshop or NIK filters and save it, the new version doesn't return to the filmstrip unless I close Lightroom and then reopen it.
View 3 Replies View RelatedA .psd file with layers created in a full version of Photoshop CS6 does not show the layers in my CS6 Extended version. I am still using the trial version of Extended pending registration.
View 2 Replies View RelatedWhen I open my illustrator file after working in CC, it won't open. I keep getting an error saying "could not read file because the plug-in could not understand this file."
View 1 Replies View RelatedHaving edited photographs in editor and saving the edited photograph, it says processing but does not save the edited version and i am left with the original.
View 1 Replies View RelatedLR 4.3 currently links to PS CS3 which no longer exists on my computer. I have CS6 installed but LR trys to find CS3. Consequently, it doesn't transfer me to PS. How do I link it?
View 3 Replies View RelatedI am running cs6 on both PC and Mac. On my pc if I save a Photoshop file on it as a save as, it does not open the file immediately. I have to close the original file, find the file then open it. Very time consuming and also confusing if you are working fast. On my Mac if i save a document in Photoshop, doing a save as, it saves the doc, and opens it right there and you just continue to work.
View 7 Replies View RelatedIllustrator CC latest version doesn't work. I can't open my ai files, I can't make new documents.
View 6 Replies View RelatedI have a trial version of Illustrator and am finding that glyphs with no unicode are not accessible. If I double-click on the glyph, I get a blank space or a question mark. Is this a function of the trial version?
View 11 Replies View RelatedThe library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it.
View 1 Replies View Relatedmy client is having an issues when she opens AutoCAD Arch that the attached image shows up...
I have never seen this before, but then I did not do a lot of customizations
I am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies View Relatedhow to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies View RelatedI have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
is there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
View 9 Replies View RelatedI have the 2013 AutoCAD Student Version and I want to transfer my file to the AutoCAD 30-Day Proffessional version, Can I do this by easily Copying and Pasting the drawing from version to version?
View 9 Replies View RelatedI have profile sheets I set up using our template. If I plot the layouts one at a time. I can see the existing grade line in the plot. If I publish all of the layouts at once. The existing profile doesn't plot.
I've checked the layer freeze setting and made sure there is a defined page setup to use in Publish. It's the same setup they plot individually with. I get the same result if I plot directly to our Toshiba printer or to PDF using the CutePDF driver.
When I open up AutoCAD 2013 I get the following msg.
"The Modules Program Directroy does not exist. May need to reinstall"
What is the MPD and how does one reinstall it? My AutoCAD 2013 is part of the Product Design Suite Professional. I did go to the Control Panel and ran the Repair function of Mechanical Desktop, Inventor and a couple of other things but that didn't fix the problem.
I am building a surface and started looking at the triangles and found that some are going to non-existant points. I have unfrozen, checked, etc. all of my points to make sure they are not in the drawing.
View 4 Replies View RelatedI'm getting this msg and I don't know what it means. Never seen it before.....
"the properties of these layers should be evaluated to ensure they display as intended in paper space viewports and in layer states.
view the list of unreconciled new layers in the layer properties manager"