Photoshop Elements :: Doesn't Save Edited Version
Dec 19, 2013Having edited photographs in editor and saving the edited photograph, it says processing but does not save the edited version and i am left with the original.
View 1 RepliesHaving edited photographs in editor and saving the edited photograph, it says processing but does not save the edited version and i am left with the original.
View 1 RepliesI am using PSE-11. I have been editing many pictures (cropping and enhancing) before I send them for printing. I select 6 or 8 images and send them all to the PSE-11 Editor. When I have done all the editing, I select CLOSE ALL and apply my answers to the first file to all of them. I want them to be in Version sets with the originals, and most of them are correct. However some images are stored, with the words 'edited-1' added, but they are not in Version sets, nor in the catalog. The Organizer tells me that it has found new files. Also, when saving some of the images, PSE-11 freezes and is shown as not responding for several minutes.
Yesterday, the Organizer froze for several minutes soon after I started using it.I am using my desktop PC: HP m9452p with Intel Core-2 Quad Q8200 processor, 8 GB RAM, 750 GB hard disk, and Windows 7 Home Premium 64 bit.
I have over 35000 images in my catalog.
I accidentally downloaded photos to PSE 11 and spent hours editing them before I realized I was in PSE 11 instead of PSE 12. I had already converted the PSE 11 catalog to PSE 12. I'm hoping there is a method to move the edited file from PSE 11 to PSE 12. Do I have any hope???
View 4 Replies View RelatedI moved my pictures to a saved folder and after I used Photoshop editor I cannot find where the edited version of a picture is located? Photoshop elements 9 seemed to just put alongside my original. I am using Photoshop elements 12.
View 1 Replies View RelatedI am running cs6 on both PC and Mac. On my pc if I save a Photoshop file on it as a save as, it does not open the file immediately. I have to close the original file, find the file then open it. Very time consuming and also confusing if you are working fast. On my Mac if i save a document in Photoshop, doing a save as, it saves the doc, and opens it right there and you just continue to work.
View 7 Replies View RelatedHow can I save edited photo to shutterfly or computer?
View 1 Replies View RelatedUsing Photoshop Elements 12, the photos I edit using any of the editing layers are not saved. Only the original appears in the organizer even though I have selected "version sets" in the saving process.
View 1 Replies View RelatedHow do I save an edited photo in PSE 12. It keeps saying editing in progress
View 1 Replies View Relatedcan't save an edited raw image as a jpg.
View 1 Replies View RelatedMy elements 11 won't allow me to save any edited images. I reloaded Elements 11 ?
View 1 Replies View RelatedI am unable to save any edited images in the photoshop file format and also unable to save photobook or collage projects in ANY format. I am using Elements 9.0.2 on Mac OS X 10.6.8. Any solutions to these problems? (I have used the Catalog optimize & repair tools with no change).
View 2 Replies View RelatedJust upgraded from PSE 9 to PSE 12. Running Windows 7. After editing pic in Editor, I cannot save it to the Organizer in a version set or any other way. The edited pic does save to the computer folder where the pics are stored. Checked boxes include- Save as to original folder, Include in Element Organizer, Save in version set.
View 6 Replies View RelatedWhen I save a jpg, this stupid programme adds "edited" to the file name. How to get rid of this foolish thing.
View 9 Replies View RelatedHow to save edited image after making changes, I find no commit button?
View 2 Replies View Relatededited photos do not save in stack despite this being set in options.
View 3 Replies View RelatedWhy does my PSE11 make my entire computer freeze when I try to save an image I've jsut edited?
View 2 Replies View RelatedI currently run Windows 7 and have Photoshop Elements 5. When I edit a photo it will not let me save it and comes up with a message "Cannot save due to program error". O have tried restarting the computer, reinstalling PE5, saving in a different location, Save As and NOTHING has worked.
View 5 Replies View RelatedJust upgraded from 9 to 12. When I edit a photo, it will not save into a version set, even to the save to version set box is check. Nor can I find the edited version anywhere.
View 3 Replies View RelatedHow can I default the Save in Version Set check box to unchecked so I do not have to remember to unchecked it when I save. I _never_ want to create a version set.
View 3 Replies View RelatedI'm having trouble with PE 12. It is not saving new versions of files in version sets even though I select the option to do so when I save-as from the editor.
Also, when I create a new file, say a photomerge panorama, it does not include it into elements even though I have selected the option to do so.
This appears to be a bug (or 2).
Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
On a side note:We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
Specifics:
PS CS6 13.0.4 x64
Mac OSX 10.6.8
Canon 5d Mark 3 Raw files
I have edited photos and when I go back to the library the photo is the edited version. Is there a way to keep the original and the edited version?
View 3 Replies View RelatedI have my photos on a separate volume at /Volume/Users/Lightroom Photos/…
Everything works fine except when I choose "Edit in Photoshop CS6", work on the image in Photoshop then save it. It gets saved back to the same folder as the original file, but when I tab back to Lightroom it just shows a square tile with a question mark instead of the new file. Tapping on the exclamation mark reveals that Lightroom thinks the new file is supposed to be in /Users/Lightroom Photos/…
For example the dialog box might say:
“_DSC3047-Edit.tif” could not be used because the original file could not be found. Would you like to locate it?
Previous location: /Users/Lightroom Photos/2012/2012-12-08/_DSC3047-Edit.tif
When in reality the original and the edit are both in /Volumes/Users/Lightroom Photos/2012/2012-12-08/ and there is not, and never was a /Users/Lightroom Photos/…
That is, something about saving back from Photoshop stripped off the "/Volumes/" from the beginning of the path. I can choose Locate and find it right where it should be and it will show up. Once it shows up the image tile shows the image but has an exclamation mark; tapping on that brings up a dialog box that says:
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
This is on a Mac and so /Users does exist but that maps to /Volumes/Macintosh HD/Users. I wonder if either LR or PS is confused by there being a /Users and a /Volumes/Users.
Editing in a Nik Plugin (e.g. Silver Efx) works properly, FWIW.
I am using LR4.2 and PS CS6 13.0.1 on OS X 10.8.2.
How can I install a recent version of Photoshop Elements and keep the albums set up in the older version?
View 1 Replies View Relatedi just downloaded CS6 and after editing every photos, and pressing save as nothing showing up?
View 32 Replies View RelatedI am having difficulty generating files with VS X3. The app works fine opening the source files, editing and preview playback. Preview replay has audio and is very smooth. However, all generated files have no audio. The files I'm working with are recordings using the Hauppauge HD PVR controlled by BeyondTV (V4.9.2). Those fies are MPEG-2 Transport files, having the extension *.tp. VS does not recognize the TP extension - which is very frustrating. When I change the extension to M2T, they import fine.
View 7 Replies View RelatedWhen I edit photographs in CS6 as initiated from LR 4.4 they look unaccountably different from the original CR2 file when imported back to LR.
View 5 Replies View RelatedI have Photoshop CS5 installed on my windows7 system. It was working all fine until last week. From last week, I am unable to save the photos that I edit in photoshop. Its like, I save them, but I do not find them anywhere, not in the folder I saved them nor anywhere else in the computer. I also tried saving the pics as a copy still no luck. This is a work environment.
View 2 Replies View RelatedHow should I save edited photos for clients? Save as or Save for web and other devices? When I "save as" the client can't upload their photos into i Photo. When I "save for web and other devices" my resolution drops from 300 to 72? I am using JPG.
View 5 Replies View RelatedI just don't know how to save a picture I made to my SD card . I have latest version of Photoshop Touch, tablet Samsung Galaxy Tab 2 10.1 Jelly Bean.
View 2 Replies View RelatedAfter the installation of Photoshop Elements 11 and Premiere Elements 11 on my new system, the catalogs of version 10 do not appear for the conversion to version 11; my 2 catalogs are installed on a LACIE-2BIG NAS system.
Elements Organizer 11.0.0.0
Version principale : 11.0 (20120830.r.32025)