Why we need to setup drawing limit in our model space when we can just adjust everything fit in our paper before plotting/printing like zooming on viewport or just use scale in layout? why we need drawing limit?
View 9 RepliesHow to setup the scale of drawing.
Luckily, I found an CAD template that already have scaled text and dimension size setup. now, I have to set different scale in the model space according on which scale i wanna plot on view port.
but for annotative scale, what scale should i use in model space? Overall, I just want all my text to be in same size when print out and in a readable size.
I setup my paper in 22x34 but mostly print out in 11x17 paper for office use.
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies View RelatedI have a 2011 template drawing that I've added all the information to that I know about how to survey in C3D. I've used it for a few years now and it works great for us. We now have to update it for used in 2014. IT has told me that I need to create a new 2014 drawing and bring the 2011 styles, groups, etc. into it that way. I used the management import tool to do this in 2014. Seems like all the styles, etc. came over just fine. Any way to test whether or not the template drawing has any garbage in it, such as purging and auditing, so all the bad stuff is gone? C3D - 2014
View 9 Replies View RelatedI would like to draw from the side, especially circles to extrude. see my pic below. my current view only allows to pull circles up etc. I don't want to rotate all the time.
how to you set this looking angle up?
drawing direction.fw.png
I was presented with a little renovation project and need to setup my own drawing. I've worked on CAD for a number of years while at a structural firm, an engineering firm and took classes in school but one thing I never had to do was setup was my own professional drawing from scratch. I know enough that it's crucial I start off on the foot. The engineering firm I worked at had everything ready so whenever I used CAD it was in an existing drawing or preparing a detail which the drafters imported. When I did some drafting work for an architect, he also had the drawing setup for me.
Since I'm now on my own I need to setup my own template drawing with a title block, layers, etc. Whats the best route for setting up my own sheets?
At my firm we always worked in a 1:1 scale & engineering units but since I'm doing floor plans for renovation work I plan on using the industry standard.
How I set Linetype scale for 3 paper space with different page setup with in single drawing.
Explanation:I have a drawing with XRef attached, I want to make 3 paper space for this drawing with different page setup A0, A1 and A3. I am confused how I set line type scale for each paper space.
I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
I have too many paper sizes in PageSetup. This makes choosing the proper page size too lengthy and time consuming.
I only use two paper sizes namely A4 and A3 so I don't need to have English paper size like 11x14 in, Hagaki, Index Card and 30 other pagesetup.
How can I delete or get rid of unnecessary paper sizes?
I have a drawing and I have a field calling up the path and file name. Is their a way to limit the size of the path displayed? For example, if my drawing is C:users
ame1
ame2
ame3 4
ew5.dwg, is their a way to only show ...
ame3 4
ew5.dwg?
How many raster images can I add to an AutoCAD drawing?
Is there a limit? If so what is this limit and how can I change it?
I am using the COGO Points from Corridor command but would like to limit the freqency of the created points to only every 50 ft (half station) or so. Is there a command I can change to make this happen ??
I've checked the CreatePointsFromCorridor command setting and it doesn't seem to be there...
I have prepared an animation which is 50 seconds long. Now, i just want to render that animation, but i couldn't.
The problem is that if i select "Entire Animation" option for the time range, and click the "Render" button, i obtain just an image rendered (1 frame) and if i try to write the time range manually by selecting the "Specified Time Range" option, i've realized that it is not allowed to specify a value greater than 30 secs. When i write "30.1" for instance, the forecolor of the input box turns red, and a message appears if i click the "Render" button, saying "Invalid Expression!"
"Help" says, "You can adjust any value in the input box.", however.
I've solved the problem by making two seperate animations and merging them by using an other video editing software, but i didn't satisfy the topic. Is there a limitation due to "something" or am i doing something wrong?
I am trying to increase the memory limit to my raster options and it wont let me change the size. I have plenty of available memory(mb) to use, but after i restart civil 3d and go back to the same options menu, its back to what it was..
View 3 Replies View RelatedIs it possible to get a Limit/Fit tolerance included in a Hole Note call out, such as H7 etc?
Currently, when I am dimensioning Counter Bore holes, I have to use a general dimension for CBore dia incuding the Limit/Fit tolerance and manually add the hole dia (or visa versa). This means I have to manually update any changes to hole dia.
I am trying to increase the memory limit to my raster options and it wont let me change the size. I have plenty of available memory(mb) to use, but after i restart civil 3d and go back to the same options menu, its back to what it was...
View 7 Replies View RelatedIs there a way to limit the folder directory to only the last few directories?
Example:
If I have the file here,
C:folder1folder2folder3...folder10file.dwg
And I only need to know this,
folder9folder10file.dwg
Some of my files exist in folder directories that extend off the sheet within the plotstamp printing single line and I would like to shorten them to only show the last few directories as all the ones before are exactly the same. I do not want to change the plotstamp to multiline and I can not move the files to other directories as this is just how our system is set up.
I'd like to limit the stretch feature to 8" increments.
View 2 Replies View RelatedI have an iPart with 10 key columns that I published to the Content Center. During the publishing process I can only select 9 of those key columns and I can't add a 10th. I need to get that 10th one in there. why there is a limit or how to get aroud it?
View 1 Replies View RelatedI've got a large job and Object Isolate has been good for our drawing prodeuction but now we're running into some glitches on a regular basis the last few weeks.
1st Undo is being disabled. Thia really only started since we've begun plotting drawings and Isolating objects.
2nd We can't isolate everything. Is there a limit to the number of objects that can be isolated? or anything that controls that?
I have installed the two service packs hoping to fix this issue. There appears to be a limit to the quantity of items that can be selected if trying to change a property using a pulldown menu. For example, if I select all items in a drawing (say 25,000 items, didn't test the limit), using (CTRL+A) or with mouse, and all items are not the same color, the OBJECT COLOR menu should be blank (have not value) because there is not only one color for the objects. Same would be true of the Layer menu if all objects are not on the same layer. This does not happen, the current Color or Layer are shown in the menu's. WIth the objects selected, changing the color (say from red to green) has no effect. Same is true if trying to assign all selected items to a specific layer. WIth less items selected (didn't test the limit), things work as expected.
I tried to see if the problem was with the menu, so I used the command line commands. Change, Property, Color, with all items selected works fine. Is there a bug with 2011 LT re this? I didn't have this issue using ACAD LT 2008 previously.
Why is it that when you create the first constraint between any two components, the secondary component moves not only to satisfy the constraint, but also in ways that have nothing to do with the constraint. This is not occasional behavior, it happens every time.
I always have to stop and move the secondary component back out of the way to get to the other features I need to reference to continue.
I am having a problem with the memory limit setting. I am setting my memory limit to be 2056 MB, but it will not keep the setting. I can change it and get a message stating that the change will not work until I restart Civil 3D (Map 3D). When I do that, it goes back to a 204 MB limit instead of the 2 GB I want.
How can I get Civil (Map) to remember this setting?
Win7 Pro 64-bit
Civil 3D 2010 SP2
4GB RAM
I'm using inventor 2009.
I haven't been able to find a solution but can't seem to locate in here in discussion groups.
I need to limit motion when one part bumps into another.
ACAD 2010
ACADE 2008
AIS 2009
I would like to find a way to give a maximum and minimum length to a stretch (or move) but without absolute values.
simplified example of my block:
I have 2 squares, of which one big on, and a smaller one within the bigger one. I want to be able to stretch both squared indefinatly (no problem there), but the big square may never become smaller than the small one, and the small one may never become bigger than the big one...
In other words: the inside square should always stay inside the bigger one, no matter the size of the squares.
The problem with this block is that I have a hatch pattern between the squares, and as soon as i stretch the small square outside (or equal) to the big square... the hatch pattern 'crashes'.
I need to determine a limit of rock cut for a land development project. I have created surfaces for my Existing Grade and Top of Rock. Is there any way to determine the limit of rock cut within 25 ft of the existing ground, the volume of rock cut, and show the limit of rock cut on my plan view?
I could drop the Existing Grade elevations by 25 feet, but then how would I create a separate Surface from the intersection of the lowered Existing Grade surface and the Top of Rock Surface?
Do we have a size limit of the models using replace model reference?
Just done a little testing with some iam's
Anything larger that 500 parts and the drawing does nothing, no replace..
Parent assemblies of the one being edited in place report being changed when a constraint limit is enabled. To reproduce, open Assembly3 (attached) and edit Assembly1 as shown.
Run the following code (also attached).
static void Main(){Inventor.Application application = Marshal.GetActiveObject("Inventor.Application") as Inventor.Application;ApplicationEvents events = application.ApplicationEvents;events.OnDocumentChange += OnDocumentChange;AssemblyComponentDefinition assembly = ((AssemblyDocument)application.ActiveEditDocument).ComponentDefinition;ComponentOccurrence component1
[Code] .....
The following is written to the console.
Document changed : kShapeEditCmdType : kBefore : Assembly1.iamDocument changed : kShapeEditCmdType : kAfter : Assembly1.iamBefore enable constraint limitDocument changed : kShapeEditCmdType : kBefore : Assembly1.iamDocument changed :
[Code] ......
I have created an item made up of lines, circles and arcs. One side line distance will control all other sides, circles and arcs. I applied geometric constraints and then Dimensional constraints. D1 is the distance that will control all other objects. I have it working so that when I change D1, the sides adjust accordingly and the arcs and circles keep their geometry.
I was wondering if there is a way to add a range of distances for D1 so that if someone goes below the minimum value, nothing happens and if you go above the maximum value, nothing happens? I know if you make a block, you can make a list of distances for D1 to move. Is there a way to do this in the design drawing? Although, I don't just want a set range, I would like any distance between, say, 8 - 12 inches.
I tried to set some parameters in the Parameters Manager with no luck. Maybe there is an expression to use? Where would you find this expression if there is one?
what the file size limit is for importing point clouds into Inventor? Or is that a how long is a piece of string question that depends on computer ability?
View 2 Replies View Related