I am having a problem with the memory limit setting. I am setting my memory limit to be 2056 MB, but it will not keep the setting. I can change it and get a message stating that the change will not work until I restart Civil 3D (Map 3D). When I do that, it goes back to a 204 MB limit instead of the 2 GB I want.
How can I get Civil (Map) to remember this setting?
Win7 Pro 64-bit
Civil 3D 2010 SP2
4GB RAM
I am trying to increase the memory limit to my raster options and it wont let me change the size. I have plenty of available memory(mb) to use, but after i restart civil 3d and go back to the same options menu, its back to what it was...
View 7 Replies View RelatedI am trying to increase the memory limit to my raster options and it wont let me change the size. I have plenty of available memory(mb) to use, but after i restart civil 3d and go back to the same options menu, its back to what it was..
View 3 Replies View RelatedHow many raster images can I add to an AutoCAD drawing?
Is there a limit? If so what is this limit and how can I change it?
I recently came across a particularly magical piece of software located here for free. It allows 32-bit programs to address more than 2 GB of memory. It may only work for 64-bit systems though, not sure (i.e. those with CPUs that can work on 64-bit OSs).
I mention this because Xara sometimes crashes with out of memory errors, such as when making large panoramas or doing something else that consumes GBs of memory. By using this utility on the Xara exe to allow it to address more memory than normal, the crashes can stop. This also applies to any other memory intensive software that shows similar behaviour, and makes them much more stable.
The instructions for using the utility to modify exes is below:
MAKE SURE YOU DO A BACKUP COPY OF THE xtreme.exe FILE BEFORE CHANGING IT JUST IN CASE YOU GET INTO TROUBLE
open the program
goto file > open
then find the exe file... in this case it would be xtreme.exe in ./program files/xara/...
On the left side you'll see "NT HEADER".... "DOS HEADER"... etc Highlight "FILE HEADER" under "NT HEADER" On the right side you'll see a chart and in the bottom right corner you will see "CLICK HERE" Click on that and a check box menu system will open. Scroll down the menu list until you see "app can handle > than 2gig address space" and check that. Save the file and close.
I have created an item made up of lines, circles and arcs. One side line distance will control all other sides, circles and arcs. I applied geometric constraints and then Dimensional constraints. D1 is the distance that will control all other objects. I have it working so that when I change D1, the sides adjust accordingly and the arcs and circles keep their geometry.
I was wondering if there is a way to add a range of distances for D1 so that if someone goes below the minimum value, nothing happens and if you go above the maximum value, nothing happens? I know if you make a block, you can make a list of distances for D1 to move. Is there a way to do this in the design drawing? Although, I don't just want a set range, I would like any distance between, say, 8 - 12 inches.
I tried to set some parameters in the Parameters Manager with no luck. Maybe there is an expression to use? Where would you find this expression if there is one?
We're about to roll out LT 2012 now the SP1 is out, normally I would run round and change the default options by hand (template locations, support file paths etc..) Is there any way I can do this in a macro, or some other way, which means I don't have to go to 100 PC's?
View 1 Replies View Relatedhow do i adjust the memory setting? xara pro7 keeps saying low memory try closing doc. or adjust memory setting... where is this setting located?
pro7
windows xp
memory 8gb
I'm trying to set up an action to save a batch of files I creating using the variables tool (as detailed in this video: [URL]), I'll go into the Actions window, and record myself saving the current file in .Ai format, and then stop recording. Seems pretty simple, but when I set that action to run a batch on my dataset it saves all the files without an extension. Am I missing another step where I set the file format that the action is supposed to save with? I'm confused. I've tried this using a few different file formats and they all come up the same.
this is what my Output looks like:
and my simple action:
I would like to modify the Quality setting shown in the "Shaded viewport options" section of the plot dialog box (see attachment). The default appears to be Normal, and the options are Draft, Preview, Normal, Presentation, Maximum, and Custom. I want to use Maximum for 11x17 PDF files but I have 1000's. I can't open each file and change the setting, and then Apply to Layout. I'd also like to know what "Custom" means, but I will settle for maximum for now.
Is this option available under PlotSettings somewhere?
I am looking for a way to set a couple options in the Manual Tune window from the Performance Tuning window (3DCONIG Prompt). More specifically I want to be able to:
Check what the setting for Enable hardware acceleration is (so it can be restored back)Set Enable hardware acceleration offReduce the number of tessellations to cacheReduce both the Surfaces, and Curves tessellation How would I do this from command line? My ultimate goal here is to run these commands in .NET.
What to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
I notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
I'm using Draw X6 64 bit. The program seems to get very unstable with large multipage files., especially just after saving. The save icon greys out suggesting a save is completed but it seems the save is still going on in the background. Is there anyway to get the old behaviour back so that the icon only greys out when the document is actually completely saved? It's safer to stop editing the file while it is saving rather than continue working on it, but the icon is giving me misleading feedback..
View 2 Replies View RelatedWorking in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
how to change the default setting under Jpeg options when saving changes, at present its ticked for Qulaity 12 Max but we want it on Quality 8 high and its a real pain having to change this setting every time we edit an image.
View 7 Replies View RelatedI'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View RelatedI am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
Why we need to setup drawing limit in our model space when we can just adjust everything fit in our paper before plotting/printing like zooming on viewport or just use scale in layout? why we need drawing limit?
View 9 Replies View RelatedI have too many paper sizes in PageSetup. This makes choosing the proper page size too lengthy and time consuming.
I only use two paper sizes namely A4 and A3 so I don't need to have English paper size like 11x14 in, Hagaki, Index Card and 30 other pagesetup.
How can I delete or get rid of unnecessary paper sizes?
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedI have a drawing and I have a field calling up the path and file name. Is their a way to limit the size of the path displayed? For example, if my drawing is C:users
ame1
ame2
ame3 4
ew5.dwg, is their a way to only show ...
ame3 4
ew5.dwg?
I am using the COGO Points from Corridor command but would like to limit the freqency of the created points to only every 50 ft (half station) or so. Is there a command I can change to make this happen ??
I've checked the CreatePointsFromCorridor command setting and it doesn't seem to be there...
I have prepared an animation which is 50 seconds long. Now, i just want to render that animation, but i couldn't.
The problem is that if i select "Entire Animation" option for the time range, and click the "Render" button, i obtain just an image rendered (1 frame) and if i try to write the time range manually by selecting the "Specified Time Range" option, i've realized that it is not allowed to specify a value greater than 30 secs. When i write "30.1" for instance, the forecolor of the input box turns red, and a message appears if i click the "Render" button, saying "Invalid Expression!"
"Help" says, "You can adjust any value in the input box.", however.
I've solved the problem by making two seperate animations and merging them by using an other video editing software, but i didn't satisfy the topic. Is there a limitation due to "something" or am i doing something wrong?
Is it possible to get a Limit/Fit tolerance included in a Hole Note call out, such as H7 etc?
Currently, when I am dimensioning Counter Bore holes, I have to use a general dimension for CBore dia incuding the Limit/Fit tolerance and manually add the hole dia (or visa versa). This means I have to manually update any changes to hole dia.
Is there a way to limit the folder directory to only the last few directories?
Example:
If I have the file here,
C:folder1folder2folder3...folder10file.dwg
And I only need to know this,
folder9folder10file.dwg
Some of my files exist in folder directories that extend off the sheet within the plotstamp printing single line and I would like to shorten them to only show the last few directories as all the ones before are exactly the same. I do not want to change the plotstamp to multiline and I can not move the files to other directories as this is just how our system is set up.
I'd like to limit the stretch feature to 8" increments.
View 2 Replies View RelatedI have an iPart with 10 key columns that I published to the Content Center. During the publishing process I can only select 9 of those key columns and I can't add a 10th. I need to get that 10th one in there. why there is a limit or how to get aroud it?
View 1 Replies View Related