AutoCAD Civil 3D :: 2014 Template Drawing Setup?
Oct 17, 2013
I have a 2011 template drawing that I've added all the information to that I know about how to survey in C3D. I've used it for a few years now and it works great for us. We now have to update it for used in 2014. IT has told me that I need to create a new 2014 drawing and bring the 2011 styles, groups, etc. into it that way. I used the management import tool to do this in 2014. Seems like all the styles, etc. came over just fine. Any way to test whether or not the template drawing has any garbage in it, such as purging and auditing, so all the bad stuff is gone? C3D - 2014
View 9 Replies
ADVERTISEMENT
Apr 2, 2012
I was presented with a little renovation project and need to setup my own drawing. I've worked on CAD for a number of years while at a structural firm, an engineering firm and took classes in school but one thing I never had to do was setup was my own professional drawing from scratch. I know enough that it's crucial I start off on the foot. The engineering firm I worked at had everything ready so whenever I used CAD it was in an existing drawing or preparing a detail which the drafters imported. When I did some drafting work for an architect, he also had the drawing setup for me.
Since I'm now on my own I need to setup my own template drawing with a title block, layers, etc. Whats the best route for setting up my own sheets?
At my firm we always worked in a 1:1 scale & engineering units but since I'm doing floor plans for renovation work I plan on using the industry standard.
View 3 Replies
View Related
Nov 3, 2013
how the scales and printing works.
first i am working in meters .meters is choosen under the drawing settings tab .i am trying to test print at 1:1 a rectangle with 0.2 meters side that normaly will fit in a A4 sheet since the A4 is 0.21x0.297 METERS .
in the print dialogue i set the 1"mm" = 0.001 "units". the result is an image multiplied by 1000...arent the " units " METERS? METERS is what i use in the drawing so why i get a biger image?
if i set 1"mm"= 1 "unit" and NOT 0.001 i get correct 1:1 print .
what i am missing? c3d wants me to give 1mm=1meter?
View 2 Replies
View Related
Aug 1, 2013
One of our Dell workstations has recently decided it will no longer save our CAD drawings to the network. Never had this issue before this week, haven't changed anything that we are aware of. No one else is having network issues. We have connected the computer to a different network outlet at another station, that has no effect on the problem.
When you attempt to save, if you watch the command line it will tell you "Cannot save drawing to K/Work Order/Project/drawing name.dwg, saved copy to K/Work Order//Project/(misc letters and numbers).tmp"
It then deletes the original drawing from its location and saves this temp file.
View 7 Replies
View Related
Jul 30, 2012
I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies
View Related
Feb 14, 2012
I have a drawing what have a template by defect, and i would change the original template by another in the same drawing.
View 9 Replies
View Related
Dec 9, 2013
I recently created a grading file in autocad civil 3d 2014 that contains grading objects. When I try to open the file on another computer that is using autocad civil 3d 2013, the file will not open and I get a fatal error. I audited, purged, recovered and tried about everything.
View 3 Replies
View Related
May 16, 2011
Is there a way to import a template into an existing drawing?
I created a template, AFTER the drawing was created, and would like the drawing to HAVE that template.
View 9 Replies
View Related
Feb 22, 2013
I created a drawing where I created a grading object (pad) under a site, a couple of alignements, etc.
After deleting everything to maintain layer states and settings, I saved the drawing as a starting template for day to day drawing (left it as a dwg, not dwt)
When I start a new drawing from a saveas of the template, it says that there is already a grading group named 'pad' but there isn't anything shown in the prospector. Purge hasn't worked. Any ghost entities left in a drawing.
I've also noticed that if you screw up a grading and try to delete the entire site and start over...you get weird results too. It's like it remembers old stuff you did (ghost entities) and won't let you start with a clean slate.?
Infrastructure Design Suite 2013
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
View 7 Replies
View Related
Jul 16, 2013
We have a raster drawing that we're trying to vectorize using Raster Tools within Autodesk Infrastructure Design Suite (Civil 3d) 2014. However the process is slow going having to convert each line within the raster drawing manually. Is there a way that Raster Tools can automatically vectorize all lines within the drawing instead of picking each and every line?
View 4 Replies
View Related
Jul 27, 2012
I know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
View 9 Replies
View Related
Feb 21, 2012
How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
View 2 Replies
View Related
Feb 11, 2013
I'm trying to setup a table as a template (just in model space) that can be copied and reused several times. I've formatted it how I want it to look and would like to try and copy cells from an excel sheet, keeping the format of the Autocad table. But every time I do it resets the format, font and color. Even when I select the cell and change the color of text in the properties palette, it doesn't change back again? Only when I highlight the actual text and change it in the text editor does it change color. I've even tried locking the format before pasting the excel data. (paste special - autocad entities)
I dont want to change the format in excel as it is auto generated as plain text.
View 5 Replies
View Related
May 23, 2013
We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 5 Replies
View Related
Feb 29, 2012
Is it possible to insert a "field" instruction in the drawing template to get automatically the stations (beginning and end) of the long profile for the sheet considered ?
Example 0+700 - 1+400
View 6 Replies
View Related
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
Apr 4, 2012
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
Jun 21, 2013
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies
View Related
Sep 20, 2013
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
View 6 Replies
View Related
May 10, 2012
Why we need to setup drawing limit in our model space when we can just adjust everything fit in our paper before plotting/printing like zooming on viewport or just use scale in layout? why we need drawing limit?
View 9 Replies
View Related
May 3, 2013
How to setup the scale of drawing.
Luckily, I found an CAD template that already have scaled text and dimension size setup. now, I have to set different scale in the model space according on which scale i wanna plot on view port.
but for annotative scale, what scale should i use in model space? Overall, I just want all my text to be in same size when print out and in a readable size.
I setup my paper in 22x34 but mostly print out in 11x17 paper for office use.
View 1 Replies
View Related
Nov 9, 2012
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies
View Related
Oct 6, 2012
I would like to draw from the side, especially circles to extrude. see my pic below. my current view only allows to pull circles up etc. I don't want to rotate all the time.
how to you set this looking angle up?
drawing direction.fw.png
View 6 Replies
View Related
Jan 25, 2012
How I set Linetype scale for 3 paper space with different page setup with in single drawing.
Explanation:I have a drawing with XRef attached, I want to make 3 paper space for this drawing with different page setup A0, A1 and A3. I am confused how I set line type scale for each paper space.
View 1 Replies
View Related
Jun 13, 2013
I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
View 3 Replies
View Related
Nov 13, 2012
I want to open dwg from template:
DocumentCollection acDocMgr = Application.DocumentManager;
Document acDoc;
try {
[Code]....
But on the line "acDocMgr.MdiActiveDocument = acDoc" AutoCAD is hanging and in around 10 sec AutoCAD closes.
How does the new document from template set active (do current)?
View 5 Replies
View Related
Jul 19, 2012
need to know how to set up a drawing template
View 2 Replies
View Related
Feb 25, 2013
I seem to recall there is a method of substituting old drawing templates with the latest version on open drawings, but for the life of me can neither remember what the command is or enter anything into the ACAD Help search that results in anything remotely useful .
View 9 Replies
View Related
Dec 4, 2012
I drew in the wrong template and now i cant change it.
View 9 Replies
View Related
Mar 31, 2011
I think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies
View Related
