I am aiming to plot and print a 3d model when it has been rendered.
I am able to save the rendered image when it is produced in its pop up box, but then when I try to import the image so that it can be plotted and printed it says that autocad doesn't support the file.
I was rendering my revit drawing using 2 pcs and know i am wondering how i would import these rendered images into the 1 drawing?
View 4 Replies View RelatedI have somehow managed to save a rendered project in another projects library.In the share tab I cant find a way of browsing to this rendered (vsp.mpg) file in order to open it and continue in the create disc process.
View 5 Replies View RelatedI rendered an animation and saved it as .avi file. But the file size limit to 0.99 GB so only first few seconds of the animation was saved.
what I can do to increase the file size limit so the animation can be fully rendered and saved?
I'm new to AECS6 and wanted to embed a video into a video. I rendered an AVI(MPEG4) in Key-shot 4 that is only 6 seconds long.When I import (or drag and drop) that file into AE it freezes and then crashes. I am not sure what's going on. I tried importing other AVIs, and they seem to be working just fine!..
Then i tried importing the FLV of the same AVI video I rendered with keyshot, it says my file is damaged or corrupted. but i can playback the FLV file no problem.I am on windows 7 64bit right now, 8GB of ram, Intel i7 at 3.4GHz, NVDIA GeForace GT 640.
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
Using Inventor 2014 for some very simple (just a few component) models. When I use Studio to render an image, two objects are shown with a "cross" on them. The parts are nothing but extruded circles--nothing to them, so it's not clear to me why there are lines on their surface.
View 5 Replies View RelatedI've been having shadows of a huge grid projected on the surface of my project. Apparently, they come from the sky of my drawing (and I didn't draw anything like that). A few hours ago, I was playing with some sun and lightning settings (I think), and those shadows stopped appearing.
View 4 Replies View Relatedhow to place a rendered image into an Inventor 2011 Drawing?
View 1 Replies View RelatedI'm trying to import a ploting style from one of the drawing to another from my AutoCAD LT 2012.
View 3 Replies View RelatedMy photoshop skills aren't bad however my rendering is hopeless. I wanted to get this printed on a tank top.
View 8 Replies View RelatedIs it possible to import cameras (or saved views) from one AutoCAD file to another?
View 0 Replies View RelatedI made this image a while ago and I can't remember quite how I did it. What I can remember is that I used rendering clouds and adding noise, channels, and changing the color at some point. I did most of it from this video: [URL]....
But I didn't do everything from it, I tweaked something, it may have been the lighting rendering.
The reason I want to recreate this is because I need a version of it in higher quality. It's supposed to have a rock texture look to it, and I made it look golden.
how to replicate this.
After I have created the whole 3D image using autodesk 3ds max, there is an option to view it at any angle like front,left,right etc. or I can view at any random angle by using the mouse. But how do I view the rendering at a particular angle like 15degree or any angle specified by me. I am an amateur in using autodesk.
View 4 Replies View RelatedI am having a problem with camera mapping...I get everything setup and looking good, but when I render it, the image looks really washed out. This happens with both scanline and mental ray rendering. I have done this in the past using max 2009 without any issues.
View 3 Replies View RelatedThe extruded face with System Copy on it has gone really nasty. It looked great before I rendered it! which I daren't render.
View 3 Replies View RelatedUsing X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
I have attached a FDO image and created two different views in paperspace. One at 1:7500 and the other one at 1:2500. All is good until i want to plot the drawing. The native dwg objects are plotted right but the FDO image is plotted at the same scale in both mviews ?
View 6 Replies View RelatedI created a book in the lightroom 4 book module using a photo catalogue. This photo catalogue is updated with new photo every week in the library module, and I would like to be able to use these new photos in the book module. Is there a way to sync the library and book module so when I add some picture in my catalogue in the library module the new photos will appear in the book module?
View 8 Replies View RelatedI think I chose the wrong option when I saved a book, I clicked on save only used photos, I now cant add more photos. I think I should have saved a virtual copy. Do I have to start again?
View 5 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI have a strange thing going on where image frames show up when I plot to PDF. I have set the image frame variable to 2. There is no issue when using a local printer or using print preview for said printer. When plotting or previewing using any of the PDF drivers image frames appear around my title block logos.
View 1 Replies View RelatedWhen I insert aerial photos into Autocadd 2002 or civil 3d 2011 i cannot get the border to disappear. I want them to plot seamlessly without a border or white line between the photos.
View 3 Replies View Relatedwe were working on some planning stuff, altogether more than 100ha in area. in Cad2006, I assembled 6 pieces of colored plans (jpg), each above 10 MB. I did this because scaling and aligning files this size in Photoshop is a real pain and inaccurate.. anyway, when I printed them to pdf (I did select for maximum quality in printing dialog), the lines in the image was a bit fuzzy when viewed for original size. the original ones are sharp as hell on the same scale. and I made sure I DID NOT print larger than the original. luckily the quality loss was not obvious for final use on the A1 poster. still, I wonder if anything can be done to output losslessly.
in CAD;
QQ截图20140113100558.jpg
plotting;
QQ截图20140113101128.jpg
plotted and viewed 100%;
QQ截图20140113101212.jpg
source image at appr. same scale
QQ截图20140113101313.jpg
source image viewed 100%;
QQ截图20140113101247.jpg
I am having troubles plotting out of paper space. In my drawing i have an aerial photograph (inserted as a raster image) that has been scaled, rotated and shifted onto the relevant co-ordinate system. I have a locked viewport and when i zoom in or out the photo 'jumps' around in a random fashion, same when i hit plot preview it appears out of place. I was wondering what could be causing this because i thought that paper space was simply 'viewing' whatever was in model space not being physically able to shift objects.
View 4 Replies View RelatedI am working on the following image but the image that I'm working with on the screen is not the same as the output after I save it. What is happening and how can I fix this?
(the images have been reduced in size and quality so this is for illustration only)
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
I'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
I was trying to create a low-res version of an image, and saved over it by accident (didn't realize I was in the same directory).
I closed it of course, so I can't retrieve it that way. Is there anyway to dig it out of the photoshop cache?
When I try to save my project as a jpeg or other, it always results in a different sized image from my project (e.g. an oval shape looks circular when saved). Could my image and canvas settings be bad (canvas size is 2880x1800)? How can I resolve this? I'm using CS4 on OSX10.5.8.
View 4 Replies View Related