AutoCAD Inventor :: Odd Features In Rendered Image

Sep 30, 2013

Using Inventor 2014 for some very simple (just a few component) models.  When I use Studio to render an image, two objects are shown with a "cross" on them. The parts are nothing but extruded circles--nothing to them, so it's not clear to me why there are lines on their surface. 

View 5 Replies


ADVERTISEMENT

AutoCAD Inventor :: Place Rendered Image Into 2011 Drawing?

Nov 11, 2011

how to place a rendered image into an Inventor 2011 Drawing?

View 1 Replies View Related

AutoCAD Inventor :: Set Features To Be Invisible When Create Sketch After Those 3D Features

Sep 3, 2012

Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?

View 3 Replies View Related

AutoCad 3D :: How To Import Saved Rendered Image For Plotting

Jan 13, 2012

I am aiming to plot and print a 3d model when it has been rendered.

I am able to save the rendered image when it is produced in its pop up box, but then when I try to import the image so that it can be plotted and printed it says that autocad doesn't support the file.

View 6 Replies View Related

AutoCad 3D :: Unwanted Grid Shadow Coming From Sky In Rendered Image

Apr 15, 2012

I've been having shadows of a huge grid projected on the surface of my project. Apparently, they come from the sky of my drawing (and I didn't draw anything like that). A few hours ago, I was playing with some sun and lightning settings (I think), and those shadows stopped appearing.

View 4 Replies View Related

Photoshop :: How To Get Image Rendered

Nov 15, 2012

My photoshop skills aren't bad however my rendering is hopeless. I wanted to get this printed on a tank top.

View 8 Replies View Related

AutoCAD Inventor :: Cable Harness Rendered View

Nov 5, 2013

I have a bit of problem that've been cracking my head. I create a wires, segments using cable harness environments in Inventor. After I created those, I want to see rendered image, but only centerlines appears. I have already change the harness settings into real image(rendered) but still centerlines appears. 

Weird thing is that I create other assembly, it all works perfectly. But I cannot recreate my design, it is already so much work.

View 8 Replies View Related

Photoshop :: Replicate Cloud Rendered Image

Jan 25, 2013

I made this image a while ago and I can't remember quite how I did it. What I can remember is that I used rendering clouds and adding noise, channels, and changing the color at some point. I did most of it from this video: [URL]....
 
But I didn't do everything from it, I tweaked something, it may have been the lighting rendering.
 
The reason I want to recreate this is because I need a version of it in higher quality. It's supposed to have a rock texture look to it, and I made it look golden.
 
how to replicate this.

View 4 Replies View Related

3ds Max :: How To View Rendered Image At Specific Angle

Sep 5, 2011

After I have created the whole 3D image using autodesk 3ds max, there is an option to view it at any angle like front,left,right etc. or I can view at any random angle by using the mouse. But how do I view the rendering at a particular angle like 15degree or any angle specified by me. I am an amateur in using autodesk.

View 4 Replies View Related

Revit :: Import Rendered Image Into A Drawing

Apr 26, 2012

I was rendering my revit drawing using 2 pcs and know i am wondering how i would import these rendered images into the 1 drawing?

View 4 Replies View Related

3ds Max :: Camera Mapping - Image Looks Washes Out When Rendered

Dec 13, 2011

I am having a problem with camera mapping...I get everything setup and looking good, but when I render it, the image looks really washed out. This happens with both scanline and mental ray rendering. I have done this in the past using max 2009 without any issues.

View 3 Replies View Related

AutoCAD Inventor :: Wires Are Not Displayed As Rendered After Created With Harness And Wire

Nov 13, 2013

After I create a wire it will not be displayed as a rendered wire. There is no indication of error in the wire (to sharp angle) and this is also happens for a straight wires with no turns.

I have made multiple revisions of an assembly and in older reviosions I can make the wires and they are shown as rendered. But in the latest revision it is not possible. In a older revision I had a harness assembly than deleted it could this have any affect?

Also is there any setting that hides rendered wires that I might have turned on accidently?I have a student licence and the assembly has about 700 parts if that makes any difference.

View 4 Replies View Related

Photoshop :: CC 3D - Placed Bitmap Image On Extruded Surface Goes Nasty When Rendered

Jul 19, 2013

The extruded face with System Copy on it has gone really nasty. It looked great before I rendered it! which I daren't render.

View 3 Replies View Related

VideoStudio :: No Sound On Clip In Rendered Project Via Create Disk Image?

Aug 29, 2012

Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.

But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.

View 14 Replies View Related

AutoCAD Inventor :: Features On And Off With ILogic?

Oct 19, 2012

I want different features on and off with iLogic.

I have a text parameter with a choice menu of 1,2, and 3

This I want some features  on and off.

If I pass the parameter I get a message: No feature found with the name. Mvg Jos

Your drawings are only as good as the symbols that complete them...

View 9 Replies View Related

AutoCAD Inventor :: Flat Pattern With Rib Features?

Dec 14, 2012

My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.

I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?

Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.

I know I can use derived part to do it but that adds complications.

IV 2012 SP2
Inventor Suite 2013 Ultimate

View 3 Replies View Related

AutoCAD Inventor :: Suppressing Features In Simulation

Sep 29, 2011

when in simulation, if you suppress a feature is it totally taken out of the simulations workings?

I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?

View 5 Replies View Related

AutoCAD Inventor :: Deleting Features Using ILogic

Aug 2, 2012

I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.

The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.

View 7 Replies View Related

AutoCAD Inventor :: Hiding Features In One View

Nov 29, 2012

I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.

View 2 Replies View Related

AutoCAD Inventor :: Hiding Features In One View Of IDW

Jul 17, 2013

I am trying to hide an extruded cut in one view of my .idw.  I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model.  I can not make two models because this is a controlled document.

View 5 Replies View Related

AutoCAD Inventor :: Grouping Features In Browser Bar?

Jan 27, 2010

Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.

View 9 Replies View Related

AutoCAD Inventor :: Suppress Flange Features

Nov 15, 2012

I am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.

I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.

When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.

View 1 Replies View Related

AutoCAD Inventor :: Copy Features Between Parts

Mar 22, 2013

I am trying to create an assembly. I want to copy the small threaded holes and position of the holes from the face of the large part and copy them to the circular part.

I want to establish a relationship so if the hole positions change on the larger part they will also change on the attached circular part.

View 9 Replies View Related

AutoCAD Inventor :: Import IGS And Edit Features?

Nov 22, 2013

I have been given the task of importing and editing an IGS sheet metal part. cannot get a feature tree.

Its a pretty basic sheet metal part just need to add few flanges, change hole/slot size. Its for a college project so I have to do it rather than just redraw the thing. I would also prefer to use inventor than solidworks (if I still have it on my laptop...).

[URL]

View 6 Replies View Related

AutoCAD Inventor :: Skipping Features In A Pattern

Nov 7, 2011

Is there a way to "skip" features i'm creating a pattern by?Meaning, similar to this option in Proe and Solidworks, is it possible to choose some of the holes i'm copying, so they won't be created?

View 1 Replies View Related

AutoCAD Inventor :: How To Hide Features In A Drawing

Sep 20, 2012

I have a panel with holes,cutouts and silkscreen

In the drawing the panel is detailed to show hole locations and sizes on one sheet and in another view @ 1:1 the silkscreen is shown.

The silkscreen is a feature on the panel, text either embossed  or extruded .005" outward. The feature is colored (filled).

On my drawing all the silk screens show up like un-filled fonts. This really bothers some people and my task is to fill the fonts.

Also i need to get the silkscreen by itself and (suppress/invisible) remove the other features from the view.

Suppress will not work as the feature i am trying to show will also be suppressed. Visibility of features is not an option.

Q. HOW CAN I GET THE FEATURE SEGREGATED AND SOLID IN MY DRAWING? but still a feature of the part. i.e. i don't want to create an assembly with a panel and a silkscreen.

How do i suppress features in a view on the drawing?

View 5 Replies View Related

AutoCAD Inventor :: Environment Features Not Working?

Feb 10, 2013

I am using the Student version of Autodesk inventor 2013.I was able to use the simulation, stress analysis features for a period of 10 days from the day of installation but its not working now.I have tried reinstallation also. I am using a registered version only.

View 2 Replies View Related

AutoCAD Inventor :: Create Location Box And Add More Features

Feb 10, 2013

how to create location box in autocad electrical using vb.net?

Bacause i want to add more features to that location box.

how to create location box using vb.net.

View 1 Replies View Related

AutoCAD Inventor :: Linked Features / Can't Suppress One Alone

Sep 9, 2013

The small cylinder was made first, then projected it to a sketch, made offset, and made the big cylinder, but i want to leave only the big cylinder alone. i want to suppress the small cylinder, but when i suppress the samll one both get suppressed.

How can i break this link, which was made by the projected geometry?

Even when i select the projected circle, right click and select Break Link, they still behave the same.

View 1 Replies View Related

AutoCAD Inventor :: How To Delete Holes But To Keep Other Features

May 22, 2013

want to delete holes (see picture), but also to keep other features below hole.

View 3 Replies View Related

AutoCAD Inventor :: Search For Features By Name From Browser?

Nov 2, 2011

Search for features by name from browser. I have seen a pair of binoculars on the top of the feature tree, can't figure out a easy use of it.

C1
Inventor Professional 2013
Vault Collaboration 2013

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved