I am trying to create an assembly. I want to copy the small threaded holes and position of the holes from the face of the large part and copy them to the circular part.
I want to establish a relationship so if the hole positions change on the larger part they will also change on the attached circular part.
I have a large assembly that I have been working with for about a month . I recently went in and changed some information and it seems that my work plane is way out of whack! How to get it back down to size. this makes it real difficult to use my space navigator because the center of gravity is off bigtime too. I also would like to know how to make all parts and features visible, is there a button somewhere?
View 4 Replies View RelatedLooks that in Inventor 2012 apperead few errors with coloring when we apply any feature on derived part. Situation:
1. Design Multi body Part with few bodies
2. Make components from it
3. Open derived component
4. Apply new material for this part (for example Copper)
5. Make Hole on any component surface
6. You will get Default color of Hole surface and surface which contact with Hole Color
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
I made an Part with iLogic rules, let's call it "iLogicPart". The rules inside could create lot of different part by my input.
I want save the different parts to different name as "Part 1", "Part 2", etc. I used SaveAs to get them.
My question is: I want to delete all rules and parameters in the saved parts as "Part 1", "Part 2". And I have lot of features (the name is hard to track) which are inactive, I want to delete them at same time too.
I could manually do so, but I want to use rule to do so automatically.
I recently started working with Inventor (Solidworks user for 15 years). When designing new parts in an assembly in Solidworks, there was always an auto snap feature to align parts (centerline, midpoint, etc). I cant seem to find this option in Inventor 2013. Im trying to design new parts in an assembly but cant seem to snap to any other existing parts features or centerlines. Is there a quick way to activate this option? Is it even available in Inventor?
View 2 Replies View RelatedI like to copy an assembly and save it under different number or name but the assembly made of huge number of parts. In order to re-name the assembly I have to go through each part and re-name them first.
Is there a way to re-name the assembly and parts all at once. I know there is a way with "pack and go" but i don't know how does it works?
How to copy an IAM & several parts to another folder (I created a new project folder for them) using DA without messing up the original file structure. I'd like to change the new IAM file name & only several of the parts that are not common to the original (Stand alone environment, no network).
View 5 Replies View RelatedI often want to copy a design (assembly plus used parts) to some other folder as a quick start for some derived work. I want to be able to work on this copy without influencing the original and visa versa.
The problem is when copying with the windows copy command, the references to the parts point to the original folder. I read that you can use the Copy feature of the Vault for this. But I'm not using the Vault and don't want to.
Pack and Go is also not a good solution because it copies a lot of other stuff and makes a new project file. How can I do this. It seems so a simple operation. But I can not figure out how to do that!
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedLooking for views on what the best method is to copy a selection of parts in IV 2013 which will result in the copied selection to retain it's constraints ? I have an assembly which I have used the mirror method on a batch of parts, also used the standard copy method and pattern components.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have a iLogic assembly with some parts and sub assembly. I need to do a copy of this " Generator " to apply the result later in other assemblies. (something like a member of a ipart or i assembly).
Is there any way to do the copy the assembly to a new folder without the suppressed parts and subassemblies (wich are suppressed in the initial main assembly by iLogic rules)?
I tried to use "Pack and go" and "iLogic design copy", but they always bring the suppressed parts and assembly's, to the new folder and which i don't need to apply in the other assemblies.
How do you copy content center referanced parts to the model? I would like to render my model in Showcase but the nuts and bolts are missing because they are referenced parts.
View 9 Replies View RelatedIs there a way in Inventor 2011 to automatically copy a parts list from an assembly on sheet 1 to the other sheets in a drawing? We generally have large assembly drawings with the same assembly spread out over several sheets and have to create a new parts list and update it separatly on each sheet. We also have this issue with revision information which we store in a symbol but parts lists are more prevelent of an issue.
View 1 Replies View Relatedhere's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedI want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.
The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.
I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedI am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View Related