Is there a way to "skip" features i'm creating a pattern by?Meaning, similar to this option in Proe and Solidworks, is it possible to choose some of the holes i'm copying, so they won't be created?
View 1 RepliesAs you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
I have entered in all the available sizes and have the outer frame of the louver adjusting nicely.Now where I am running into trouble is setting up the louvers and the louver spacing. I have been playing around with the parameters for awhile now and I just can't wrap my head around some things.
Example one:
in the picture below,
HEIGHT is selected on 18 in
I have created an user parameter called LOUVER_QTY which is set to subtract 1.6 in off HEIGHT = 16.4, then I divide that by 2.05 and the result is supposed to equal 8 but it is showing 3.149606. But when I assign LOUVER = LOUVER_QTY it is showing 8
For the most part this file works fine, but when the Height is changed to 56 in, the last bottom louver runs through the bottom of the frame.
I know that I have to change the spacing from a direct input (2.05) to a equation based on height to fix the spacing, but I can't grasp how these parameters are working, why are they red(errors)
Also I don't know how to set up the parameters to set the correct number of occurrences in the rectangular pattern to control the amount of louvers. Something related to to the spacing of the pattern and the selected height.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I would like to generate a rectangular pattern of extruded tubes which have an internal radius that is proportional to the distance to the centre point of the pattern. Or in other words tubes which are narrower in the centre, and wider at the exterior. Is there a way to do this without resorting to creating each tube individually?
More generally, is there a way to parameterise a feature dimension/parameter so that it is a function of spatial position?
How to predict possible interference by planning a piece modeled in sheet metal. eliminate these interferences future?
View 4 Replies View RelatedLet's say that I'm making a simple L bracket. I'm going to form it, and machine the holes in both ends *after* forming. So I don't want the holes to show in my flat pattern.
On the few threads I found, the consensus seemed to be that you may have to have the part file contain no holes and put them in as assembly. So I just accepted this that it must not be able to be done.
Then I ran across a piece of promo literature online from AutoDesk that made mention of the ability to create "postform" features that obviously are created after the forming process.
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View Relatedwhere could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedI want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.
The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.
I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedI am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View RelatedInventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies View RelatedI am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.
I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.
When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.
I am trying to create an assembly. I want to copy the small threaded holes and position of the holes from the face of the large part and copy them to the circular part.
I want to establish a relationship so if the hole positions change on the larger part they will also change on the attached circular part.
I have been given the task of importing and editing an IGS sheet metal part. cannot get a feature tree.
Its a pretty basic sheet metal part just need to add few flanges, change hole/slot size. Its for a college project so I have to do it rather than just redraw the thing. I would also prefer to use inventor than solidworks (if I still have it on my laptop...).
[URL]
Using Inventor 2014 for some very simple (just a few component) models. When I use Studio to render an image, two objects are shown with a "cross" on them. The parts are nothing but extruded circles--nothing to them, so it's not clear to me why there are lines on their surface.
View 5 Replies View RelatedI have a panel with holes,cutouts and silkscreen
In the drawing the panel is detailed to show hole locations and sizes on one sheet and in another view @ 1:1 the silkscreen is shown.
The silkscreen is a feature on the panel, text either embossed or extruded .005" outward. The feature is colored (filled).
On my drawing all the silk screens show up like un-filled fonts. This really bothers some people and my task is to fill the fonts.
Also i need to get the silkscreen by itself and (suppress/invisible) remove the other features from the view.
Suppress will not work as the feature i am trying to show will also be suppressed. Visibility of features is not an option.
Q. HOW CAN I GET THE FEATURE SEGREGATED AND SOLID IN MY DRAWING? but still a feature of the part. i.e. i don't want to create an assembly with a panel and a silkscreen.
How do i suppress features in a view on the drawing?
I am using the Student version of Autodesk inventor 2013.I was able to use the simulation, stress analysis features for a period of 10 days from the day of installation but its not working now.I have tried reinstallation also. I am using a registered version only.
View 2 Replies View Relatedhow to create location box in autocad electrical using vb.net?
Bacause i want to add more features to that location box.
how to create location box using vb.net.
The small cylinder was made first, then projected it to a sketch, made offset, and made the big cylinder, but i want to leave only the big cylinder alone. i want to suppress the small cylinder, but when i suppress the samll one both get suppressed.
How can i break this link, which was made by the projected geometry?
Even when i select the projected circle, right click and select Break Link, they still behave the same.
want to delete holes (see picture), but also to keep other features below hole.
View 3 Replies View RelatedSearch for features by name from browser. I have seen a pair of binoculars on the top of the feature tree, can't figure out a easy use of it.
C1
Inventor Professional 2013
Vault Collaboration 2013
While labeling Multiple segments (or even single segments) only the LINE labels skip numbers if separated by a CURVE. The CURVES go sequentially but not the LINES.
View 1 Replies View Related