When I try to save my project as a jpeg or other, it always results in a different sized image from my project (e.g. an oval shape looks circular when saved). Could my image and canvas settings be bad (canvas size is 2880x1800)? How can I resolve this? I'm using CS4 on OSX10.5.8.Â
View 4 RepliesI have an image say 50Kb, what is the eaiest way to save that image too a Max 20Kb'
PS Cs2,
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
If I open a JPEG file of say 75kb, make some modifications and save at max. resolution (to avoid as much degradation as possible) it ends up 225kb. Question how would I retain the original 75kb? Why would max. add kb if there are only 75kb to begin with? I would assume the max. would leave it as close to the original as possible.
View 5 Replies View RelatedI'm using photoshop cs6 on windows 7.
Â
Ok so my image size is about 24x20 and when I save the output of the image is almost half the size. The project has a lot of details so it looks like a big blob shrunken down to half size. I've played around with the settings for hours in save for web option and I get the same results. how to save so the output is nearly the original size, or just so you can see the details!
I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
Spent 9 hrs creating a slideshow that I saved. Closed PSE 11 and reopened and can no longer find the slideshow. When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large". Is this my slideshow and if so how can I recover it?
View 1 Replies View RelatedI am working on the following image but the image that I'm working with on the screen is not the same as the output after I save it. What is happening and how can I fix this?
(the images have been reduced in size and quality so this is for illustration only)
When I save a picture it goes from 6mb to 700kb. Is this normal or do I need to do something different and does it effect the picture quality when printing?
View 3 Replies View RelatedI was trying to create a low-res version of an image, and saved over it by accident (didn't realize I was in the same directory).
I closed it of course, so I can't retrieve it that way. Is there anyway to dig it out of the photoshop cache?
[running photoshop cs3 under windows XP Pro/SP2]
I have a psd file with about 14 layers, a few of which are hidden. I merge layers and then save as a high-resolution jpg. I then open up the jpg in photoshop and it looks just fine.
However, when viewed directly from my pc in a browser (MSIE 7 or Firefox 3.0.3, either stand-alone or in an html shell), the image has a discernable dark magenta hue.
Originally, I mistakenly had an extra channel in the PSD file that I thought was causing the problem. But it's removed yet the problem remains.
I also saved as a GIF and PNG and the problem remained.
I recently was editing a image on adobe photoshop 7.0 and I was doing a great job I was almost done (took me around 4hours to do) The problem I had was there was a thunder storm, so some how the power went on and off in my house so I think I lost everything Is there any way to get the edited image that was creating back? Like is there a auto save program that if your computer shuts down Instantaneously is auto saves for you, like on Microsoft office 2007 programs?
View 22 Replies View RelatedI have received images from my client which are edited & saved in CS4. But when i m trying to open these images in IE its not opening, but it is opening in Firefox. Wat is the solution for this?? I m here attaching a file in which i have shown the screenshot of IE and Firefox. And also the properties of images saved in CS3 and CS4.
View 1 Replies View RelatedI rendered an animation and saved it as .avi file. But the file size limit to 0.99 GB so only first few seconds of the animation was saved.
what I can do to increase the file size limit so the animation can be fully rendered and saved?
I've used photoshop to paint for many years (I'm a production artist for children's television) and never had this kind of thing before. It could be a total coincidence, but it seemed only to get like this since I upgraded to Production premium CS6.
Â
I have the newest Nvidia drivers, the latest photoshop and production suite updates. I've tried turning off GPU acceleration and I've calibrated my monitors and cintiq several times using the Spyder 3 Elite calibration tools. I've created 8bit, 16bit and 32bit images and the problem persists no matter what. Other stats:
Â
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Video Card: NVIDIA GeForce GTX 280M
Â
This is a 16bit image saved as a jpeg, but still a relatively accurate example of what I see in photoshop. In fact it looks better here. It was created using a low opacity brush with hardness set to zero.
I've been having this problem for some time now. I edit my images and save them but the saved copies in their folders are always 1) darker and 2) with less color. However, when I put the images back into photoshop, they look as they did just before I saved them. Does anyone have any ideas on how to fix this or what might be causing it?
Also, when I do a lot of editing in one go, I get a message that I'm running out of memory on my C drive, even though photoshop is installed on my much larger D drive.
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
I have an Adobe Illustrator CS6 document with body copy set using 6.5 pt. Helvetica Neue LT Std. - Bold Condensed & Light Condensed.
Â
After saving the file as a PDF in Illustrator using the [Smallest File Size] setting, closing the file, and opening the newly saved PDF in Illustrator - the 6.5 pt. text is now 5.53 pt. with a vertical scaling of 117.65%.
Â
This PDF is for client review purposes - on screen or laser print - not for reproduction. We try to keep the file size as small as possible to make downloading and e-mail attachments manageable.
Â
In this case, my client is opening the PDF in Illustrator to double-check the text point sizes for legal & regulatory purposes.
If I save the same Illustrator file as a PDF using other settings like [High Quality Print], the text size is unchanged.
Â
 I was able to repeat the issue using Helvetica LT Std in place of Helvetica Neue LT Std.
Â
I have attached some screen shots for reference.
Â
Illustrator Source screen shot
Acrobat PDF screen shot
I found this older thread from 2011 where someone had the same issue - but was never resolved: [URL] ....
Is there also a shortcut in CS6?
View 3 Replies View RelatedCS6: why does a TIF image saved to Jpg format becomes so small?
tif = 292700 kB becomes Jpg = 936 kBJpg options: large file Quality 12, format option: Baseline standard.
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
Â
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Â
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
I think I accidentally changed a setting.
When I create a new transparent image the image goes straight to layer 1 instead of background. When I save or flatten the image it has a white background instead of a transparent like it should.
I'm trying to save a file as web content (either jpg or gif) but when I save the file it is much darker than the original.
If I view the saved version of the file in PS there are no issues, but once I view it in a browser, the issue arises.
Is there a way to control this? I've never had this problem before while working with photographs or other files.
For the record I'm using PS 6.0 for PC and the browser I'm using is IE 5.5.
I am importing images saved in both Raw and JPEG format at the time of capture.  There seems to be a color shift - toward green for the JPEGS and red for the Camera Raw images. Why is this happening?
View 4 Replies View Related1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
Can the image be saved with the annotations of the measure tool in PS Extended?
View 1 Replies View RelatedJust bought PSE11. Still using iPhoto as my organizer. But when I finish an edit and save, I can't find my image.
I understand that if I save without changing the file name or type, it should put it back in the same origin file.
I tried setting my save settings in PSE to write over original and it still didn't show up. I tried making a duplicate in iPhoto and editing it .... nothing.
In the destination box that opens upon asking it to save, everything looks good. ie it appears to be saving it in an extension on an extension of a numbered file in the iPhoto library.
I removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies View RelatedPs CS6
OS X 10.6.8
Â
There seems always to be an uncompressed compatibility image in 32-bit PSD and PSB, and in 32-bit layered TIFF. That's regardless of Maximum Compatibility being disabled when saving. If Maximum Compatibility is enabled, there correctly is an uncompressed composite in the file.Â
Â
If Maximum Compatibility is disabled, there's an overhead equivalent to an uncompressed image with the document's size. I reckon the all-white compatibility image is uncompressed! If any image should be compressed, that surely is it. What a ridiculous waste of storage space. An unnecessary consumption of hundreds of MB per document in many cases.
Â
This uncompressed compatibility image would explain why an embedded 32-bit PSB which stores the IBL of a 3D Layer consumes the enormous storage of a large uncompressed 32-bit image despite it being compressible to a few hundred KB.