Paint Shop Pro :: Picture Size Goes From 6mb To 700kb When Saved
Jan 8, 2013When I save a picture it goes from 6mb to 700kb. Is this normal or do I need to do something different and does it effect the picture quality when printing?
View 3 RepliesWhen I save a picture it goes from 6mb to 700kb. Is this normal or do I need to do something different and does it effect the picture quality when printing?
View 3 RepliesWhen I try to import from a twain bron. Canoscan lide 210 says the picture is 10x15 cm = about 4x6 inch. Looks alright. But after import the size of the picture in PSP x4 and X5 is 4x6 centimeters. So somewhere it's going wrong.
View 2 Replies View RelatedWhen photographing a tall object from the ground, for example the rectangle of a house wall, the picture perspective will be distorted in the sense that the bottom of the wall will be wider in the picture than the top of the wall.
Say, for example, that the bottom of the house wall in the picture is 1 inch wider than the top of the wall. Is it possible to increase the size of the picture gradually from the bottom to the top, from 0% of 1 inch at the bottom to 100% of 1inch at the top? So the end result in the picture will be an evenly sized wall from bottom to top?
PSP X4 does not save the last crop settings which I used. In older versions the program saved the last used settings (dimension of the crop frame in pixel) and this was a good thing. Now in version X4 this does not work anymore. Is there a setting to switch that on or is it a bug?
View 2 Replies View RelatedI have a workspace saved as Default.PSPWorkspace. Every time I start PSPX4 I have to select File > WorkSpace > Default.PSPWorkspace so that all the settings for Palettes and Toolbars are as I need them.
Is there any way to set a saved workspace to actually serve as the default without having to select it every time PSPX4 starts?
I can't open files saved in X4 in v9. I couldn't figure out the text tool in X4 & saved the file so I could finish in v9 but v9 says it is not a valid PSP file. This is very frustrating since I need to be able to use v9 until I learn X4. Second, I have 64 bit version of Thumbnail view installed but it still doesn't allow me to see all of my PSP files in Windows Thumbnail view.
View 7 Replies View RelatedOpened a jpg file ... cropped then saved as bmp to use as texture in another program.
In explorer folders view it shows but has a locked symbol in front of it.
Try to find it from another program and it does not show in folders.
Will Photoshop correctly open a psd file saved using PSP X16? Will all layers remain intact?
View 1 Replies View RelatedBut I have and EP3 and am using Olympus Viewer 2 to manipulate the RAW images, I then edit the TIFFs in PaintShopPro 4. I have also calibrated my Dell 2410 with SpyderPro4.
My challenge is that the image edited in OV2 looks very different when viewed in PSP 4. I think the issue is that OV 2 is embedding a color space of "sRGB IEC61966" not the profile I set up using Spyder (as shown in the information screen of the resulting TIFF). when I open PSP it then says it is converting the "sRGB IEC61966" color space to my Spyder profile.
I have set OV2 to use Color Management and to "embed profile when saved". The monitor profile selected is my Spyder profile. Is this a bug? Is there a setting I should use in PSP4? Or si the problem on OV2?
how to fade to transparency by myself I am left with a residue problem when saving to a different file format.
I took my square image and pasted as a layer. Behind this is a raster layer flood filled with black (As the image will be going onto a black t-shirt). I used a rounded rectangle selection tool to make a mask somewhere just inside the image borders. I then applied a Gaussian blur to the mask and it faded the edges of the image beautifully. I checked with the black background layer off and again it faded nicely into transparency.
Now my issue is that when I save it as a PNG file (with background set to transparency of course) and try to use it against various coloured backgrounds there seems to be a white glow around the edges where it is meant to fade out.
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies View RelatedI think I've found a major issue with saving .PNG files that have partial transparency in PSPx4
Essentially any opacity isn't saved correctly, and is made far too transparent. So anything with partial transparency is saved incorrectly.
I first noticed this when I saved a file to PNG that had a drop shadow - and the shadow seemed to have not been saved. In fact it had but the transparency was now so much higher it was almost invisible. Looking closer, all partially transparent pixels are not saved correctly.
This issue isn't present on x2 and PSP 9 (two old versions I've got).
I've done a simple test. Create a new image, transparent background. Fill with a colour at 30% opacity. Save as PNG, save as PSPImage. Resulting PNG looks completely different to the PSP image.
See the below screenshot, and also the but saved as PNG in PSP 9 (to show this is fine).
I'm always saving to PNG and this makes PSPx4 useless to me I'm afraid. I've checked the save settings and it's the same as PSP9.
I have an ancient version of Paint shop pro X. It worked fine for what I used it for-making note cards and simple stuff with photos. That was all fine until my computer died. OK I had the disc and install on new computer but now all the features do not seem to be working-ability to change color of the fill area etc.
Tried messing with that for a couple of days to see if I could get it to look like it did on the old computer-no such luck.
Now I download free trial of Paint shop Pro 6-great most of what I needed seem to be working and easy to do. But now I want to add picture frames and there is a very limited selection and when I tried to manipulate a previous version of a picture + frame+ texture only on the frame part-now the texture went all over the picture/space.
What gives here? I am very technically challenged and wish I could get my old version to work right and I would be happy. The layers of the new version give me a real headache and don't know that I can figure that out now-didn't need to do that on the old version. I was used to the old way and want that back on the new computer.....
I have PaintShop Pro x2 and x4 installed on different drives. Problem is that I cannot duplicate a photo in either programme! I chose "window>duplicate and nothing happens. What am I missing?
View 1 Replies View Relatedpossible to add to the length of my project by about 35 pixels. i was cropping the two halfs of my project, and i took the measurements from the wrong point of view. long story short, if i could increase the length at the base without stretching.
View 2 Replies View RelatedI did look through the FAQ but couldn't quite find what I was looking for, perhaps because I am not sure of the proper terminology.
I have attached a screen copy of the effect I want to achieve.
Basically I have a picture of a scene/building from the past and I want to merge the two into one picture with the same scenery is shown on the edges and the scene from the past, faded In towards the middle section of the image.
Can this be accomplished with Layers? or Maybe a Collage? or is it something else?
I no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
I am trying PSP 5 and have downloaded additional picture frames from an external sourse. I cannot find a folder named "picture frames" in the PSP 5 program files.
Where do I place these new templates?
I would like to clone one object from one picture to another. When I have 2 pictures side by side and I want to clone one object to the other pictures the percentages are not the same with each other and the object is out og proportion. How do I get both pictures with the same percentages? As an example maybe there's a fire hydrant and I would like to clone it to the other picture and have it look as a 1 to 1 ratio.
View 2 Replies View RelatedIt's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
I somehow managed to change the settings so that now when I open a file, I can't see the picture I want to edit. I get a black box with vertical colored lines through it. How do I get rid of this, or get back to the system defaults?
View 1 Replies View RelatedHow do I minimize one picture, in order to view two pictures is the same screen?
More details...In my previous version of PSP, when working on a photo, the tab at the top for the photo had the following options: Minimize ( _ ), Maximize ( [ ] ) and Close ( X ), similar to the options found in the upper right corner of most windows.
However, in X5, the picture window/photo tab only has the Close ( X ) option and no Minimize ( _ ) or Maximize ( X ) option.What am I missing or am I just daft?
I found being able to minimize multiple photos in the same window useful when pasting/cloming one image over another.Or, if I have multiple, yet very similar images, determining which is best without having to tab back and forth.
I took some pictures outside recently and when I looked at them later realized there were sun spots on them. I have Coral Paint Shop Pro x2 and how to remove this sun spots so I can salvage the pictures. Some of the spots are yellowish color and some are white. They are all on peoples legs so I have not been able to find a way to remove them. I have tried the cloning but it looks funny. I have also tried creating a new layer and removing the color yellow from the picture but that doesnt seem to work either.
View 2 Replies View RelatedI know that x6 comes with limited Picture Frames. I loaded, via preferences, the x5 set of frames that I had been using. All was well. Now my frames have vanished. (All but the original limited set). I've tried to reload them into x6. But x6 is refusing to find them. I'm using 64bit. Was before when all was well. Why can't preferences find them now? The thing is I rarely use Picture Frames so I may have forgotten how to reload them via Preferences.
(For interest sake I fired up x5 and the frames have also gone from it. The location was /My Documents/Corel Paintshop Pro/16.0/Picture Frames. The files are still there).
In the picture attachted there is a compostition I made through PhotoScape (I just have come from this software). How to do it in PaintShop X4. My traditional-old steps:
a) First I applied in each photo picture a picture frame (like a shadow).
b) Second I join all photo picture and logos in a big picture.
c) I inserted titles (people name) bellow each photo.
d) To conclude I applied a picture frame to the big picture (in PhotoScape this frame is called “shadow border”).
Just a comment: It seems Corel PaintShop has mostly “cartoon” picture frames. I tried to find out something like “PhotoScape shadow border” without success. Is there something similar available in PaintShop? Is it possible to add new picture frames to the PaintShop library?
I have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies View RelatedI have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies View RelatedI need to create a smoke affect over a picture. It needs to be transparent. I've tried a few approaches but my brain is having fits trying to figure it out. Google has drawn blanks.
View 3 Replies View RelatedI want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
A user in Flash gets a picture, prepared with the inside of the box blank. The user selects a jpg color picture and fills the box. This is done by creating a point zone. (1) a way for flash to be texturized or painted.
No 1 is the box after is filled by the user. That is now.
No2 is the image, if I make the background blank as well as the inside.
No3 Is the image I need (nothing around it)
No 4 Is the background
No 5 Is if I use picture No1 (as I am doing now)
No6 Is if I use picture No2 (blanking the surrounding area as well the inside of the box)
No 7 Is I what I want.
Question: How do I convert No1 without the area around to look like and be like No3 as a symbol ? By converting the image to a symbol or an Icon, then how can this be accomplished?
I have a problem where no arrow shows next to the picture tube. I went to the PSP folder and they are there in folder 10. How do I get them into the program so the arrow shows up and I can add the picture tube I want to my picture. I am running Windows 7 home premium. x64
View 2 Replies View Related