PSP X4 does not save the last crop settings which I used. In older versions the program saved the last used settings (dimension of the crop frame in pixel) and this was a good thing. Now in version X4 this does not work anymore. Is there a setting to switch that on or is it a bug?
View 2 RepliesA digi image, cropped (crop tool), resized (resample), and saved (save as). Everything on 'default' (usual settings for this) or as I would like. Close and re-open, the image shows as the cropped image, but the thumbnail is the original.
I bought a new camera card today, having run out of settings to try. Took a pic, copied over, and it cropped and saved fine. So I went back to those taken yesterday, still full image thumbnail. Took new ones on new card, but full image thumbnails. Recropped the original photo that saved earlier today with cropped thumbnail - the full image is now in its thumbnail.
I have a workspace saved as Default.PSPWorkspace. Every time I start PSPX4 I have to select File > WorkSpace > Default.PSPWorkspace so that all the settings for Palettes and Toolbars are as I need them.
Is there any way to set a saved workspace to actually serve as the default without having to select it every time PSPX4 starts?
I can't open files saved in X4 in v9. I couldn't figure out the text tool in X4 & saved the file so I could finish in v9 but v9 says it is not a valid PSP file. This is very frustrating since I need to be able to use v9 until I learn X4. Second, I have 64 bit version of Thumbnail view installed but it still doesn't allow me to see all of my PSP files in Windows Thumbnail view.
View 7 Replies View Relatedhow to crop a circle in Jasc Paint shop pro 9
View 12 Replies View RelatedThis may or may not be an issue. If a crop size is set for a source image and "Crop As New Image" is clicked, the NEW cropped image will appear, however the Crop frame appears on the NEW image only scaled smaller. Is that normal? I'd not necessarily want to crop the NEW image a second time immediately afterward. This seems like strange, illogical behavior.
View 4 Replies View RelatedI'm having an infuriating problem with the crop tool. I click on the side bar to crop an image, set the ratio, then left click and hold on the image to either move the selection or expand/contract it and PSP crops the image before I can do anything.
View 5 Replies View RelatedWhen I save a picture it goes from 6mb to 700kb. Is this normal or do I need to do something different and does it effect the picture quality when printing?
View 3 Replies View RelatedOpened a jpg file ... cropped then saved as bmp to use as texture in another program.
In explorer folders view it shows but has a locked symbol in front of it.
Try to find it from another program and it does not show in folders.
Having difficulty setting the CROP tool outlines. It seems to snap to the CENTER of pixels? and the edges are difficult to grab, especially when zoomed way in to the corners/pixel level. Also dragging the outline edges seems sluggish and I don't see four numerical readouts in the CORP tool palett like earlier Jasc versions.
p.s. I almost always crop to the hearest 5 pixels, i.e. 675x495.
PSP is and has always been THE best graphics app with a truly intuitive interface and useful set of features & tools.
I have been using it for many, many years... sniffed around other products, but always returned, fully satisfied with what I can achieve. I've also written a suite of scripts to further enhance my use of it alongside my photography hobby.
HOWEVER... since Corel took it over and the start of the X series, there has been a serious and very annoying omission concerning the Crop tool. Previous versions up to v9 allowed the user to grab hold of the edges of the crop box ANYWHERE along ANY side, and drag/extend/reduce the size of the box. This allowed us photographers to zoom in to pixel level and grab any part of the visible box to adjust the crop dimensions very accurately. This is a very important feature for photographers.
The new X interface has changed the crop box to 'vector node handles' only for adjustment, which are not always visible when zoomed in. This means that instead of being able to align the box accurately to an image feature or row of pixels, you have to zoom out until you can find the nearest handle to use, or scroll up/down left/right, which either takes you away from the area you want to work on, or zoom too far out to see the detail you want for alignment.
option/preference to ditch the vector handles and grab the sides as before. I know you may think it a backward step, but you've taken away the very function that photographers need for cropping a composition, which is available in other products.
I am PaintShop beginner.
When I tried to crop picture, I couldn't find option to crop through a rounded (circle) shape (just rectangle seems to be avalilable).
1) How to crop using rounded shape?
2) After crop rounded, how to save just the rounded picture? Its because when I use Photoscape (I come from this software) it crop rounded, but save with a white retangle background? So I just want the rounded picture
I want to take my out of camera image, which is at 314ppi at about 9x12 and crop it to 8x10 at 300ppi. But, when I go to the crop tool, and click 8x10 preset, the resolution is set at 72ppi, and i can't see how to change that. So, the preset crop tool gives an outline of the crop area that is very small. The picture itself when it comes up is something like 33 " x 38" at 72ppi. If I go into resize image, it gets time consuming; you'd think I could just select the 8x10 preset at 300ppi and get a file that is about 2400 x 3000 ppi....8x10, 300ppi.
View 4 Replies View RelatedI created some crop preset sizes that I no longer need, but I can't figure out how to remove them from the dropdown list of crop sizes. Reset to Default doesn't refresh the list.
View 4 Replies View RelatedVersion: PSP x4 w/ SP1
O/S: Win 7 Pro
I've been using x4 for several months, and in the past few weeks I've been encountering strange artifacts of the Crop tool. If I move the crop rectangle, it sometimes (but not always: see below) leaves a black line or lines of varying thickness where the rectangle had been. Here are a few possible clues:
- It appears to happen only with images that contain layers.
- An F5 refresh does not get rid of the artifacts.
- Flattening the image does.
- It appears, I think, to occur only when moving the crop rectangle (not resizing), but I won't swear to that.
- I have on at least one occasion been able to save the file with the lines as part of the image.
Will Photoshop correctly open a psd file saved using PSP X16? Will all layers remain intact?
View 1 Replies View RelatedBut I have and EP3 and am using Olympus Viewer 2 to manipulate the RAW images, I then edit the TIFFs in PaintShopPro 4. I have also calibrated my Dell 2410 with SpyderPro4.
My challenge is that the image edited in OV2 looks very different when viewed in PSP 4. I think the issue is that OV 2 is embedding a color space of "sRGB IEC61966" not the profile I set up using Spyder (as shown in the information screen of the resulting TIFF). when I open PSP it then says it is converting the "sRGB IEC61966" color space to my Spyder profile.
I have set OV2 to use Color Management and to "embed profile when saved". The monitor profile selected is my Spyder profile. Is this a bug? Is there a setting I should use in PSP4? Or si the problem on OV2?
how to fade to transparency by myself I am left with a residue problem when saving to a different file format.
I took my square image and pasted as a layer. Behind this is a raster layer flood filled with black (As the image will be going onto a black t-shirt). I used a rounded rectangle selection tool to make a mask somewhere just inside the image borders. I then applied a Gaussian blur to the mask and it faded the edges of the image beautifully. I checked with the black background layer off and again it faded nicely into transparency.
Now my issue is that when I save it as a PNG file (with background set to transparency of course) and try to use it against various coloured backgrounds there seems to be a white glow around the edges where it is meant to fade out.
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies View RelatedI have done this before but I need to crop an image to 2X3 for a yearbook photo. When I go to the crop tool it doesn't stay at 2X3 but when I start cropping the picture large numbers appear in the crop box for width and height.
View 2 Replies View RelatedSuddenly today when I use the "Section tool" on a photo and then 'Crop to Selection' a new image is produced of the cropped selection and the old image remains. I don't want this and it has never happened before in the years I have been using PSP.
I want the existing image to be cropped and then I will save it.
How I can reset the "Selection tool' to do what it has always done? BTW I had earlier today used the "Crop" tool and ever since the 'Selection tool' has been creating a new image.
I've got some pictures and Corel Paintshop photo pro x3. It's a nice program but I cant figure out how to crop photos into shapes without using the "lasso". My hand isn't so great with fine shapes so any way to cut a shape by using one of the presets?
View 1 Replies View Relatedin PSP X3 I got several options when I selected the crop function. I saw and could change the count of pixels in X and Y direction and so on. All this options have gone in PSP X4. Or is there a setting I have to change?
View 2 Replies View RelatedI do not use most of the default presets in the crop pallet. I use my own and when I go to the Corel X4 presets dir. Mine are there but the default set are not listed (hidden files?). How can I delete the ones I do not want from the default set so that the ones I have created stay on top?
View 1 Replies View RelatedI think I've found a major issue with saving .PNG files that have partial transparency in PSPx4
Essentially any opacity isn't saved correctly, and is made far too transparent. So anything with partial transparency is saved incorrectly.
I first noticed this when I saved a file to PNG that had a drop shadow - and the shadow seemed to have not been saved. In fact it had but the transparency was now so much higher it was almost invisible. Looking closer, all partially transparent pixels are not saved correctly.
This issue isn't present on x2 and PSP 9 (two old versions I've got).
I've done a simple test. Create a new image, transparent background. Fill with a colour at 30% opacity. Save as PNG, save as PSPImage. Resulting PNG looks completely different to the PSP image.
See the below screenshot, and also the but saved as PNG in PSP 9 (to show this is fine).
I'm always saving to PNG and this makes PSPx4 useless to me I'm afraid. I've checked the save settings and it's the same as PSP9.
PSP loses image with Crop under the following circumstance:
Make a selection --> Paste as new Image --> Make a Selection but then "accidentally" Move the selection, Choose the crop tool, Snap crop rectangle to current selection --> Apply.
My image now disappears: all gone ... so UNDO!
My scenario: PSP X3 Windows 7, lots of memory.
Trying to separate & cleanup many old photos scanned several at a time at 300x300 on an 8.5"x11" size scanner. So I select, copy, paste as new image for each photo.
When I use a vertical text the letters are always so far apart and they get mishap when I squish them closer and then have to expand horizontally .
Any setting to solve this problem other than putting each letter on a separate layer?
Currently using X3,X4,X5
I recently had to remove some sensor dust spots from three bracketed images I was using for HDR. I used the "Makeover" tool on each image. I understand that in Lightroom, you can copy setting like this from one image to others. That would save a lot of time rather than removing the spots from each individual image.
View 3 Replies View RelatedWhenever I bring up the crop tool I see a dialog box covering part of the image. I never use it. Is there a way to hide or get rid of it?
View 3 Replies View RelatedEvery time I use adjustments like brightness/contrast, PSP seems to remember those settings, because the next time I use them, they start with the same values as I used before. But I do not want that. This way I always have to move all sliders to their zero position before adjusting. Every image needs different values and I always like to start from scratch (zero values).
So, how can I tell PSP not to remember those settings every time?
In the older versions adjusting the settings to negative numbers was as easy as highliting the text, clicking on the lead button and entering -0.075 Now, I can't adjust to negative line spacing.
View 7 Replies View Related