I am PaintShop beginner.
When I tried to crop picture, I couldn't find option to crop through a rounded (circle) shape (just rectangle seems to be avalilable).
1) How to crop using rounded shape?
2) After crop rounded, how to save just the rounded picture? Its because when I use Photoscape (I come from this software) it crop rounded, but save with a white retangle background? So I just want the rounded picture
I've got some pictures and Corel Paintshop photo pro x3. It's a nice program but I cant figure out how to crop photos into shapes without using the "lasso". My hand isn't so great with fine shapes so any way to cut a shape by using one of the presets?
View 1 Replies View RelatedI have an image that I would like to have rounded corners with a transparent .png background. What is the procedure to create this?
View 5 Replies View RelatedAttached there is a picture made through PhotoScape where big outline rectangle is rounded. I am trying to do similar one through PSP. Drawing I found some difficulties:
a) How to create a rounded rectangle? I tried to use “rectangle tool” but I couldn’t find adjust to make it “rounded”.
b) Considering the possibility to create a “rounded rectangle” and applying “shadow drop” on it, will the shadow appear “rounded” as well? Or is there something to do?
c) In some tests I made applying “shadow drop” on a normal rectangle (as a new layer) the only adjust I could make after that was on “shadow size” (dragging the mouse). I couldn’t find a way to access effect properties to readjust attributes as “opacity” or “blur”. How to come back to “shadow drop” configuration panel (attached) to readjust settings as opacity or blur?
As illustrated in attached image, I have several pictures (each one as different layer) in a same PSPIMAGE file. I would like to make “rounded” the border/edge of the all pictures (currently they are squared). How could I proceed with this operation?
View 2 Replies View RelatedHow do you crop a photo into the shape a heart
View 7 Replies View RelatedI was wondering if there is an option in Paint.net to crop pictures not in the usual rectangle shape but like using scissors, like someone that cuts a drawing he did on a sheet of paper with scissors, which means to crop in any shape that I want.
View 4 Replies View Relatedhow to crop a circle in Jasc Paint shop pro 9
View 12 Replies View RelatedThis may or may not be an issue. If a crop size is set for a source image and "Crop As New Image" is clicked, the NEW cropped image will appear, however the Crop frame appears on the NEW image only scaled smaller. Is that normal? I'd not necessarily want to crop the NEW image a second time immediately afterward. This seems like strange, illogical behavior.
View 4 Replies View RelatedI'm having an infuriating problem with the crop tool. I click on the side bar to crop an image, set the ratio, then left click and hold on the image to either move the selection or expand/contract it and PSP crops the image before I can do anything.
View 5 Replies View RelatedHaving difficulty setting the CROP tool outlines. It seems to snap to the CENTER of pixels? and the edges are difficult to grab, especially when zoomed way in to the corners/pixel level. Also dragging the outline edges seems sluggish and I don't see four numerical readouts in the CORP tool palett like earlier Jasc versions.
p.s. I almost always crop to the hearest 5 pixels, i.e. 675x495.
PSP X4 does not save the last crop settings which I used. In older versions the program saved the last used settings (dimension of the crop frame in pixel) and this was a good thing. Now in version X4 this does not work anymore. Is there a setting to switch that on or is it a bug?
View 2 Replies View RelatedPSP is and has always been THE best graphics app with a truly intuitive interface and useful set of features & tools.
I have been using it for many, many years... sniffed around other products, but always returned, fully satisfied with what I can achieve. I've also written a suite of scripts to further enhance my use of it alongside my photography hobby.
HOWEVER... since Corel took it over and the start of the X series, there has been a serious and very annoying omission concerning the Crop tool. Previous versions up to v9 allowed the user to grab hold of the edges of the crop box ANYWHERE along ANY side, and drag/extend/reduce the size of the box. This allowed us photographers to zoom in to pixel level and grab any part of the visible box to adjust the crop dimensions very accurately. This is a very important feature for photographers.
The new X interface has changed the crop box to 'vector node handles' only for adjustment, which are not always visible when zoomed in. This means that instead of being able to align the box accurately to an image feature or row of pixels, you have to zoom out until you can find the nearest handle to use, or scroll up/down left/right, which either takes you away from the area you want to work on, or zoom too far out to see the detail you want for alignment.
option/preference to ditch the vector handles and grab the sides as before. I know you may think it a backward step, but you've taken away the very function that photographers need for cropping a composition, which is available in other products.
I want to take my out of camera image, which is at 314ppi at about 9x12 and crop it to 8x10 at 300ppi. But, when I go to the crop tool, and click 8x10 preset, the resolution is set at 72ppi, and i can't see how to change that. So, the preset crop tool gives an outline of the crop area that is very small. The picture itself when it comes up is something like 33 " x 38" at 72ppi. If I go into resize image, it gets time consuming; you'd think I could just select the 8x10 preset at 300ppi and get a file that is about 2400 x 3000 ppi....8x10, 300ppi.
View 4 Replies View RelatedI created some crop preset sizes that I no longer need, but I can't figure out how to remove them from the dropdown list of crop sizes. Reset to Default doesn't refresh the list.
View 4 Replies View RelatedVersion: PSP x4 w/ SP1
O/S: Win 7 Pro
I've been using x4 for several months, and in the past few weeks I've been encountering strange artifacts of the Crop tool. If I move the crop rectangle, it sometimes (but not always: see below) leaves a black line or lines of varying thickness where the rectangle had been. Here are a few possible clues:
- It appears to happen only with images that contain layers.
- An F5 refresh does not get rid of the artifacts.
- Flattening the image does.
- It appears, I think, to occur only when moving the crop rectangle (not resizing), but I won't swear to that.
- I have on at least one occasion been able to save the file with the lines as part of the image.
I have done this before but I need to crop an image to 2X3 for a yearbook photo. When I go to the crop tool it doesn't stay at 2X3 but when I start cropping the picture large numbers appear in the crop box for width and height.
View 2 Replies View RelatedSuddenly today when I use the "Section tool" on a photo and then 'Crop to Selection' a new image is produced of the cropped selection and the old image remains. I don't want this and it has never happened before in the years I have been using PSP.
I want the existing image to be cropped and then I will save it.
How I can reset the "Selection tool' to do what it has always done? BTW I had earlier today used the "Crop" tool and ever since the 'Selection tool' has been creating a new image.
in PSP X3 I got several options when I selected the crop function. I saw and could change the count of pixels in X and Y direction and so on. All this options have gone in PSP X4. Or is there a setting I have to change?
View 2 Replies View RelatedI do not use most of the default presets in the crop pallet. I use my own and when I go to the Corel X4 presets dir. Mine are there but the default set are not listed (hidden files?). How can I delete the ones I do not want from the default set so that the ones I have created stay on top?
View 1 Replies View RelatedPSP loses image with Crop under the following circumstance:
Make a selection --> Paste as new Image --> Make a Selection but then "accidentally" Move the selection, Choose the crop tool, Snap crop rectangle to current selection --> Apply.
My image now disappears: all gone ... so UNDO!
My scenario: PSP X3 Windows 7, lots of memory.
Trying to separate & cleanup many old photos scanned several at a time at 300x300 on an 8.5"x11" size scanner. So I select, copy, paste as new image for each photo.
How to create and use new preset shapes in PSP8.
For example, I opened a large arrow, changed its fill color, and followed the instructions to save it (using File > Export > Preset Shape) with the name My Yellow Arrow.
That appears in the small Presets window: But there's no sign of a big yellow arrow in the drop-down list:
(The program won't let me enlarge that window, or list the entries by name.)
Same with my empty circle, 'MyEmptyCircle#1'.
Whenever I bring up the crop tool I see a dialog box covering part of the image. I never use it. Is there a way to hide or get rid of it?
View 3 Replies View RelatedI have been trying to select an ellipse selection area around an oval shaped logo to create a mask or transparent background. I am trying to use the ellipse selection tool. When I use the ellipse selection tool, it makes an out of control shape that goes off the edges with a marquee and there is no way to adjust it. So then I created a selection shape using the vector shape tool, but I couldn't do anything with the selection after making it a raster object. I tried to flood fill background area...mouse pointer is there with bucket but nothing happens. Nothing seems very intuitive, clear or logical to me. you pick a shape and then use handles to adjust it to the actual shape is what seems intuitive, but that is just too easy.
View 2 Replies View RelatedIn Paintshop Pro X5 Is it possible to change the color of preset shape like arrows. Or is there another way to make arrows in different colors.
View 1 Replies View RelatedI can't seem to export more than 1 shape file in PSP X6. When I open a new 200x200 pixel vector file and use the pen tool to create a shape it will not save internally by PSP x6 under any name but "New Path" no matter what name I give the file or the vector layer name.
Whenever I export a second shape I get a pop-up window titled "Export Shape Library" that asks for a name for my new shape. When I enter a unique file name for my new shape I get another pop-up window titled "Duplicate shape names" with a listing of the supposed duplicate file(s). The only name showing though is "New Path". I have never named any of my shapes "New Path" nor named any of my vector layers "new Path" yet I always get this Duplicate shape names pop-up window containing "New Path" as the offending name to resolve.
Whenever I try to use the one shape I did save as "MyShape.PspShape" is shows up as "New Path" in the Preset Shapes listing. I accessed my only saved shape by selecting Preset shape tool/Preset shape then selecting the Shape list(from the tool options palette) and then select the Category "Preset Shapes" from the drop down. It shows up with the name "New Path".
Is there some setting I'm missing so "New Path" will not be the only name saved internally by PSP X6?
I've tried deleting all the files I've created in PSP X6 with the extension ".PspShape " and then restarted PSP X6 and I still am stuck with the "New Path" problem when I export a shape. The one shape I can export is saved on my hard drive with the unique name I gave it but PSP X6 still identifies the shape as being "New Path".
I am tracing a simple raster shape in a new vector layer and I want to know how I can remove a portion of the content from the center. Picture a shape like a letter "o" where there is shape data comprising the perimeter ring, and no shape data in the center. I trace the perimeter of the the shape making a solid eliptical-type shape, but I need to then remove a portion of the center of the shape so that only the ring of the O has vector data. How can I do this?
View 1 Replies View RelatedPSP X3 is usually very stable but occasionally when I use the Preset Shape Tool to overlay an arrow onto my image, it freezes permanently. Waiting it out in the hope of self recovery doesn't work. I'm running X3 on a Windows 7 Ultimate Dell Studio 17 laptop, 32 bits, 4 GB RAM.
View 3 Replies View RelatedI have a rectangle that is 400px width by 200px height.Now, I have used just the pen tool to create this. I have a stroke on it and a fill, both being the same colour.What I want to do is add some random shape INSIDE the FILLED rectangle, but I want that to be transparent.
View 7 Replies View RelatedI just bought PaintShop Pro X4 and love it. However when I make a preset shape and Export to shape it goes to C:UsersLynnDocumentsCorel PaintShop Pro14.0Preset Shapes
When I go to Custom Preset Shapes to test it, its not in there. I even copied it to other folders in psp.
Where can I find a preset shape of a ogee curve. It's sort of a slanted S. I've attached an image of one. Lacking a shape, how to draw one using PSP X5. I used autocad and converted the DWG to a JPG file.
View 5 Replies View Related