I am trying to make a typical column and row line layout for a roof plan. I know in acad architecture this is very easy. I am using regular 2011. I went to one of the preset palettes and saw a detail grid. What is that even used for? I basically draw them out at this point in a template.
View 9 RepliesI am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
planning consultant has asked me to show the roof pitches on a site plan.
View 9 Replies View RelatedI have drawn up a roof plan and want to section it off in big areas. Is it possible to draw a rectangle 48'x200' and have that shape fill the entire roof as close as possible. Basically i need my roof hatched w/ a 48'x200' rectangle.
View 5 Replies View RelatedAttached is a small scale sketch that I'm trying to work with.
Drawing3.dwg
I want to make a block to automate the design of typical cross-bracing connection plates relative to the angle of the x-brace. Since the angle varies from one structure to another, I need a quick way to draw these.
Make a dynamic block that would locate to the intersection of the beam and the x-brace. Then I'd adjust a "rotating reference line" from the block to align with the x-brace and then offset the plate edge to mate with the beam web. Sounds easy, but...
The parts that I need dynamic are:
1) the edge of the plate that mates to the beam web (since different beams have differing web thicknesses - this needs to be adjustable).
2) the edge of the beam flange (to make the line type hidden below the beam flange)
3) the rotation of the reference line to align with the cross brace line (so the holes are properly aligned)
I was originally trying to achieve this with a rotate parameter, but had no luck. So I just thought of replacing the rotate parameter with a polar stretch parameter and it's the closest I've been to resolving the problem, but there's still a funny quirk. When I align the reference line in the block to the cross brace angle, the two other adjustments (web and flange locators) rotate too and become skewed. How can I keep those other two beam adjustments horizontal?
I need to show column locations in a Plan (overhead) view. The columns are so small that they don't show up very well. Is there an "automagic" (I'd prefer not to have to manually place some kind of sketched symbol on each columns linework) way to do a PART REP (so-called) in a drawing?
I'm using 2012 Premium.
I have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
I need changing the line weights.I was given an AutoCAD 2009 file that already had the drawing created. In the Model space, the drawing has been created on Layer 0. Some of the other lines have a different layer - but most of it is created on Layer 0.My manager has asked me to simply make some of the lines bold and leave the rest as is.
When I turn on the LWT button at the bottom of my program, the line weight is extremely bold (shows "By Layer" for the line weight). I have gone back to each layer to select a thinner line weight and saved the drawing. However, when I go to print, the line weight defaults back to the “By Layer” line weight.
do I need to be in Layout space to make these changes permanent?
I have then created a new layer (with a new colour) and selected my preferred line weight – and changed the lines that I want to be thicker, to the new layer I created. When I go to print, I went into my printer settings and insured that the new layer I created and colour has the preferred line weight I want. However, when I preview my drawing, it has made all the other layers thicker, and the ones I want thinner.
Should I follow the previous forums and threads using the pline and pline edit?
creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedI am creating a plan of an existing flat roof. The building is rectangular but has a large notch on one long side so the plan is kind of u-shaped. The slope is to the center with a single valley. When I put a split line down the middle it creates plans and valleys to the sides of the notch. How can I eliminate these planes? The entire north half slopes to the center. When I set the sides to "define slope" I get "slab edit failed" message.
Note, the south hatched section is a mansard style clay tile roof. There are parapets at the corners that wrap into the roof. How to I notch the sloped roof?
Is there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?
View 3 Replies View RelatedIs there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedWhen creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedI am designing a city with leaf-like layout. I've across a problem in the very beginning which is that i can't seem to understand the geometry involved in here. Let's i want to make a leaf shaped town such that it can have any desired area e.g. 800 acre with the same dimension like the leaf that added below. While experimenting with arc tool I've so far been able to do it but i would like to know the exact ways to do it.
Leaf.JPGGreen-Leaf-Texture-by-SpiralGraphic-on-deviantART.jpg
I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies View RelatedI am trying to get my roof to show the slope of the tapered insulation layout. See
RoofSlopes.png
This is done with lines currently. When I try to modify the sub elements to get the look I get a bunch of lines that aren't needed and can't seem to remove them. See
RevitRoofSlopes.png
How to have success using the modify sub-elements tool for Roofs? The Wiki help shows rectangles and squares, not every roof has that shape.
I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedWe using CODEBOOK to generate the layout plan, elevation. When we insert form CODEBOOK this alert appear.
Last time, we work with ACAD 2011 normally. Got the problem when upgrade to 2013.
See the attached.
i dont know how to make a roof in autocad 2010, what is the basic step?
View 9 Replies View RelatedI would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedI create a column graph, I set my column styles, modify the text and other attributes to how I want them to look but if I change the data the whole graph keeps reverting back to the basic chart. Is there anyway to stop this because its really irritating when I need to create a set of 20 graphs.
View 2 Replies View RelatedI quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies View RelatedI am using 2011 and have created a project for a 2 story structure. I have constructs for each floor, each floor slab and roof slab.
In which construct do I apply the roofline command? I am unsuccessful so far. Does the roof slab need to be in the same construct as the walls?
I am using AutoCAD Architecture 2012.
I built some walls and a roof slab using the wall, door, and roof slab tools in the build section of the ribbon. I drew a section plane and activated live section. The walls and roof did not cut away and they do not show up when i use the sectionplanetoblock command.
Is there a setting I need to change to make the walls and roof susceptible to being cut using the sectionplane command?
1.How can I edit the roof in attached dwg to be like in attached jpg?
One option I think it would be to convert it to roof slab.
What is the disadvantage (if any) to convert ia roof to roof slab?
Can I create it in other way ?
2. In section 2, the first floor walls ends in 90 degrees angle at the roof. Can the walls be edited so that the joint line with the roof follow the roof slope?
I want to make a steel deck roof with mineral wool insulation on top. My problem is that I don't know how to do the metal deck.
It should be a slab, a roof slab or a structural member? How do I create it? I attached a drawing with how it should be.
I would like to place a parameter in the title block to indicate the view in the plan layout.
View 1 Replies View RelatedI am trying to join line in different plan. but i cant join many line in this option. any other method. thats line used for sweep.
View 1 Replies View RelatedI am stuck on how to put a gable end on a pitched roof.
View 1 Replies View RelatedI am trying to make a macro that adds the vendor column to the end of a parts list, sort by it first, then by part number, renumber the parts list, then save the overrides to the BOM. Everything works great except for saving the overrides to the BOM. The item number sort order gets jumbled back up. I am using Inventor 2008 Pro SP2. Below is the
Public Sub SortPartsList()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oPartsList As PartsList
Set oPartsList = oDoc.ActiveSheet.PartsLists.Item(1)
Dim oPropsets As PropertySets
[Code]...
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View Related