AutoCad :: 2013 Text Screen Scrolling?
Dec 12, 2012
Noticed the 2013 text screen? Noticed how it's not showing its scroll-bar(s) ... well that's only 50% true. The vertical is only hidden - move the mouse over it and it appears.
But what happens if you want to read something which is too long for a line? Say you've listed the DXF codes of something by using the lisp entget function?
Previously if the line was too long it would get wrapped (wrapped to short yes, but at least readable). Now that line does not wrap in the text screen, but there's also no horizontal scroll bar so you can "pan" right to see the rest of the line. The only place I can see that is in the command palette.
View 8 Replies
ADVERTISEMENT
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Apr 30, 2012
if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
View 9 Replies
View Related
Apr 20, 2009
having scrolling text within the LCD screen of the attached photo. I already know how to create the animation, but the problem is that I cannot keep the text visible only in the LCD screen and not on the outside. I've tried a layer mask on the Text layer in order make text appear in the screen, but obviously that didn't work. lol
I have just about every object in the picture on a different layer. The Green Screen, Scan Lines, Metal, buttons, etc.
I'm using CS4
View 2 Replies
View Related
Jan 16, 2013
It's been a while since being on PDN and I can't find the tutorial where you have different colors scrolling horizontal or vertical within the text. Think you created a .gif file to do this.
View 7 Replies
View Related
Nov 11, 2011
Is there any way to make scrolling text/animations(falling snow, ect) on paint.net? Like, no html css?
View 2 Replies
View Related
Jan 31, 2014
For my project I created a chat window where the spoken text and questions are written down.
The window is limited to 3 lines, and each character and line is written itself, using the opacity text animation and its offset value. (like typewriting) how can I drop the first line when a new one starts and push the remaining 2 lines up? The only solution that i thought about is moving the whole textlayer in a mask upwards, but i think there is a much easier solution around.
View 1 Replies
View Related
Oct 8, 2013
When I had a virus removed from my computer, I believe it may have corrupted/deleted some of Photoshop Element 8.0's files. While the program still runs, there are some things out of place, in particular a lot of scroll bars are missing and scrolling through the text-box font drop down window is completely disabled.
Is there a software patch that could potentially fix this? Or should I just uninstall/reinstall the program?
View 4 Replies
View Related
Mar 29, 2012
My welcome screen is blank.
View 9 Replies
View Related
Sep 24, 2012
I had a valuable program that used the screen menu to insert blocks to aid in creation of architectural details. Now that the screen menu is no longer supported, is there anyway to run a script type of menu that points to various other menus?
I checked the only reference to screen menus. However, there was no reference to screen menus in either comment.
View 2 Replies
View Related
Apr 25, 2012
After just installing 2013, I decided to change the screen appearance and move the command line into its traditional area at the bottom - I over dragged and it disappeared off the screen. I have tried CTRL+9 and using the Ribbon Commands and nothing seems to work.
I have looked at the Preferences and cannot find anything to indicate the commandline or how to customize with the exception of colour and text colour!! Where it has gone and how do I get it back?
View 9 Replies
View Related
Nov 29, 2012
We are in the process of upgrading from AutoCAD 2010 to 2013. The print screen key on the keyboard will not work in the 2013 version (using Snagit to capture the screen image). Changing the hot key (in Snagit) works but I'm trying to keep the same workflow for my 300 plus Users.
View 2 Replies
View Related
Jun 16, 2012
Where can i find the "plug ins" i have added to the autocad in the classic screen, (and their symbols also)?
(In the other screens there is a special "tab" named "plug- ins").
View 1 Replies
View Related
Jul 13, 2012
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies
View Related
Jul 18, 2013
I have a drawing and I have to show the critical points printing the coordinates in the screen:
Is there a way that AutoCAD create text with the coordinates that I can capture with any (ID for example) command?
View 1 Replies
View Related
Apr 23, 2013
I have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies
View Related
Jan 8, 2014
The user has Autocad 2014 64 bit Service Pack 1 running over Windows 7 Pro. Everything is working fine until she receives .dwg files from a supplier that uses Autocad 2010. When she opens those files, the screen is empty, no crash/freeze, no error message, just a black background. The other opened files are still there in the background.
The only way she can open the file is by asking a colleague, also running Autocad 2010, to open the file and convert it using the WBLOCK command. After the conversion the Autocad 2014 user can open the file without issues.
View 3 Replies
View Related
Sep 25, 2012
Now that I know how to get my screen menu to appear, I would like to edit the standard screen menu to one I replaced it with in previous versions. In the past, I would edit Acad.mns or Acad.mnu and replace the screen menu section with my new screen menu.
Now Acad.mns and mnu don't exist and I presume I have to customize Acad.cuix, except I can't find any reference to screen menus in the cui editor to be able to customize the screen menu.
View 9 Replies
View Related
May 16, 2012
I loaded autocad R2013 and went into the .cui dialog box to look for the screen menu section. It used to be under the legacy portion but it's no longer there. I've been looking all around to try and find where it's at.
View 4 Replies
View Related
Jul 13, 2012
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies
View Related
Jul 10, 2013
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
View 6 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Sep 4, 2012
Just installed product design suite 2013 without issue, however when I try to run Inventor 2013 it hangs at the splash screen.
The only way to exit is to kill the Inventor process. Other applications with in the design suite run fine ACAD, Fusion etc.
I did read a post about a windows security update causing this, but I do not have the offending update loaded so it can't be this.
Windows 7 64 bit Dell Precision
View 9 Replies
View Related
Feb 24, 2013
I have a Alienware M17x with 8600 dual core processor (2.4 GHZ), 1G Nvidia 260M Graphic card, and 8G of RAM. These black outs in Autocad Architecture 2013 are random they just happen out of nowhere. Is it that I need a 2G graphic card instead of a 1G or what?
View 4 Replies
View Related
Nov 4, 2012
Is there a button/option which enables the drawing to fill the screen
View 3 Replies
View Related
Jun 6, 2013
We are launching Autocad 2014 in a multiuser environment and trying to determine how to stop the WELCOME screen from appearing.
The /nologo switch is for a different screen. Need per user or prefer per computer registry setting to turn off the Welcome Screen.
Thought it was InfoCenteron key,set to 0, but that was not it.
Thought it might be MC3 key, but not there either.
View 2 Replies
View Related
Jun 11, 2013
I have upgraded to 2014 and since then I get this annoiying thing that happens when I am moving selected objects/lines across the screen during a copy and move. It's not a computer perfomrance thing. I have two monitors and I have called up both 2014 and 2013 side by side. When O copy or move and drag across the screen everything is wonderful. No regen while dragging, I can see the lines/objects 100% solid while dragging. In 2014, as I'm dragging and can't see the objects/lines because it's trying to regeneratate (slowly) while I'm dragging.
I have checked all my setting in tools>options and they are identical to what I ahve in 2013.
View 9 Replies
View Related
Jul 8, 2013
When I use my layer control and the pop up opens to changes layer or add layer, it will not give me the "x" to close the screen. I am figuring out to close the screen.
View 2 Replies
View Related
Mar 8, 2013
ON 3 different computers in my classroom, the cursor quits working in the graphics screen. You c an still click on any of the toolbars, palettes etc, type on the keyboard, but there is no response in the graphics screen area. In fact the crosshairs change to the "windows" arrow when the cursor is in the graphics area. I have had to re-install the whole system. I thought maybe is was a graphics crad/ driver issue but this is only occuring in AutoCAD 2013, I have not have any trouble in Revit, or other graphics based software that we use. I have video cards/drivers that are certified by autodesk. I have checked them for updates, etc. I have tried turning of the anit-virse stuff, nothing works except re-installing the whole system. It is random, I have 30 computers and so far 3 of them have done this. They are all configured the same.
View 9 Replies
View Related
May 3, 2013
Editing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
View 9 Replies
View Related
Apr 23, 2013
Is there a way to position the Filetabs from the default location on the top of the graphic screen to the bottom where the sheet tabs are?
View 1 Replies
View Related
