AutoCAD 2013 :: Cursor Quits Working In Graphics Screen?
Mar 8, 2013
ON 3 different computers in my classroom, the cursor quits working in the graphics screen. Â You c an still click on any of the toolbars, palettes etc, type on the keyboard, but there is no response in the graphics screen area. Â In fact the crosshairs change to the "windows" arrow when the cursor is in the graphics area. Â I have had to re-install the whole system. Â I thought maybe is was a graphics crad/ driver issue but this is only occuring in AutoCAD 2013, I have not have any trouble in Revit, or other graphics based software that we use. Â I have video cards/drivers that are certified by autodesk. Â I have checked them for updates, etc. Â I have tried turning of the anit-virse stuff, nothing works except re-installing the whole system. Â It is random, I have 30 computers and so far 3 of them have done this. Â They are all configured the same.
View 9 Replies
ADVERTISEMENT
Jun 28, 2012
After an AutoCAD/Windows crash, I reboot. The system begins to load Windows (Win 7 splash), then the screen goes blank and a white Windows cursor appears -- nothing more; no desktop or taskbar.
Control-Alt-Del does nothing, however, the HDD light continues to flash as if it is continuing to boot. The same thing happens when I boot in Safe Mode (except cursor is larger due to different resolution).
I can boot from bootable CD and everything works fine. HDD scan and memtest both pass. I formatted the drive and reinstalled Windows and AutoCAD and everything works fine. However, two days later, the same exact problem occurred on the second of five workstations.
Details:
Win 7 Professional 64bit
MS Office Home and Business (with Outlook configured for IMAP)
i7 processor, 6GB ECC RAM, Nvidia Quadro 600 w/1GB RAM.
AutoCAD 2013 was originally loaded from a trial version, then purchased license key installed.We are using Xref on a file server and opening drawing on a file server across a ethernet Gbit lan.
View 3 Replies
View Related
Nov 5, 2013
When I try to start Inventor is attempts to open and shows up in the active processes list for a few seconds.
Sometimes it will quit before the splash screen appears and sometimes a split second after it appears. No error messages or computer lag, it just simply quits. I'll list the steps I've taken so far. (Windows 7 64 bit)
Deleted the Cascadeinfo.cas file
I've had an error when my 3d connexion mouse trys to start so I uninstalled the drivers.
IT guy could open Inventor from his login on my computer but still not with mine.
Deleted Autodesk folder in the AppData folder and deleted the Cascadeinfo.cas again.
Did a "Repair" of Inventor.
Did a "Re-Install" of Inventor.
Nothing has worked yet and the only advice I'm finding is in regards to deleting the Cascadeinfo.cas file.
My thoughts are that the key to this problem is the fact that it works for other users on this machine. I just don't know what it is or how to fix it.
View 4 Replies
View Related
Nov 29, 2012
We are in the process of upgrading from AutoCAD 2010 to 2013. The print screen key on the keyboard will not work in the 2013 version (using Snagit to capture the screen image). Changing the hot key (in Snagit) works but I'm trying to keep the same workflow for my 300 plus Users.
View 2 Replies
View Related
Dec 6, 2012
I have a new computer with Windows 7 - 64 bit and have dowloaded both updates to now have X6.2 - When I try to use ANY "text" the program quits working
View 14 Replies
View Related
Apr 11, 2009
where my hue/saturation filter just quits working. I use that filter religiously so it has to be fixed each time it occurs. I've only had the Adobe CS3 for 3 months and I've had to resolve this 3 times now. Each time this has happend I've had to uninstall the entire CS3 design package and do a complete reinstall which takes almost 4 hours because my download uses the Adobe server. My product download was purchased online so I do not have a disk but rather files that I downloaded from Adobe with product serial numbers. I've used Adobe for years, as far back as Adobe 5, and never had such a problem! I've checked in my preferences and have ample RAM available for the settings. I use Dell inspirion and have 2 GB of RAM total on my system.
View 5 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4)Â you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Jan 21, 2014
When I try to create a sequence the program stops working and force quits, I have a school project due!!!
View 2 Replies
View Related
Oct 3, 2012
it slows me down to have to wait for the line to catch up with the dimensions showing up with a draw a simple line ,etc. IM sure its a simple options I accidentally selected.
View 3 Replies
View Related
Aug 2, 2010
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
View 10 Replies
View Related
Jul 18, 2012
Apparently the issue has been happening since as far back as CS2. The flashing text cursor is only visible in the upper left hand portion of the screen. If the text your are attempting to edit is on the far right or bottom of the screen, the cursor vanishes. Some people have suggested zooming in and out, but this only appears to solve the problem because the art board may get nudged into the "good" portion of the screen. I did a screen shot and found that the cursor is only visible in about a 930p x 600p area of the window (not including toolbars). Incindentally, the is the same size that the window defaults to when initially opened. On a HD monitor, this amounts to a very small space.
View 9 Replies
View Related
Jan 12, 2013
This is a incosistent problem, in which I cannot determine why it's happening and it doesn't happen all the time. I often restart Lightroom and it is ok after that.
Â
In a small area of the screen the curser doesn't function. I cannot select an image or anything in that area while in the library module and when in the develop module brushes change back to the arrow icon and don't allow me to click in that area.
Â
This is my first time using Lightroom and am currently using version 4.3 that I downloaded from the Mac App store. I am running a new MacBook Pro with OS 10.8.2 Mountain lion.
View 2 Replies
View Related
Jul 1, 2012
Why does dragging on a Touch Screen change the cursor into a Hand Tool? This did not happen in CS 5.5 and I could edit on my touch screen monitor. With Photoshop CS 6, as soon as I start to drag, the cursor changes to a hand cursor. I have look at all of the system options and nothing seems to affect it so I have to assume it is something wrong with Photoshop CS 6.
View 3 Replies
View Related
Mar 4, 2013
Software: ACAD LT 2010. Recently I upgraded to a new computer and Windows 7, from Win XP. Now ACAD is lagging and dragging. Also, sometime it takes forever to open a file.Â
Here are my new computer specs.
Dell Precision T3600,MT,425W
Four Core XEON E5-1607, 3.0GHz, 10M, Dell Precision T3600
View 9 Replies
View Related
Mar 13, 2013
This has been occurring numerous time more than it should. While in a drawing mid command, panning, typing anything pretty much my cad freezes. The rest of my computer is fine everything works properly but CAD is frozen and when i bring my pointer into the program it disappears. I can even open cad up again and the old CAD will stay open. It shows the drawings i have open on the tab bar and i can’t close out of them. I have a computer that’s more than capable to work properly.
View 1 Replies
View Related
Jan 16, 2013
So I was working in 3D and I guess I pressed some kind of button or something that caused my 3D cursor to only move along the x=0 line. If I move my cursor up, it moves it lightly sideways. It stops when I move into side/top/front views, but as soon as I pan into 3D view, the cursor only appears along the x-axis. I'm probably overlooking a simple AutoCAD command, but I'm a new user and I can't find the answer anywhere in the manual or on the internet.
View 1 Replies
View Related
Dec 3, 2012
Everything works fine until the center of my cursor passes over a 3d solid, the cursor then disappears, the spinning circle icon spins for sometimes minutes, and the display greys over, and I cannot click 'ESC' or Ctrl + C to abort this cycling. I have to wait, sometimes 30 secs, sometimes 2 minutes for it to stop freezing and the screen returns to normal.Â
As I work in 3d solids a lot, this makes Acad 2013 unusable to me. Acad 2007 was not an issue with this problem I still have it installed as I have to revert back to 2007 to do anything with 3d solids in it.
View 4 Replies
View Related
Jun 19, 2013
I am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies
View Related
Sep 20, 2013
I noticed that when I hover the mouse over a object, two small blue squares appear and when I pick an object, a properties dialog box appears. This started happening suddenly without changing any settings or options. How do I turn this off/on?
View 2 Replies
View Related
Aug 11, 2013
I have problems withe the cursor: it is a cros. I try in preferences to set it to another, or a standard cursor. I then close and restart te CS6. No way to get a normal cursor.
I installed the CS6 a few days ago and this problem is there sinds then.hkank you for an answer,
View 2 Replies
View Related
Sep 11, 2012
recently I've upgrade to Photoshop CS6.All works great, but Liquify filter. Well, filter works great (new mercury engine is awesome!) but something happened to cursor.Look screenshot below.
Â
Using PS CS5 I have not problem checking "Use GPU" option in Preferences panel; and with it checked PS CS6 works great, except Liquify cursor. If I uncheck this option, Liquify cursor looks normal.
iMac 27"
Mac OS X 10.6.8
ATI Radeon HD 5670
Â
BTW I've updated to 13.0.1 and nothing change.
View 35 Replies
View Related
Aug 20, 2012
In Autocad 2012 the white cursor automatically toggles to black when moved onto the white background of paperspace. This does not occur in 2013. Imported the sysvaribles from 2012 into 2013. Cursor still does not toggle.
View 5 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Jun 18, 2013
Since installing 2013, when I have objects selected and want to deselect them by depressing the shift key, the cursor freezes and will not move until i let go of the shift key...
View 9 Replies
View Related
Feb 22, 2012
when i make my brush size very small (to the point that its only like 4pixels dot on the screen), a crosshair symbol automatically appears around it which makes it hard to see the cursor's surroundings when working on small details without zooming in alot (which would make a 4px cursor appear bigger thus losing the crosshair again). I guess this feature is there for people that might have trouble locating small cursors, but on a large tablet that allows very fast work without having to zoom in much, this makes things harder. Is there a way to disable this or modify some files or "hack" the cursor icons somehow and delete it?
Â
(Tried all possible combinations of the PS prefferences but none of it seemed to be related to the cursor becoming a crosshair once the brush size gets very small relative to screenresolution)
View 1 Replies
View Related
Feb 29, 2012
Working away in ps cs5 and click on the direct selection tool and all I get is the hand (move) tool and what ever tool I click on I just get the hand tool! This happened in indesign too.
It goes back to normal if I reboot and just found that when i opened illustrator while having this prob in ps and then went back to photoshop the problem rectified.
View 8 Replies
View Related
Mar 5, 2013
Is there a way to change the cursor color in the command line in AutoCAD 2013?
When I change the background (active command) to black, the cursor blends into it and not visible. Can’t see where is my current position when editing coordinates. The command background was black and text white for the last 10 years for 20 drafters; we would like to keep it this wayÂ
View 8 Replies
View Related
Feb 28, 2013
I admit that I have used AutoCAD for several years now, but I have very, very little experience with 3D applications and needing to alter the typical horizontal/vertical coordinate system.
What I have is a file that, though the lower-left icon is horiz/vert, my crosshairs cursor is tilted approximately 30 degrees counterclockwise. This file, I believe, did originate in AutoCAD Civil 3D, so who knows what was done there. But, how can I get my crosshairs straightened out once more?
I have noticed a relation with the UCS and the cursor, when I've played with Orbits. I just can't grasp what that relationship is.Â
View 9 Replies
View Related
Dec 19, 2013
Whenever i move my cursor over a 3D solid, outlines of the solid stay dashed.I tried changing the visual effect settings but it doesn't work.
it doesn't only do this in every view (top,side,front) but also when i'm panning around and hover my mouse over any solid. Using the regen command resets the solids so that they don't have the dashed outlines anymore.
whenever i'm panning around and i have conceptual view on, i have to switch from conceptual -> wireframe -> conceptual if i want the solids to look normal again.
View 4 Replies
View Related
Aug 17, 2013
I'm having trouble finding a system variable.
I have blocks in a drawing that were made using the 'retain' method. WHen I go to insert the block I cannot see the block preview at the crosshair cursor. The block only becomes visible once I have clicked the left mouse key at the insertion point.
This means I can't rotate it either as I can't see it until I have clicked to place it.
Which system variable (And what setting) will allow me to see the block as I'm inserting it?
View 9 Replies
View Related
Apr 17, 2013
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
View 9 Replies
View Related
