AutoCAD 2013 :: Lines And Object Regenerate While Moving Them Across Screen
Jun 11, 2013
I have upgraded to 2014 and since then I get this annoiying thing that happens when I am moving selected objects/lines across the screen during a copy and move. It's not a computer perfomrance thing. I have two monitors and I have called up both 2014 and 2013 side by side. When O copy or move and drag across the screen everything is wonderful. No regen while dragging, I can see the lines/objects 100% solid while dragging. In 2014, as I'm dragging and can't see the objects/lines because it's trying to regeneratate (slowly) while I'm dragging.
I have checked all my setting in tools>options and they are identical to what I ahve in 2013.
View 9 Replies
ADVERTISEMENT
Apr 23, 2013
I have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies
View Related
Aug 19, 2012
how to have a video playing & have a object on screen playing a video inside of it & the object moving around the screen? For example if I put a video into a picture frame I can the render as a file & use that as my object, but if I then want to move this on the screen say up/down/left /right tilt etc how can I do this? I've been looking & looking but the more I look the less I see.
View 1 Replies
View Related
Jul 14, 2012
When I move objects across layers, the the screen "jumps" or "jitters". Could this be related to the refresh rate? Maybe it is my monitor?
View 1 Replies
View Related
May 14, 2012
i found the problem of dimension when moving the whole object inclusive the dimension to any direction.
View 2 Replies
View Related
Oct 25, 2012
when you draw on a black background with white, it comes out black ink on white paper.
is there any way to automatically adjust the contrast of lines with the screen background?
so if i have a dark grey bacground and use a lighter grey line, it is still distiinctive on the white paper?
View 6 Replies
View Related
Nov 20, 2013
Is it possible for the same object to be in hidden lines in 1 viewport and continuous in another?
View 6 Replies
View Related
Mar 25, 2013
Just upgraded to REVIT 2013 and now many types of lines are not visible on screen- randomly it seems. Also, sometimes they don't print, either. I've tried increasing the fineness of the view, changing the material definitions, etc. Most often this is happenning when I have opened an old file and had it automatically update the file. Also, it seems to happen within asurface texture, but it is not limited to that circumstance.
View 1 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Apr 27, 2013
How do i stop the screen from moving when I drag something to the edge of the screen?
View 1 Replies
View Related
Jan 22, 2013
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies
View Related
Oct 16, 2013
In Autocad MEP i can regenerate the catalogs with something like:
CatalogManager catalog = new CatalogManager();catalog.RegenerateCatalog(Domain.Multi-ViewPartComponent, true):
but this will regenerate every catalog that i have loaded for the multi-view part domain. How can i regenerate a single catalog like the bubble popup does when Autocad MEP detects a catalog change?
Using the link will only regenerate the specified catalog and not all catalogs. I would like to perform the same with code.
View 3 Replies
View Related
Oct 10, 2012
With the iAssembly I created I now have a message when I open the drawing informing me that i need to regenerate the factory. This terminology is new to me and I have not been able to accomplish this task. I have opened the assembly, selected manage, and updated the assembly with each of the iAssemblies active.
View 3 Replies
View Related
Sep 11, 2013
I had a computer crash and once it booted back up I can no longer delete any selected line using the delete key on the keyboard. Also if I select a line and use the move command it wants me to re select the line to move it.
View 2 Replies
View Related
Oct 15, 2010
The screen flickers when I move the mouse around an open drawing. I just applied the latest patch to Civil 3D 2010. It was not doing this before the patch.
Have Quadro 3500 video card. Updated the driver for that with no change.
Have a Logitech wireless mouse, M310. Up dated the driver for that with effect.
Changed to a wired mouse, no change.
Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?
View 6 Replies
View Related
Jan 6, 2012
Why does my system regenerate after selecting multileaders for aligning? To regen it zooms to extents
View 1 Replies
View Related
Aug 15, 2007
Every time I save my drawing or it does an Autosave I get the message "Regenerating model" and have to wait 30 seconds for everything to regenerate. There is no reason it needs to do this, is there some way I can turn it off?
View 7 Replies
View Related
Oct 23, 2013
So here's an odd one (at least I think it's odd ): I have a drawing that it utilizing feature lines which are projected to the cross sections to display R.O.W., easements, etc. However, every now and then (there doesn't appear to be any similar operation that causes this) the feature lines will change their location, in this case they typically seem to move north and east about 200'. I can't deuplicate the problem...it just seems to happen on its own.
I'm running Civil 3D 2013 with SP 2.
View 5 Replies
View Related
Apr 16, 2013
I am having a problem with moving a line that is attached at a corner to another, as it moves that line as if I clicked on the intersecting snap point at the end of both lines and dragged it. I want to move or copy the line away, but it somehow is attached to the other, and is quite annoying and impossible to work with without deleting and redrawing lines. I've tried exploding them, but they are not joined in that way, and are not "grouped" (I don't think, because when I did "group" them, it made a box around them and highlighted both lines at the same time). A symbol shows that is two boxes, one an outline and the other solid which is up and to the right. I can't figure out what mode it is in to turn it off!
View 3 Replies
View Related
Mar 21, 2013
When I draw a new line from end point to end point using osnap, and then want to move that new line I drew, it also moves the lines I onsapped to.
View 1 Replies
View Related
Sep 7, 2013
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies
View Related
Jul 21, 2013
I amrying to create embedding of a text entered through dialog box. The sketch regenerates fine but the Emboss doesn't. Cannot figure it out, tried a lot of different approaches...the text has to be configured this way - need to control it's height.
View 2 Replies
View Related
Oct 2, 2012
I'm using Mechanical 2010. I keep my "Properties" window docked on the right side of my screen. I've run like this for several years, but recently when I click on an entity, it takes a few seconds to regenerate the window..
I running XP on a 16 bit machine with 4 gig of ram.
View 3 Replies
View Related
Oct 4, 2012
I have recently started to have a problem with lines, leaders, blocks and x-refs etc, straying from level 0 for z. I think it may have something to do with the fact I am making use of files from cad duct 3d software, how do I prevent/resolve this?
View 3 Replies
View Related
Jul 7, 2013
Inventor does not think an update is required for iAssembly members after changes to attributes on a client feature are saved. In our workflow we avoid rebuild all because it causes subassemblies to change, so we force an update by changing a parameter. Through the API is there a good way to indicate that our change was significant enough for members to need updating?
View 4 Replies
View Related
Apr 3, 2013
Autocad LT Mac
How do i copy and move objects from one layer to another?
I have been copying the objects to a new location in the old layer, then move the objects to the new layer, then move the objects back to the original location in the old layer, but this is obviouly an ad hoc solution.
View 9 Replies
View Related
Nov 4, 2011
I have some "insert" constraints for DIN rails in holes. I've moved the holes, but the DIN rail doesn't move. The refresh button isn't "lighting up", or when it does, it does not do anything to move the rail. Is there something that's been "shut off" to keep things from moving?
View 7 Replies
View Related
Aug 8, 2013
Canvas is always align center of screen. is it possible to move where i want? I need right side windows that size. but it's blocking my canvas.
View 1 Replies
View Related
Feb 1, 2012
I have a newly discovered issue with left clicking and moving lines and points in 2D-sketch.
After working in Inventor for a while I cant move lines and points(green and unconstrained geometry). If I exit 2D sketch mode and enter again I can move a line once and then its back to not being able to manipulate the geometry at all, the curser just want to create a marking box.
I have a new optical mouse with cord, its a Logitech G400. I have switched mouse but with the same result.I have installed the latest driver for the mouse.
View 3 Replies
View Related
Dec 20, 2011
I have a 2D plan and a 3D plan. The data is essentially the same on both, the only difference being that the 2D plan has several hundred points on it (all at elevation/z coordinate of 0, of which can easily be copied to the 3D plan).
I want to move those 2D points to their respective 3D positions. I.e. if point X is at coordinates 15213.321, 51646.632, 0 I would like to search in the Z direction above (or below; although in this data set it would always be above) for any object (line, polyline, 3dpolyline or an arc only I think) that crosses or is on this coordinate and then move the point (or place a new point) to that z coordinate. So if there is a line whose z value is 895.265 at coordinate 15213.321, 51646.632, then the point (that was originally 2D) would become 15213.321, 51646.632, 895.265.
Any lisp or other method in AutoCad that could accomplish this (ideally without having to select each point individually)? Surely this must have come up a few times before although I'm not too sure what search words to be using to look for info.
View 5 Replies
View Related
Jan 17, 2013
I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.
Here is how it is setup and what I have tried
The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.
The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.
The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch
Lines merge is on and needs to be on.
I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.
I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.
View 5 Replies
View Related
