I have recently started to have a problem with lines, leaders, blocks and x-refs etc, straying from level 0 for z. I think it may have something to do with the fact I am making use of files from cad duct 3d software, how do I prevent/resolve this?
View 3 RepliesI created a dynamic block that contains a quick leader. The problem I have is when I go to my layout views the leader in the block does not show up. If I edit the block, change the layer of the leader and save it then the leader will show up in viewports. Other parts of the block are on the same layer and show up, it is just the leader for some reason.
View 7 Replies View RelatedWhen I draw new linework and text it shows up greyed out, even though it should be showing up full tone. Curiously, blocks that are inserted on the same layer as the linework and text come in full tone.
The attached image provides an example of what's happening (it's difficult to see the greyed out text reading "TEST", the leader, and a sawtooth section of polyline).
More info:
Xrefed drawings are displayed at full tone.
Linework from earlier sessions are displayed at full tone - this is only affecting new work.
This happens only in this drawing.
This happens on different sessions of C3D (i.e. different computers).
This happens on when drawing on any layer.
The layers are unlocked.
This occurs in both model and paperspace. The drawing has been audited (no errors were found). Everything prints out properly.
I suspect there's a variable that deals with visibility has been inadverdantly changed in this particular drawing.
C3D 2013
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedIs there a way to turn off blocks in an xref? Example.I would like to xref a lighting plan, however the "Exit Sign" blocks are to large and cover up the sprinklers, tees, and piping in my fire protection plan. Additionally the “Exit Sign” blocks have been inserted on the same layer as the "lighting" blocks which are very important in laying out sprinkler heads so I don’t place a sprinkler in a light.
I know of ways to fix this problem by editing the electrical drawing but it might cause more problems for the electrical draftsman. Any way to turn off these blocks?
I have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
Just wondering how I would return attributes of blocks in my drawing's XRefs?
I've come across one example that is in VB but no luck.
I currently have a list in a form that consists of all the XRefs in my drawing and I wish to return all blocks and attributes that are linked to the selected XRef.
I'm a document controller that is trying to ID the situation with 2600 drawings. Some files are so large - 250,000kb, they won't open. They have bound xref's in them. We want to ask the contractor to unbind them and attach them as normal xref's. I need to view if a drawing has bound xref's. I just want to see them as BLOCKS which I now understand they are. How do I do view the blocks that were once xref's?
View 9 Replies View RelatedI'm using Autocad 2010, and have never had this problem before. Working in plan, the traced linework over 2 xref pdfs (both on locked layers) keeps moving in model space either when I'm performing another command on different linework or when I regen. The layers that keep moving are all locked, and do the same when they're frozen. There is no consistency to where they move--usually within the same screen view--so it makes me wonder whether I xrefed these files into a different plane? They're not georeferenced though.
Or is this just a bug? I thought the file may be corrupted so started a new one, still same issue.
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
View 1 Replies View RelatedI have a drawing with one viewport. In model space I have attached a jpg. If I draw a line over the xref in model space, it looks fine. When I switch to paper space, the line does not show, but if I plot to a pdf, it does. If I draw on paperspace, above the viewport, the line does not show.
The jpg is black lines on a white background. If I draw a line across it in model space, it shows up as the correct color (in this case it's red) but when I switch to paperspace it turns white and is invisible over the image.
I tried to change the display order, but no win. I checked the properties of the line and the xref itself and it all looks good. Everything is set "by layer".
We are having a problem with blocks not appearing after xreferencing a drawing. We can place blocks as normal from the tool palette, but as soon as we xreference a 2D site plan and select blocks from the tool palette, they will not place. You can see them when placing, but once you click to place it, the block does not appear. I have copied out the site plan to a new dwg file, still does the same thing. Everything has been purged and ran an audit in the plan drawing and also the site plan drawing. The block does not show up in the block editor either. I am trying to avoid redrawing the site plan like we had done with two models that were doing the same thing. Remodeling a vessel and rebuilding a skid composite corrected the problem with two other drawings, but redrawing this site plan would take considerable time.
View 9 Replies View RelatedI'm having a senior moment. When you substitute one xref with another, the reference retains the name of the original xref. However, there's a simple trick to update that reference to the new name - but I've forgotten it.
View 3 Replies View RelatedI have several .dwg files which I attach using XREF so that I can ensure I have the latest versions combined.
The problem is that the line types do not show up correctly. After looking up on google I have found that this is a problem due to it being a 3d model rather than it being flat.
I managed to half solve the issue by inserting each drawing into one, then exploding the whole image. Then changing the scale in the bottom right to around 1:200 to make the line types visible.
My problem is this ends up being a lot of work as the separate drawings can be updated daily. Is it possible to have all the drawings Xref'd in and to be able to have the scale changed to be able to read the line types? I tried to save the XREF setup as a template, then just bind all the drawings into one, explode and change the scale. But for some reason this doesnt work for me. I end up with just solid lines, rather than line types. I don't the drawings are made up of several lines, all of different length. (This I have been told is why the scales do not appear correctly)
I have been shown one method to work around this, which is to open the Xref drawings, explode them, then take each section of line and manually change each scale to the biggest that shows up.
I have multiple copies of a block, and when I move one copy to a layer, it doesn't seem to actually move.
For example, if I have 2 copies of block A, and move one copy from layer "Inside" to layer "Outside", then hide layer "Outside", the block I just moved doesn't hide, but everything else on layer "Outside" does hide.
When I inspect the moved block, the properties say it's on layer "Outside". What is going on?
I am working on a project with multiple levels, and multiple xrefs. Problem I m having is that I keep getting these lines, or what looks like possibly a footprint of something? So I go into the xref to turn the layer off, but the lines are nowhere to be found in the xref drawing!? I have been through all the basics like turning all the layers on and off etc... I will attach an image showing the lines.
View 4 Replies View RelatedThe 2D drawings I am working with were exported from 3D REVIT files to 2D AutoCAD files. There are several XREFed drawings that are both mechanical and architectural from the original REVIT files that for whatever reason, the block's line weights came over with line weights of 70 in those blocks.
When I plot, the objects are a blur with the line weight so high. I tried using the command "setbylayer" but that didn't work since nested blocks still had lineweights of 70. Is there a VBA or LISP routine to run through all the blocks (including nested) that can change the line weights to a given number?
I have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
I have a drawing that has a xref drawing inserted in it, that has lines still printing when they turned off off in the xref drawing, now I have got around this by selecting not to print in the xref drawing layer manager, but I do not understand why they are still printing if they are turned off ?
View 2 Replies View Relatedin one of my XREF files, a lot of lines of which i believe are the outlines for the blocks, suddenly appear in my drawing. The funny thing is when i open the xref, the file dissapears.
here's the link for the files:
[URL]
I have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
I just have a quick question (hopefully) about an activity I want a Dynamic block to perform.
I have a simple electric switch block (a line with an S over it), that in some cases is enclosed by a simple rectangle. When the switch is enclosed, I'd like the attribute to move further, to keep the spacing the same.
Is there a way to make the attribute move automatically with the display of the rectangle, maybe through some combination of Linear Move parameters, Visibility parameters, and a formula?
I took the time to search and was unable to find anything that seemed relevant. I have also had trouble figuring out the documentation.
Is there a way to select a specific grip within a dynamic block and then update its position?
My company just upgraded to 2013 from 2012, and we are having problems copying and moving dynamic blocks. As we try to re-insert the object(s) after using the copy or move command, they disappear from the screen. If we save the drawing and restart AutoCAD, the objects are there where we inserted them, but we cannot figure out how to make the objects reappear without restarting the program (Undo does not work).
The objects in question are dynamic blocks created with AutoCAD Civil3D 2012. We suspect this might have something to do with conflicts between the two different versions of AutoCAD but we're not sure. There are 5 or 6 of us who have this problem.
Currently, I have the base or insertion point of some of my blocks in an undesirable spot and I would like to move it. When I insert a drawing or block I have difficulty in placement due to a poor choice in the drawing or block I am trying to insert.
View 6 Replies View RelatedSo, I am working off a site drawing of an 80,000 sq ft production plant that was drawn by some old school drafters using probably AC 14. Most of the departments are drawn in xrefs. However, probably 10+ people worked on this project of mapping the plant so nothing is the same. I cannot describe the frustration of inconsistencies of this drawing. Alas, my question: some of my xrefs are shown in literal dim lines, what is going on? When you go to the original xref, the lines are as bright as they always are. When the xref is in the main drawing, the lines are dimmer than everything else.
View 2 Replies View RelatedI make parcels in a base dwg and make separate layers for each parcel and labels moving them off the default layer zero.
i xref the base and then try freezing all the parcel layers and the go away but i am left with a copy of the parcel lines on xref layer zero with no control over it.
I need to snap to some feature lines in my corridor, i.e. Back_Curb, Flowline_Gutter, etc, and I have the drawing containing the corridor I need to snap to as an XREF. I can snap to other objects in the XREF, but not the Corridor Feature Lines themselves. Apparently, after some digging, Autocadd hasn't come up with a solution for this problem, and many others have the same issue. I run C3D 2012, updated.
View 4 Replies View RelatedThe linear stretch works fine but changing the length affects the position of the tick marks of the polar stretch. If I change the degrees to 0-360 then it's not a problem but I want to restrict to 285-345 deg.
I can't figure out how to move the base angle of the polar stretch with the linear stretch.
In "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
I had a computer crash and once it booted back up I can no longer delete any selected line using the delete key on the keyboard. Also if I select a line and use the move command it wants me to re select the line to move it.
View 2 Replies View Related