how to have a video playing & have a object on screen playing a video inside of it & the object moving around the screen? For example if I put a video into a picture frame I can the render as a file & use that as my object, but if I then want to move this on the screen say up/down/left /right tilt etc how can I do this? I've been looking & looking but the more I look the less I see.
View 1 RepliesWhen I move objects across layers, the the screen "jumps" or "jitters". Could this be related to the refresh rate? Maybe it is my monitor?
View 1 Replies View RelatedI have upgraded to 2014 and since then I get this annoiying thing that happens when I am moving selected objects/lines across the screen during a copy and move. It's not a computer perfomrance thing. I have two monitors and I have called up both 2014 and 2013 side by side. When O copy or move and drag across the screen everything is wonderful. No regen while dragging, I can see the lines/objects 100% solid while dragging. In 2014, as I'm dragging and can't see the objects/lines because it's trying to regeneratate (slowly) while I'm dragging.
I have checked all my setting in tools>options and they are identical to what I ahve in 2013.
I want to create a highlight around a player; I think I can use track motion (Pro X6) to follow the player, but is there a way to highlight a small area around him? See an example in the video linked below (not my video) at the 0:24 mark. URL....
View 6 Replies View RelatedIs it possible to attach an identify marker or title to a moving object in Video Studio X4 PRO. I video trains. As the train comes toward me in the video I would like to attach the number of the diesel and type to it and each unit behind it ,if there are any. As it comes closer the marker gets bigger and more readable then, as the diesel disappears from view it's marker goes with it and the next one does the same thing, then the next.
For example, during NASCAR races an identifying marker, showing the drivers name and car number, is applied on screen and stay "attached" to the car as it travels through traffic around the raceway until it's turned off.
I don't know if it will look good or not but I would like to try it. Is that possible or have I gone way beyond VS x4 pro's capability?
How to lock an picture (png, for example) to a moving object in Corel VideoStudio X5? maybe i might use some plugins? i know that in some video editing software this option exist and simply to use. is it real in videostudio x5?
View 2 Replies View RelatedI'm trying to get text to scroll across the screen full height coming from the right to left, scroll across the screen at certain times of the video. I saw some animation presets there for text but not what I'm looking for. What I'm trying to do: along with a song, every time the name of the song comes up in the chorus, I'd like to scroll those words across the full height of the video as an overlay. And if it was just a graphic instead of text going across, what would I use to achieve that?
View 5 Replies View RelatedHow do i stop the screen from moving when I drag something to the edge of the screen?
View 1 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedCanvas is always align center of screen. is it possible to move where i want? I need right side windows that size. but it's blocking my canvas.
View 1 Replies View RelatedI have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies View RelatedWhen I am editing a picture in Photoshop, I use a lot of keyboard shortcuts for curves, hue/saturation, etc. but I get frustrated that the box shows up right in the middle of the screen, over the picture I am trying to edit. This makes me have to move it out of the way with the mouse to see what the changes will look like. Is there a way to have it default it popping up to a corner of the screen or even a way to move it without having to grab the mouse?. It is my #1 Photoshop frustration and I figure there is a way that I just can't seem to find it.
View 2 Replies View RelatedThe smaller windows that come up such as those for adjusting the levels, brightness/contrast, etc. moved little by little each time I used them, but I never paid attention until my Levels window moved so far up when it opens to its default location that I can't get to the top of it to move it anywhere. This has happened to a couple other windows for me, and I can't figure out how to fix it! I tried resetting the workspace, changing resolutions back and forth, restarting.
View 4 Replies View RelatedI bought a new iMAC, a 21.5", 2.7 GHz one with 12 GBytes RAM. My intuos 4, when using Photoshop CS6, works on and off. I mean, when I am painting with the finger tool for instance, and more often than not, I try to make the strokes but the damn finger brush cursor won't move on the screen until a couple of seconds had passed.
In other words, there's a very annoying delay between the physical stroke on the tablet and the brush moving on the screen, it's not simultaneous as it ought to be. And I have installed the latest driver of Wacom for this model!!! This never happened before with the older iMAC, 2.4 GHz and 4 GBytes RAM. I mean, it should work even better.
The screen flickers when I move the mouse around an open drawing. I just applied the latest patch to Civil 3D 2010. It was not doing this before the patch.
Have Quadro 3500 video card. Updated the driver for that with no change.
Have a Logitech wireless mouse, M310. Up dated the driver for that with effect.
Changed to a wired mouse, no change.
Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?
I managed to move the home screen on my Mac to the left but now it will not return to centre, so that I can access the controls. A two fingered drag does not seem to work.
View 2 Replies View RelatedI want to move an object from one psd to another psd in such a way that the object should appear on the same position in the target file.
Just dragging the object is not working for that.
I am trying to make a ball look like it is in motion as it is thrown across a room.
I know I can blur the ball but I was thinking more of trying to show a series of the ball in flight.
I've imported a short (2 second) video into PS as layers together with a still of the same scene. I want to create a mask for a flower which is moving. Do I need to mask each individual frame or is there an easier way of achieving this? I can't just create a big mask round the flower and it surrounding area as the colors won't match in both versions.
View 1 Replies View RelatedFor some reason Corel will not let me select an object and move it with my mouse, I can only move an object with arrow keys.
View 4 Replies View RelatedAutocad LT Mac
How do i copy and move objects from one layer to another?
I have been copying the objects to a new location in the old layer, then move the objects to the new layer, then move the objects back to the original location in the old layer, but this is obviouly an ad hoc solution.
I want to prevent an object to be moved on first click even if select and move tool is active. It is tiring to always press Q key or toggle select object tool, cuz after some transactions are applied, it automatically activates move tool. I want to move tool to act for first click to just select and second click and afterwards to move.
View 1 Replies View RelatedI need to blur a moving object:
- The effect is only needed at some point of the video, it must appear, and then disappear, not being on screen the whole time.
- The object is moving, and changing shape, the blur must adapt to it.
- I've been trying to use the "Track Motion" option with Position & Rotation, then the "Analyze Forward" button, but the thing makes a mess all over, it's not following the object at all, then if You try to adjust it manually, it's only done in 1 frame, in the other frames the thing is off the object, then the "Tracking" stays on screen.
The problem in Coreldraw x6 is that when I move an object placed on a box powerclips, the movement is very slow and not fluid. There should be some option to avoid this problem. In Corel x4 this defect was not present.
View 5 Replies View RelatedI have some "insert" constraints for DIN rails in holes. I've moved the holes, but the DIN rail doesn't move. The refresh button isn't "lighting up", or when it does, it does not do anything to move the rail. Is there something that's been "shut off" to keep things from moving?
View 7 Replies View RelatedI am trying to use it to do something for school. I imported a 3d object from a dwg file and there is a channel that curves along it cut into that. I want to move a cylinder in this channel. I cannot seem to find anything that will allow me to make a spline that mirrors the edge of the object or to constrain the cylinder to the object.
View 1 Replies View RelatedCan you move an object while using another object's snap points?
View 4 Replies View RelatedIs it possible to move a wall to a different object style?
Im currently setting out a toilet suite and would like to place the cubicle partitions in a more appropriate object style.
Is there any way to move a object using its width? ex: "move to left a box with 10cm(width) using this value (10cm)". But I want to capture the width of any selected object.
Another thing: i want to select objects with same fillcolor and do something like: pathfinder>>add;
we have a problem with Illustrator.Illustrator pulls behind selection. You can't select an object with the Selection tool, without afterwards draw the object by moving the mouse. A new installation and resetting Illustrator was unsuccessful.
View 16 Replies View Relatedwhereby I can draw an arrow on a clip within AE CC and have the point of the arrow locked to a person head as they move along i.e. I wish to 'point out' an individual in marathon. This will be transferred back into PremPro for further editing.
View 4 Replies View Related