I want to prevent an object to be moved on first click even if select and move tool is active. It is tiring to always press Q key or toggle select object tool, cuz after some transactions are applied, it automatically activates move tool. I want to move tool to act for first click to just select and second click and afterwards to move.
View 1 RepliesWhen I am using clone stamp tool the object moves preventing me to use the tool. How can I prevent the object from moving?
View 1 Replies View RelatedSometimes when using crop tool, I'm strecthing the crop and then the image start moving up or down the screen? what is this? How do I keep the images frozen so it does not move around?
View 9 Replies View RelatedBefore I upgraded to AutoCAD 2014 (was using 2012) when I used the MOVE command on 3D geometry (while using the Realistic Visualization) I could see one object move into another. Like, moving a cylinder into a box to represent a button, and I would see it slowly sink into the box as I moved it further and further along.
In 2014, the object I am moving will REMAIN ON TOP visually of all other geometry until it is completely inside the other geometry (at which point it disappears completely). It's hard for me to then judge just how much of it is sticking out during the MOVE command. Once I complete the move command, the proper visualization order is then shown.
In other words, if I have a 10 inch cylinder, and I'm trying to move it into a box so only 2 inches sticks out (as a visual guesstimation), currently I would see ALL 10 inches of the cylinder whether part of it is inside the box or not, until I complete the MOVE command.
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
View 3 Replies View Relatedlisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View Relatedi have a couple of grouped dimensions. the second i click on them autocad crashes. i can work on everything else with no problem, but as soon as i click on that group it crashes immediately. is there like 'safe mode' or something i can get into so i can ungroup the dimensions and get things back to normal?
View 3 Replies View RelatedRight-click drag on an object is a neat way of quickly cloning an object.
If you do this on an object that is part of a group (by using CTRL click to select inside first) then you see the clone of the object as you drag it but it disappears the moment you let go of the mouse button.
I had the same problem with X5 - then went back to X4.Anyway to fix this problem in X6.
View 4 Replies View RelatedRecently updated from 2000 to LT2013. In 2000 I could Modify Text. So far I have found nothing that allows me to Modify Text."To Replace Existing Dimension Text With Alternate Text" it says to "Click Modify menu > Object >Text >Edit." The only Modify menu I can find is the Modify menu at the top showing 12 icons then it's drop down showing 14 more icons. There is no Object icon in that menu. how to Modify Text in LT2013.
View 9 Replies View RelatedI am developing a .NET application that integrates with AutoCAD Architecture. In my .NET application, I provide my user with a list of drawing files (.dwg) that they can choose to open. Once my user has selected a file, my application will open the selected drawing in AutoCAD Architecture. In this drawing, the user can click on an object in the drawing.
Can this mouse click event be captured and the object ID for the selected object be returned to my application?
I want to move an object from one psd to another psd in such a way that the object should appear on the same position in the target file.
Just dragging the object is not working for that.
I am trying to make a ball look like it is in motion as it is thrown across a room.
I know I can blur the ball but I was thinking more of trying to show a series of the ball in flight.
If I select some objects (i.e. pipe, feature line, etc.) and right click to bring up my shortcuts, I click on SOME commands (i.e. object viewer, elevation editor, etc....respectively, the command does not progress....it forces me back to a selection box cursor and I have to reselect the object.
For example, I select a pipe, I then right click, shortcut menu pops up, I select "object viewer", and then my previous slection is not granted and it asked for a new selection (it used to always just proceed with the command), I then have to select the pipe I had previously seleted, and the command proceeds as normal.
not a bid deal, but it slowing down my productivity having to select these items twice. The wierd thing is that it is not like this with all of my right click short cut commands...only a few!?
I don't have any particular speed issue with illustrator CS6 in general. However there is a massive speed problem when I'm trying to select on object on the artboard with a single click.
When selecting a object by creating a "rectangle" over the object it works fine and normal speed. When clicking the object to select it, nothing happens for about 3/4 seconds, then the loading little rainbow circle appears and loads for another 3/4 seconds...
Every time I right click on an Object in Elements window Animate crashes on me.
Same thing happens, when i click on the "Open Actions" Button - "{ }"
I am able to accomplish nothing this way.
I am running on a 2010 MacBook Pro 3.06 GHz Core 2 Duo - OSX 10.9
Adobe Edge CC downloaded today via Creative Cloud
How can we enable object selection on "Ctrl + Click" in CorelDraw X3
View 6 Replies View RelatedI've imported a short (2 second) video into PS as layers together with a still of the same scene. I want to create a mask for a flower which is moving. Do I need to mask each individual frame or is there an easier way of achieving this? I can't just create a big mask round the flower and it surrounding area as the colors won't match in both versions.
View 1 Replies View RelatedFor some reason Corel will not let me select an object and move it with my mouse, I can only move an object with arrow keys.
View 4 Replies View RelatedI want to create a highlight around a player; I think I can use track motion (Pro X6) to follow the player, but is there a way to highlight a small area around him? See an example in the video linked below (not my video) at the 0:24 mark. URL....
View 6 Replies View Relatedhow to have a video playing & have a object on screen playing a video inside of it & the object moving around the screen? For example if I put a video into a picture frame I can the render as a file & use that as my object, but if I then want to move this on the screen say up/down/left /right tilt etc how can I do this? I've been looking & looking but the more I look the less I see.
View 1 Replies View RelatedAutocad LT Mac
How do i copy and move objects from one layer to another?
I have been copying the objects to a new location in the old layer, then move the objects to the new layer, then move the objects back to the original location in the old layer, but this is obviouly an ad hoc solution.
I need to blur a moving object:
- The effect is only needed at some point of the video, it must appear, and then disappear, not being on screen the whole time.
- The object is moving, and changing shape, the blur must adapt to it.
- I've been trying to use the "Track Motion" option with Position & Rotation, then the "Analyze Forward" button, but the thing makes a mess all over, it's not following the object at all, then if You try to adjust it manually, it's only done in 1 frame, in the other frames the thing is off the object, then the "Tracking" stays on screen.
is this possible. A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers. it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.
View 1 Replies View RelatedFirst, MY specs.
Processor: AMD A6-5400K APU (with Radeon HD Graphics) - 3.60 GHz
RAM: 8.00 GB
System: 64-bit
OS: Windows 8
Version: AutoCAD 2004 LT
Second, what we do.
Commercial MEP design. Project in mention is a 65,000 sq.ft. Italian food market.
Third, the problem.I am experiencing a selection and double click editing problem with AutoCAD 2012LT & AutoCAD 2014LT. On Friday, June 28th we recieved updated (not new) backgrounds from a lighting designer for two floors of the building whose MEP system we are engineering. The second floor had no problems really; we reset some annotation scales and the updated backgrounds plugged right in. The first floor, however, was so messed up that we copied and pasted the track lights and all else into our file directly (vs. xref'ing) and instantly, after a save, it is impossible to evoke any kind of edit with double click. In order for us to modify anything, we have to type the command before editing. So if I want to DDEDIT, I have to type that in before changing the text. If I do select the text first than CAD freezes, takes a huge dump, wipes for 5 minutes, and then the text editor appears. This problem is ubiquitous with all 2012 LT machines and up. AutoCAD 2005 LT has no problem (lmfao).
Is it possible to attach an identify marker or title to a moving object in Video Studio X4 PRO. I video trains. As the train comes toward me in the video I would like to attach the number of the diesel and type to it and each unit behind it ,if there are any. As it comes closer the marker gets bigger and more readable then, as the diesel disappears from view it's marker goes with it and the next one does the same thing, then the next.
For example, during NASCAR races an identifying marker, showing the drivers name and car number, is applied on screen and stay "attached" to the car as it travels through traffic around the raceway until it's turned off.
I don't know if it will look good or not but I would like to try it. Is that possible or have I gone way beyond VS x4 pro's capability?
The problem in Coreldraw x6 is that when I move an object placed on a box powerclips, the movement is very slow and not fluid. There should be some option to avoid this problem. In Corel x4 this defect was not present.
View 5 Replies View RelatedHow to lock an picture (png, for example) to a moving object in Corel VideoStudio X5? maybe i might use some plugins? i know that in some video editing software this option exist and simply to use. is it real in videostudio x5?
View 2 Replies View RelatedI have some "insert" constraints for DIN rails in holes. I've moved the holes, but the DIN rail doesn't move. The refresh button isn't "lighting up", or when it does, it does not do anything to move the rail. Is there something that's been "shut off" to keep things from moving?
View 7 Replies View RelatedI am trying to use it to do something for school. I imported a 3d object from a dwg file and there is a channel that curves along it cut into that. I want to move a cylinder in this channel. I cannot seem to find anything that will allow me to make a spline that mirrors the edge of the object or to constrain the cylinder to the object.
View 1 Replies View RelatedCan you move an object while using another object's snap points?
View 4 Replies View Related