Use of functions Area2D(Geometry) and Length2D(Geometry) for theme layer provokes memory leak. Memory usage increases continuously during pan and zoom. Shortly it causes fatal error: "Out of memory - shut down".
This problem exists at least from version 2008 till 2012.
I am processing a few hundred raw images with a Photoshop CS3 action. It opens the files using ACR, does some minor adjustments, and then saves the files as JPGs. However, after a hundred or so files, the batch throws up a dialog box witth the following message:
Could not save as "K:Photos...IMG_9044.jpg" because there is not enough memory (RAM). Try saving without optimization or as baseline JPEG.
When I restart Photoshop, and run the batch again, it runs for a while, and stops again. This looks like a memory leak to me.
For what it's worth, I'm using the default RAM allocation on a system with 2GB of RAM, a dual-core AMD 64 X2 3800, and the PS scratch is on a dedicated disk with about 250GB free.
I have just gone from an 8MP to a 21MP camera and now my image files are large. When opened in Photoshop they run about 110 - 120MB. After processing 3 or 4 files having used multiple layers, in Windows XP task manager, I see Photoshop memory climbing to well over 1GB. Closing any other opened image files and purging history appears to have no effect. Eventually I start being denied certain PS functions (like creating a Black & White adjustment layer, for example) and can get error messages due to PS running out of memory. The only way out is to close PS and re-start it. I can't do large HDR or Pano processing using any more than about three image files at all.I am running Windows XP with 3GB Ram, lots of hard disk space. Windows virtual memory is set to "System Managed" and currently has about 10GB allocated. PS is set up with scratch disk on seperate drive (plenty of space). I currently have PS set for using up to 1400MB of memory (out of the 1600MB available to the process), 50 history states, and 2 Cache Levels. Iv'e tried setting the slider all the way up to 1600MB and it just takes a little longer but I eventually hit the wall anyway.I've considered setting the /3GB switch in boot.ini but am reluctant to try that. Besides, I'd probably need to upgrade to 4GB from the 3GB ram I currently have?I keep thinking it has to be a configuration problem but I haven't been able to find it.
View 4 Replies View RelatedI just downloaded the CS4 update last night, and was doing my normal photoshop work when I had to re-start the application due to what looks like a memory leak.
Windows XP, 3GHZ dual core ( 45 nm one ), 4 GB RAM, NVidia 9600 GT, no GPU enabled ( still comes up with that error even with newest drivers ).
128MB TIFF file was my source.
I had 3 layers, then copy merged all to another layer so I could liquify.
Liquify was getting REALLY sluggish when trying to zoom, but was usable.
After 10 minutes here, I clicked "ok" to return the results, then it said there wasn't enough memory to do it. So I had to cancel. Process was using right around 2 GB. I saved my PSD file ( around 256 MB ) and closed it. CS4 was still using around 2 GB with no documents open. So I closed CS4 and I had multiple errors pop up saying couldn't export or copy from clipboard because not enough memory.
Brought CS4 back up and loaded in that 256MB psd file, everything was fine.
Photoshop CS6 runs away with memory after being used and then going idle. If I open up PS and leave it, it will be ok but as soon as I open any file it will go up in memory usage (which is normal) but when I close all files and hide PS the memory will stay high never goes back down. When I close PS and re-open (no files open) again it idles at 300Mb memory but when I open a file then close it and then hide/idle PS it raises and stays around 1.25-1.5 GB if not more.
I have tried to Purge All, and even hide all menus to no avail. I have even tried to close Suitcase (eliminate any font issues) and still same problem. I am running PS bone stock, no extra plug-ins.
My Computer:
Photoshop 13.0.1
MacBookPro
OS 10.6.8
CPU: 2.66 GHz Intel Core 2 Duo
Mem: 4 GB 1067 MHz DDR3
HD: 300GB (30GB Free)
I have CAD2014 installed intalled everything has been great until last week when I got an error that I had low autocad memory. I still have 127GB available on my PC. Since I received this errow I have noticed that when moving large amounts of items on a drawing, there is a big delay in the move.
View 2 Replies View RelatedI'm trying to find a way of adding "film burn" or "light leak" effects (which give a faded, colour distorted, 70s look) to clips while editing in VSProX4. I'm working with SD avi clips, in a 4.3 aspect ratio (made with Mpeg Streamclip). find something like a "grunge" effects plug-in, compatible with VS ProX4, that is not too expensive.
My OS is windows vista, 32 bit with a 98G hard drive and 4G of ram (on Toshiba Satellite Intel duo laptop).
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
I understand that a pdf underlay will slow down AutoCad and its functions. My company just switched from AutoCad 2010 to AutoCad LT 2010, while maintaining the same computer and it has become astronomically slower. Is this an issue I have to deal with or is there a way to improve its efficiency?
View 1 Replies View Relatedin autocad there is a search bar in the upper right. is there anyway that i can make that search for dwg files? I open up about 70 dwg's a day for work.
View 3 Replies View RelatedWe never use 3d. Is there a way to turn off all of these features? I feel like it makes my Auto CAD lag and my drawing size (and PDF sizes) too big.
View 5 Replies View RelatedI have a C#-WPF-Application. In this application there is a list of blocks in my drawing. When I click one of these blocks in the listbox I have several button-functions.
One of them: Select the in the list selected block in the drawing.
Another: Explode the in the list selected block.
I found several topics with Selection, but none of them worked for me. I'm looking for a selection via ObjectId or blockname of a single block, in the most cases the selectionfilter needs an array(?).
Civil 3D 2013.
First prize for me would be to be able to access Parcel boundary vertices via managed dot net.
I could not find the boundary property of the Parcel object.
It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.
So, it is possible to combine the two to get what I need.
Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed.
Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?
I am looking at options to disable all functions during the start-up process when I netload “my.dll”. The only way I have found is by using the following
Dim BoolRes As Boolean
If BoolRes = False Then
Dim line As Line
line.ColorIndex = 1
End If
The action of trying to change a lines colour while it’s not open for write works perfectly. As in any of my functions after this process don’t load. Any better way than my above code?
I was working normally in a drawing (ACAD 2012, 32b) file when, without any apparent reason, I tried to delete something and it didn't work. The way I work is that I select first and then press the "delete" key.
Now, when I do this, absolutely nothing happens. The objects remain selected. While trying to figure out what was happening, I discovered further disruptions. For example, when I select and object and then right-click, instead of showing me the edit shortcut menu, it repeats the last command. I know what you are thinking, but I already verified the right-click customizations and it is correctly set to "shortcut menu" in the "edit mode".
Finally, when I double click on a text, it won't edit as expected; again, nothing happens. Ane yes, in "Options/Windows standard behaviour" the "Double click editing" options is selected.
All the above has it's way around: the "erase" command works, the "ddedit" text works, etc. But it slows me down horribly.
When you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedI have been using this software for a few months now, and I continue to have crashing issues. The issues, however related, are not consistent. I tend to have issues when using more complex applications of the software such as crashes when performing a breakout view, freezing and then many times crashing when manipulating a part within an assembly drawing, and several other similar issues. I have received an update SP1.1 (176) and installed it. This update states it contains a fix for issues of crashing due to excessive memory consumption.
I have 6GB of RAM, nVidia Quadro FX 3800 1GB graphics card, Intel Core i7 920 2.66GHz processor, and updated drivers...
I’m having a mental collapse blank today. I'm trying to write a lisp that toggles between two custom lisp/ functions.
just incase, the lisp is to be incorporated into a button...
I have just upgraded from Map 2009 to 2012 4-bit and many of my lisp programs using map functions do not work. Is there an explanation for this and is there a new "catalog" of data extension function and such available somewhere?
View 5 Replies View RelatedTo take civil 3D to the next level, is it possible to define a function in VBA and then use it in the label styles expressions?
Using Building Design Suite Ultimate 2014
In my Parameter equation dialog box: "cos(.5)" is red"(.5)" is black.
Does Excel need to be installed for Trigonometric functions (I don't have Excel)?
Are there any prebuild functions for Calculus in ilogic.
View 2 Replies View RelatedI would like to protect lisp functions from ObjectARX. I am able to protect the functions from LISP command prompt as below.
(pragma '((protect-assign MyFunction)))
I want to do it programmatically using ObjectARX. I have written below code but I am getting error "some other error".
struct resbuf *cmdlist;
resbuf *rb_out = NULL;
cmdlist = acutBuildList(RTSTR, _T("pragma"),RTSTR, _T("protect-assign"),RTSTR,_T("MyFunction"), 0);
int resval = acedInvoke(cmdlist,&rb_out);
if (RTNORM != resval)
{
acedAlert(_T("Error"));
}
acutRelRb(cmdlist);
When i use standard Acad-functions or even simply select an object like a polyline from land-survey,the "ribbon" changes to the corresponding Topic of the object,and the Map3D window looses its focus. (normal windows-mouse-cursor is displayed, not the AutoCAD crosshair). After clicking in Map 3D window again, crosshair reappears,and work can continue.
It doesn't matter if Map3d-windows is in windowed mode or fullscreen,it also doesn't matter if the windows is only on one of my 2 monitors or on both.
didn't have this problems using Topobase Client 2009,2010,2011...but since 2012 few problems evolved... (drawing-order-bug, memory-leak problem etc. etc.)
add a line to the code you wrote so I could use iunembed or detach the old image in the begin of the lisp command. Iunembed command ask what to name tif after it is unembed. Is there a way to detach the old embed image and run the other parts of the command? Keep in mind I change the lisp little bit.
; Attach Drawingname Image [insert] at scale 12
(defun c:AI12 ()
(defun dxf_ (n L) (cdr (assoc n L)) )
(defun dxf (n L) (cdr (assoc n L)) )
[Code].....
Is it possible to use a user selectable browser for all related functions?
I'd like to see the possibilty to select with which webbrowser Inventor interacts.
Currently the wikihelp opens in my default browser (Google Chrome), but the help function and subscription links open in Internet Explorer.
ilogic is calculating tan/sin/cos/aTan/aCos/aSin incorrectly. E.g.
MessageBox.Show(Atan(35))
Answer = 0.4738... when it should be 0.7002....
I have an iLogic rule in which I'm trying to set three user parameters for the gage of each leg of a steel angle. I want Inventor to set the gage based on the length of each leg. Here's the table I referenced for gages: [URL].
In my code, I have a sub called DetermineGage which takes the leg length, whether it's the short leg or the long leg, and determines the gages that should belong to that leg. Inside of that sub it calls on a sub called ApplyGage which then applies the determined gage to the rule's gage variables. The main sub then grabs those variables and applies those values to the actual user parameters.... In theory.
The rule executes ok with no errors, but doesn't change the value of the user parameters; they're always "0". As best I can tell, the "oGage" variables I used in the rule don't even get assigned the correct value, which makes me think the DetermineGage and ApplyGage subs can't even access the oLegLength or oGage parameters to read or set them. I don't want to use global parameters because I've heard that can make programs very unstable over time and is just bad practice. How can I make these variables accessible to all subs IN THIS RULE, no more no less?
Sub Main()Dim oLegShort As Double = Min(G_W,G_H)Dim oLegLong As Double = Max(G_W,G_H)Dim oLegLength As DoubleDim oGage As DoubleDim oGage1 As DoubleDim oGage2 As Double'Short Leg:oLegLength = oLegShort'Call DetermineGages sub to set oGage variables:DetermineGages()On Error Resume Next'If gage parameter does not equal true gage, set it equal:If Parameter("ShortLegGage") <> oGage ThenParameter("ShortLegGage") = oGageEnd If'Assume error means gage parameter does not exits. Create and set equal to true gage:If Err.Number <> 0
[code]...
i just upgraded to 2013 and my dynamc block functions have dissappeared. the ones that flip doors etc.
View 1 Replies View Related