Is it possible to use a user selectable browser for all related functions?
I'd like to see the possibilty to select with which webbrowser Inventor interacts.
Currently the wikihelp opens in my default browser (Google Chrome), but the help function and subscription links open in Internet Explorer.
I'm relatively new to the software and have somehow managed to delete/remove the bar/ribbon with all of the functions related to the actual drawing of..well a drawing.
View 6 Replies View RelatedI opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedI am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
After getting Vault installed on our server and successfully setting up users and connections, I used the Library Transfer Guide to move our Content Center (including custom) to the Vault. I then changed the Inventor Application Options -> Content Center -> Access Options to Autodesk Vault Server.
This seems to have worked, as I can Place from Content Center when in an assembly, and it is pulling standard content as well as our custom files properly from the vault. However, in the instructions that I used for the installlation, it was suggested to stick with a standard folder structure within the Vault, namely two Library Folders named 'Content Center Files' and 'Libraries' and also a regular folder named 'Designs'.
I created those folders prior to transferring the library, as I thought they would be populated with the standard/custom content. This was not the case and I am curious when these folders come into play? *they are empty*
Also, today I will be attempting to 'Check In' a project to the Vault that I recently completed; does this usually maintain structural relationships between files?
Would you recommend using a single project structure in vault for two people? It seems, since we won't be working on the same project at the same time, having a single project would not be relavant to our situation..
Inventor 2011 / Windows 7 Pro SP1 64bit
Dell Precision T3600
Intel Xeon E5-1607 @ 3.00GHz
AMD FirePro V4900
20 GB Ram
I'm trying to write a VBA macro (for Inventor 2010) that would have to work on drawing .idw files that are generated from a given component.So when I have an open assembly document, I want to go through all component occurences and work with the associated drawing.
There's a built in command in Inventor for that, in the context menu, something like "Open drawing" (mine is german, so not sure how it's called in english), which does this. It opens the drawing of the given part. From this I assumed, there must be a reference within each part, that points to the referencing drawing.
But I'm not able to find this information anywhere within the properties/objects of any component.how or where can I get this information out of the components?
I have a part called rectangle.ipt (simply a rectangle in it).
I have to creat another part, called rectangle_holes.ipt. This one, is the same as rectangle.ipt, same dimensions, but has holes in the rectangle.
Is there a way that theses 2 parts could be related, so that if the dimensions of rectangle.ipt changes, rectangle_holes.ipt automaticaly changes?
Is there a way (either thru Inventor or Vault) of print ALL idw (drawings) files related to an iam (assembly)?
Inventor (and Vault) are capable of creating and managing a BOM of the iam files and would think that it would be reltivly easy to query this bom and "find" all the associated idw files and batch print them. Possibly with the option to select the "levels" to dril down to (All, Top Level, Sub Assemblies within the iam, etc, etc)
My attempt to plot all related files form an ".iam" resulted with the following code. The code as is working for us. We use an eight digit number for file name. Plotted PDF will have revision added to file name. Any chance of making an addin or iLogic code for similar functionality?
Private PDFPATH As String'FOLLOWING CODE USES CODE FROM URL...AND OTHER PLACES INCLUDING INVENTOR HELP.Public Sub PrintRefFiles() 'BOMQuery() ' Set a reference to the assembly document. ' This assumes an assembly document is active. Dim oDoc As AssemblyDocument Set oDoc = ThisApplication.ActiveDocument Dim ASSYIDW As String ASSYIDW = oDoc.FullFileName ASSYIDW = Replace(ASSYIDW, Right(ASSYIDW, 4), ".idw") If Dir(ASSYIDW) <> "" Then 'Debug.Print strDisplayDim oDrawDoc As drawingDocument Set oDrawDoc.
[code]....
Is there a way in Inventor to take an assembly feature and basically have it fall out at the part level also? So if you were to open the part up, it would have the cutouts in it.
View 2 Replies View RelatedHow to zoom in and out via the API.
I can access the camera and eye etc. but cannot find the property related to zoom. I initially thought it was to do with the position of the eye but when I use the "Zoom" by dragging the mouse button I see that the eye position doesn't change.
I would like to connect the zoom to a slide bar and zoom in and out using that.
Using Inventor 2012, up to date on patches, realistic style (which I could use two days ago) is no longer selectable. Also when I go to the Style and Standard Editor, the Realist Appearance section has the warning triangle with the message, "Autodesk Material Library is not available".
View 1 Replies View RelatedI want to duplicate & then rename a project I have stored on my vault computer, However I am experiencing many difficulties.
There are probably around 1000 + files in this project-multiple assemblies/drawings & parts. Initially i did a Pack & Go of the Project to my desktop. I then took my first top level drawings & using Design Assistant renamed all the reference parts and assemblies related too it. This worked fine, albeit a very long time to rename all the files.
The problem is that i have say 50 drawing files, some contain similar assemblies/part files which will have already been rename in the first top level drawing & some container different assemblies/parts (which are not related to the first top level drawing) & will have to be renamed separately.
Is there an easier way to duplicate & rename a vault project because design assistant makes this task extremely laborious. An great tool to add would be to 'Find & Replace' a file name & apply it too all the files. Similar to the function in Microsoft Word.
I have looked into the copy design feature in vault however, you can only copy a project within a project, you cannot copy it to a completely new folder in the vault.
The other problem is, is that you can only add a prefix or suffix to every file/related part/assembly, & i would rather replace the project number rather then add the new project number to the file names. This would be a viable option if you could rename multiple files quickly, however this just stems back to the design assistant.
For the last few years I had my content center libraries running as part of the vault server. I have not made any customizations.
I want to try to have the content center libraries on my local machine to see if that speeds things up.
Is that possible while still using the vault server for our regular data?
Do I need to make any changes to my project file?
IV210 Professional Suite
I'm using Inventor 2012, and experiencing some trouble with certain types of projected geometry that I'm using in a sketch associated with a view in an .IDW file - but only when the view involves a break (or breaks).
I'm generating section views to show the layout of hole details at various axial locations along the part. When placing a section line, I can't "pick up" any appropriate locating geometry from the view. So, after creating the view (using just a vertical section line), I edit the sketch that defines the section line. Project some geometry (the edges of the holes, in the attached example), draw some additional geometry constrained to that, then constrain the section line to that. That works fine; if I move the view around, the section lines stay attached to it. This is what is shown in the attached "before break" picture.
When I apply a break to the drawing, though, the section lines don't follow the changing view. They stay right there, as if the view had not been broken at all. This is what's shown in the attached "after break" picture. Move the view around, and they track with it - but always staying the same "real" distance apart from each other. It is as if that projected geometry were completely ignoring the break.
I observe something similar if I start with an IDW view with one or more breaks, then create a sketch associated with the view. If I project geometry, some of it projects where it should, but other geometry projects elsewhere on the page - as if no breaks were present in the view.
The part I've shown here is something I put together as a simplified example of what I'm observing. The part I'm actually trying to detail is more complicated (many more details), and much longer (so breaks are a requirement to put it on paper).
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
View 2 Replies View RelatedI have been using this software for a few months now, and I continue to have crashing issues. The issues, however related, are not consistent. I tend to have issues when using more complex applications of the software such as crashes when performing a breakout view, freezing and then many times crashing when manipulating a part within an assembly drawing, and several other similar issues. I have received an update SP1.1 (176) and installed it. This update states it contains a fix for issues of crashing due to excessive memory consumption.
I have 6GB of RAM, nVidia Quadro FX 3800 1GB graphics card, Intel Core i7 920 2.66GHz processor, and updated drivers...
In my Parameter equation dialog box: "cos(.5)" is red"(.5)" is black.
Does Excel need to be installed for Trigonometric functions (I don't have Excel)?
Are there any prebuild functions for Calculus in ilogic.
View 2 Replies View Relatedilogic is calculating tan/sin/cos/aTan/aCos/aSin incorrectly. E.g.
MessageBox.Show(Atan(35))
Answer = 0.4738... when it should be 0.7002....
I have an iLogic rule in which I'm trying to set three user parameters for the gage of each leg of a steel angle. I want Inventor to set the gage based on the length of each leg. Here's the table I referenced for gages: [URL].
In my code, I have a sub called DetermineGage which takes the leg length, whether it's the short leg or the long leg, and determines the gages that should belong to that leg. Inside of that sub it calls on a sub called ApplyGage which then applies the determined gage to the rule's gage variables. The main sub then grabs those variables and applies those values to the actual user parameters.... In theory.
The rule executes ok with no errors, but doesn't change the value of the user parameters; they're always "0". As best I can tell, the "oGage" variables I used in the rule don't even get assigned the correct value, which makes me think the DetermineGage and ApplyGage subs can't even access the oLegLength or oGage parameters to read or set them. I don't want to use global parameters because I've heard that can make programs very unstable over time and is just bad practice. How can I make these variables accessible to all subs IN THIS RULE, no more no less?
Sub Main()Dim oLegShort As Double = Min(G_W,G_H)Dim oLegLong As Double = Max(G_W,G_H)Dim oLegLength As DoubleDim oGage As DoubleDim oGage1 As DoubleDim oGage2 As Double'Short Leg:oLegLength = oLegShort'Call DetermineGages sub to set oGage variables:DetermineGages()On Error Resume Next'If gage parameter does not equal true gage, set it equal:If Parameter("ShortLegGage") <> oGage ThenParameter("ShortLegGage") = oGageEnd If'Assume error means gage parameter does not exits. Create and set equal to true gage:If Err.Number <> 0
[code]...
I made a simple dialog to access some of the iproperties. This is quite handy when working on a drawing of a part, but there is one flaw with this script. If the part's description has a function referencing the parts dimensions for instance, when my script gets the description it gets the plain text and not the formula. Meaning if the part's description is "=<d0> X <d1> X <d2>" and appears as "1 X 2 X 3" the script will get "1 X 2 X 3" and when it resaves the description it will over write the formula with plain text.
Is it possible to get the formula so my script could display that for editing instead of the plain text?
Below is a part of the code I'm using and it's the standard code I've seen for retreiving ipropterties.
Dim invDoc As Document Set invDoc = ThisApplication.Documents.ItemByName(GetToken(PartList.Value, 3, Chr(1))) Dim invDesignInfo As PropertySet Set invDesignInfo = invDoc.PropertySets.Item("Design Tracking Properties") Dim invProperty(1 To 4) As Property Set invProperty(1) = invDesignInfo.Item("Part Number") partnumber.Value = invProperty(1).Value Set invProperty(2) = invDesignInfo.Item("Description") description.Value = invProperty(2).Value
I am working on creating a new part file Template. Any useful and productive iLogic functions those are already available.
A while ago, I had seen one that would simply triger when part was checked in or saved. It would check if the material feild was utilzed or forgotten at Default.
share if there are any good iLogic functions that we might benefit from.
C1
Inventor Professional 2013
Vault Collaboration 2013
how the internals of Inventor / iLogic are working.
We have multiple instances of Inventor running on a 12 core workstation so we can push configurations through concurrently - each Inventor instance is assigned its own processor affinity and each instance has its own project which points to seperate directories of Inventor models.
Everything seems to work OK when there are up to 5/6 working concurrently, but as soon as there are more than 6 the iLogic functions seem to grind to a halt - note that the rules are external rules.
For example, this function took 11 seconds to complete when there were 10 concurrent orders processing. :
Parameter("BLANK", "EDGE_FRT_ACTIVE") = "YES"
Similarly these functions took 11 seconds in total to complete :
iProperties.Value("Custom", "M1110900_P1PO") = iProperties.Value("Custom", "BLANK_GDIM") - iProperties.Value("Custom", "PANEL_GDIM")iProperties.Value("Custom", "M1110900_P2PO") = iProperties.Value("Custom", "BLANK_XGDIM") - iProperties.Value("Custom", "PANEL_XGDIM")iProperties.Value("Custom", "M1110900_P1OR") = 1iProperties.Value("Custom", "M1110900_P2OR") = 0
When I run these with less that 6 concurrent Inventor processes, they're are almost instant.
I just don't know where the bottleneck is. I've ruled out :
- Processor (each core never reaches above around 60%)
- RAM (we've got 48GB of RAM, with about 15GB free at worst)
- Disk (disk IO is busy, but it doesn't look like it's the bottleneck)
- Graphics (Inventor is in silent mode, with no UI, so graphics activity is minimal)
From the tests I've done it seems to be the iLogic functions that are the bottleneck. My next port of call is to change the iLogic functions to actual API calls, but I suspect I'll get the same results.
So, my questions :
Is Inventor queing these iLogic API calls somehow (note we're creating a unique instance of the Inventor.Application COM object for each processing thread) ?
Is there an issue with using external rules with nultiple instances?
Dell Precision R5500, Intel Xeon X5690 3.47GHz (x2)
48GB RAM
Inventor 2013 (PDS Premium)
64bit Windows 7 SP1
I used to have an A1 printed sheet of all of the ilogic commands, functions, syntax or whatever you call them. It was all nicely grouped and colour coded etc
Unfortunately I have since moved jobs and lost this and neither me or google can find this again, any copy or link? it may have been a pdf or excel format.
I need to use the property " File Subtype" for programming a function in logic, but inventor not recognise this property.
I use this function "If iProperties.Value("Project","File Subtype")=Sheet metal"
How i can do for use this property for a ilogic function?
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies View RelatedI am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies View RelatedI have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Why sometimes we have an asterisk (a star) after the file name in the browser (in "Vault mode")? see attachment
View 1 Replies View Related