AutoCAD Map 3D :: Map Classic Workspace Dropdown Missing
Aug 1, 2011
I'm new to AutoCad Map 2011. If I recall correctly from the last time I used a map product (3D 2006) there were map tools available from the drop down menu. I have set my workspace to map classic but cannot locate any map tools. I've tried entering the command "CUI" but cannot locate any map tools there either. I was most interested in coordinate systems, I read about the coordinate tracker in 2011 but I cannot locate that either.
View 6 Replies
ADVERTISEMENT
Mar 8, 2011
How to add the Autocad Classic option into my workspace pulldown. I only have Architecture as an option and I can't get the traditional tool bar display.
View 3 Replies
View Related
Aug 28, 2012
I just installed Autocad Architecture 2013 only to learn that Autodesk once again is hard at work making our lives difficult. For some reason they seem to want us ALL to use the ribbon. The ribbon in my opinion is HORRIBLE. I MUCH prefer the classic workspace since I do not use many toolbars and I key in the vast majority of my commands. As such, I get rid of the ribbon because it takes up too much space considering the fact that I only use a handful of buttons from the ribbon. But Autodesk has thrown a bunch of obstacles in my way.
1. Type "ribbonclose" - this closes the ribbon.
2. Type "cui" - this bring up the Customize User Interface dialogue box.
3. Right click on workspaces. Enter a new name for your new workspace.
4. (optional) Right click on toolbars to make your own. Then drag and drop commands from below into your new toolbar.You may also notice that you no longer have toolbars, soooo..
5. Type "menuload" - things brings up the Load/Unload Customizations dialogue box.
6. Click "Browse".
7. Select the first file ending in ".cuix". Click "Open". Click "Load". If you get an error message don't worry.
8. Repeat step 7 for each and every file ending in ".cuix".
Now you have tool bars and menus. However, the Express menu may STILL not work.
9. Then visit this webpage:URL.... to get the Express menu working.
10. Close autocad. and re-open autocad.
11. Set up your screen the way you like it.
12. Either click on the workspace switching icon on the lower right portion of your screen or type "workspace" and select "Save Current As".
13. Save your workspace with whatever name you like.
View 1 Replies
View Related
Jun 17, 2013
Is there a way to add drop-down style buttons to the AutoCAD Classic workspace similar to the ones found in the 2D Drafting and Annotation workspace? (Ex. Drawing Circles, etc.)
View 1 Replies
View Related
Nov 13, 2012
i having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
View 6 Replies
View Related
Sep 21, 2013
We have 3 to 4 workspace settings in Autocad in which I am using Autocad classic setting. I have made Autocad classic seeting current and default in workspace setting but nowdays i am facing problem that while opening Autocad, drafting and annotation setting overcomes and always opens with drawing. I am unable to set Autocad classic style permanent.
View 9 Replies
View Related
Sep 6, 2012
I am using 64 WIndows version of CS5.5. Even my basic filters (blur/gaussian) are missing from the dropdown menu.
View 8 Replies
View Related
Feb 15, 2014
My computer was recently repaired to remove a would be virus and my PSE 12 plug in was missing from the external editing drop down? I thought I saved the instructions, but cannot find them. I remember where to go; just don't remember what I am looking for to choose?
View 1 Replies
View Related
Oct 2, 2012
since upgrading from photoshop elements10 to 11, i cannot now sync my photos to my apple tv with Photoshop the dropdown tab in itunes is missing.i have uninstalled and re-installed Photoshop elements and iTunes but no luck .
View 9 Replies
View Related
May 17, 2012
I thought I had a grasp of the CUI routine, but apparently not. I copied the Image panel from the "Insert" Ribbon tab in Task-based Geospatial, and got it where I wanted. The commands are there, but the images are not - just the infamous cloud with "?". I can go back into Task-based Geospatial workspace and the icons are there, but I can't figure out where they are being referenced. Are they embedded here somehow? In the CUI under both the main .cuix list of ribbon panels and those for the partial workspace for TASKBASEDRIBBON, the button images are not linked to anything, just the cloud with "?" It seems that I need to be able to copy the Image panel from the right side window (when Task-based Geospatial is set to current) over to the main .
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 3 Replies
View Related
May 14, 2013
I am unable to find the "Ribbon Combo Box - Workspace" to our 2013 MEP or ACA CUI. It is visible in vanilla AutoCAD 2013, but it isn't listed in the Command List (under Ribbon Control Elements). I am unable to transfer it from AutoCAD's cuix either. We typically have this control in our Quick Access Toolbar, but I am unable to create this same environment in the 2013 verticals.
I am unable to see it even using one of the default profiles, like "AutoCAD Architecture (US Imperial)".
View 2 Replies
View Related
Feb 19, 2012
I'm not really sure what is going on, but I have cs5 extended and I don't seem to have a motion workspace. I don't really want to completely reinstall, so I came to ask if there is anything I can do first. I've tried resetting the defaults with no results. Is there a place where I could download the workspace presets and install them?
View 4 Replies
View Related
Apr 11, 2012
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies
View Related
May 1, 2011
I am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies
View Related
Jan 4, 2012
is there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies
View Related
Nov 14, 2011
I have just installed Autocad 2007. The screen display is the 3-D screen, even though I select the Autocad Classic display. How do I get to make the selection work to what I want displayed?
View 3 Replies
View Related
Aug 23, 2012
recently i have installed autocad 2011 in my pc. but some toolbars are missing like layer,draw line,multiline,polyline rectangle ( which are the usual feature of classic autocad 2004 or 2007). how i will find the classic toolbars in autocad 2011.
View 8 Replies
View Related
Apr 30, 2013
I just installed the student version of ACA 2011, but it does not show any ribbon and I could not even set up the classic look either.
View 2 Replies
View Related
Jun 16, 2012
Where can i find the "plug ins" i have added to the autocad in the classic screen, (and their symbols also)?
(In the other screens there is a special "tab" named "plug- ins").
View 1 Replies
View Related
Sep 11, 2012
I am using autocad arch 64 bit on win 7 and am having problems switching out of xref classic so that the newer xref dialog comes up. i edited the SDI but then i cant close a drawing and opening creates more problems.
is there a way to get the xref dialog back?
View 9 Replies
View Related
Feb 20, 2013
we have just installed CAD2011 on a new comp... and for the life of me- I an not remember how to change the view to 'classic'.
View 2 Replies
View Related
May 12, 2013
I have encountered a problem when attempting to save my DWG. A message appears quickly then the program closes, or the program will just instantly close when I hit save. I am using Cad 2012 on a macbook pro. see the attached file that is a screenshot of the pop-up that I receive.
View 3 Replies
View Related
May 30, 2013
There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies
View Related
Oct 9, 2013
I use classic interface in Autocad. After minor modifications in menu of 2014 version, window list disappeared from menu bar. See picture below:
How it can be inserted here?
View 6 Replies
View Related
Sep 3, 2013
I found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
View 4 Replies
View Related
Jun 13, 2011
I recently upgraded from 2007 to 2012 and the entire look and feel of the program is different. Like Microsoft, AutoCad has "upgraded" everything so overnight i have managed to go from marginally competent to totally inept!
I really really would like to know if it is possible to switch back to the classic view with the old tool bars and commands.
View 9 Replies
View Related
Mar 9, 2012
How can I change the display of layout as shown in the picture to small tabs as it was in older version of AutoCAD?
GET.PNG
View 1 Replies
View Related
Nov 22, 2012
I'm referring to the new array ribbon, and not the classic mode (ARRAYCLASSIC cmd). Is it possible to?
View 3 Replies
View Related
May 4, 2012
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
View 1 Replies
View Related
Jun 2, 2012
I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
View 3 Replies
View Related
Aug 9, 2012
Is it possible with the hatch command to be able to select objects first instead of picking an internal point?I looked at this thread first which covers the same problem but not sure if there ever was a solution. URL....
HPDLGMODE is currently set to 2, I tried setting it back to 1 but that brings up the hatch popup window as it does in Classic mode and 0 does the same thing as 2.
View 5 Replies
View Related
