AutoCAD Map 3D :: Feature Overlay Areas
Sep 12, 2011I have brought in Civil 3D data via sdf (points and plots/parcels) and have done an intersect query but the area of the original plot and resulting intersection are the same.
View 4 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Feature Overlay Analysis
Aug 5, 2011I have created two feature buffers - one at 25m and one at 50m. I only want to show the area between 25m and 50m and am struggling to get the Feature Overlay analysis to do this. Is it possible and if so how?
There are no intersecting areas and I'm trying to display the "doughnut" area.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCad :: Measure Areas Of Many Rooms And Arrange Areas In Table
Aug 15, 2011I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View RelatedRevit :: Why Create Area Schedule Of Areas As Opposed To Using Room Areas
Sep 22, 2011What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedGIMP :: Aerial Photo Of Island - Make Water Areas Black And Land Areas White
Jan 29, 2013In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedPhotoshop :: Saturating Saturated Areas/desaturating Desaturated Areas
Jun 6, 2009I'll make the important parts bold.
View 3 Replies View RelatedAutoCAD Map 3D :: GIS Data - Feature Was Not Saved In The Target Feature Source
Jun 16, 2011I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies View RelatedPhotoshop :: CS5 / Colours Are Being Over Saturated In Shaded Areas And Less Saturated In Light Areas
May 8, 2012Colours are being over saturated in shaded areas and less saturated in light areas when filled over an aeea. The colours need to remain the same saturation level when darkened or lightened. Is a setting affecting the saturation levels?
View 12 Replies View RelatedAutoCAD Map 3D :: Feature Labeling - Obscure Feature Symbols
Jul 24, 2012I am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
Photoshop :: Use The Sharpen Feature And The Unsharp Mask Feature?
Nov 24, 2003I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
View 2 Replies View RelatedAutoCAD Map 3D :: Measuring Areas In 2012?
Jul 15, 2011I've tried to measure the area of a road layout (that includes curves) and it is giving me a completely unrealistic answer (310,000m2 instead of 41,000m2). If I de-curve the lines, the area is about right, but the lines MUST remain curved for me to get the most accurate measurment. why curves aren't being measured properly, and is there a setting I can use to make sure this doesn't happen again?
View 4 Replies View RelatedAutoCAD 2010 :: How To Calculate Areas
Apr 17, 2012I have a question: ¿Which scientific calculation's method usually autocad utilize to calculate areas?
View 1 Replies View RelatedAutoCad :: Calculate The Areas Within A Set Of Lines
Jul 10, 2006I need to calculate the areas within a set of lines that form a closed area.
1. How do I do that?
2. Do I need to create a polyline around the area, or is lines enough?
I use AutoCad Map 2000i
AutoCad :: How To Change Colour Of Certain Areas In DWG
Apr 18, 2013I have a dwg that I need to change the colour of certain areas, they are a mix of blocks and blocks with attributes, if I explode them all the attributes turn into text I have tried a few ways but apart from clicking on everything and doing it one by one I cant seem to do it, is there a quicker way,I have attached the dwg and everything outside of the magenta box needs to be grey while keeping the colour under the box. The file is 5.5 mb and wont upload
View 9 Replies View RelatedAutoCad :: Create PDF Hatch Changes In Certain Areas
Sep 30, 2011when i create a pdf my hatch changes in certain areas (linetype seems to get thicker) i am using 2007?
View 3 Replies View RelatedAutoCAD Map 3D :: Green Areas In PDF With Raster Image
Apr 26, 2013I have a problem with a drawing, containing aerial images.
If I try to plot it as PDF, using "Adobe PDF" or "PDF-Creator" as printer, I see green areas in my PDF. Here the result:
If I use the AutoCAD Printer "DWG to PDF.pc3", there is no problem. Here the result:
For the creating of PDF files I can use the AutoCAD printer, that is no problem, but I have the same Problem if i try to plot a drawing with aerial images on a Plotter (HP 1050C) or any other printer in our office.
AutoCAD Map 3D :: List Hatching Areas 2012
Jul 9, 2012I’m trying to list the area of hatching in a few drawings. I’ve used this method in the past to figure this out. I’m using AutoCAD Map 3D 2012. I used Map 3D 2010 and could simply list the hatching and see the areas.
View 3 Replies View RelatedAutoCAD Civil 3D :: Calculate Catchment Areas
May 1, 2013Trying to calculate a catchment area to allow me to size some culverts using Civil 3D 2012 Sp#1.
" The specified location results in a Catchment with no area."
After sitting for 15 miutes I keep getting the above message. The surface is huge and there is an obvious catchment area (or I think it is obvious). The surface was generated from contours and cover an area of approx. 8Km x6.5Km but the catchment ares should be around 15-20% of that area.
I tried another one upstream about a Km and it worked fine. So the one I am doing now should encompass the upstream area as well as from that point downstream to the Discharge Point.
AutoCAD LT :: Linework To Black And Be Able To Have Shaded Areas
Sep 22, 2011I have been trying to print to my local windows printer (monochrome laser) and to a pdf file but cannot seem to get all of my lines black. Different colors, by layers, produce a greyscale arrangement of linework. I have tried changing the plotstyles to the various available plotstyles: Monochrome.stb, Monochrome.ctb and Autodesk-MONO.stb, but have not had any success. All are printing the same.
Ideally I would like to set most linework to black and be able to have shaded areas and some linework in a grey tone when needed.
AutoCad :: How To Find The Areas To Exact Precision
Sep 17, 2012I have a problem of weather of not you can change the accuracy of the calculation of areas in AutoCAD 2011.
In my line of work, we need to find the areas to exact precision, though it seems that my AutoCad is messing with the calculations and rounding up.
E.G AREA - .017666 and turns it into .002
I calculate the Area thorught the usage of Polylines, and or the area command when i need to.
mabye to change it to give me EXATE AREA!?
those who are deemed awesome get a virtual cake, and the cake is NOT a lie....
AutoCAD Civil 3D :: Identifying Areas Of Widening
Jul 13, 2013I'm working on a windfarm access road (5m wide with widening at bends to 8m) and I need to identify the areas of widening.
I've got the centreline alignment and created the 2.5m offsets to each side. I have also created widening on the insides of the bends using the widening tools and used a linear taper at entry and exit. I now need to hatch up the portions where the road has been widened to demonstrate compliance with the specification and the only easy way I can see is to export to autocad and use the hatch tools (not tried to hatch between alignments).
Whilst this works it isn't dynamic so if the alignment is adjusted the widening alignments are also moved but the hatching remains.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCad :: Inserting Color Into Specific Areas Of DWG?
Jan 18, 2013I am working on a construction drawing. It's a reflected ceiling plan. The area is large, it's a large commercial building. Some areas have gypsum ceilings and some areas have none. I would like to colorize the areas with the gypsum ceilings only.
View 9 Replies View RelatedAutoCAD Civil 3D :: Display Areas For Polylines
Aug 1, 2013I have a bunch of polylines I want to display the areas for. I am using mtext and fields. However the fields format part always defaults to a less than desirable format. Is there a way to set the formatting how I want it for the entire file? Or is there a better way of labeling than fields?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCad :: Copy Object Into Certain Areas Of Island
Jan 1, 2012I have a map of an island. I am trying to copy and object say a block or triangle into the certain areas of the island several times. How can i do this using the command.
View 4 Replies View RelatedAutoCAD Inventor :: Isolate Areas Of View Break?
Mar 5, 2013is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.
Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
AutoCAD Civil 3D :: Assign Pay Item To Closed Areas
Oct 31, 2012Is there a way to assign pay items to a selection set of closed areas? The tool seems to only allow the user to pick one object at a time.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
AutoCAD Civil 3D :: Blown Section View Areas
Apr 13, 2013see attached graphic
simple road widening section
subassembly from centerline is LINKOFFSETONSURFACE out to a target alignment
next sub is good old LANEINSIDESUPER, using depths for PAVE1DEPTH and SUB-BASEDEPTH
the corridor definition under SURFACES specifies top links for both PAVE1 and SUB-BASE surfaces, but they appear to ignore that and cut across the road (see graphic) making a mess of it
do I need to add a link code to LINKOFFSETONSURFACE subassembly? other work-around?
AutoCAD Civil 3D :: Surface Volumes In Specific Areas
Apr 16, 2013I have a 100 acre park that I am doing earthworks. I have 1 proposed and 1 existing surface. The park is now broke into 5 different areas and I need to get cut and fill for each area. Is there a way to do a volume report for a particular area? I could define the area with a polyline. Or do I need to copy the proposed surface and start chopping up into 5 areas?
View 9 Replies View RelatedAutoCad :: Adding Transparency To Solid Fill Areas
Aug 28, 2012providing a fantastic resource for all ACAD users, of all abilities.
I would like to know if it is possible to turn a solid fill area into a transparent appearance.
This is in a 2D drawing.
AutoCad :: How To Find Areas Of Stream Cross Section
Mar 13, 2012I am using autocad to find areas of a stream cross section such that when we take a water height measurement of the stream in the field, we can easily get the area from a spreadsheet since the cross section of the stream at any height will be known (once I get done in AutoCAD).
To further illustrate my needs, I have attached a picture. I need all the seperate areas between the red lines (the red lines are equally spaced vertically and have lengths that go end to end to the edges of the stream).
I have been hatching between the red lines and taking the areas of each hatched object. However, this is a slow and tedious process.
Hatching is not the issue because I can hatch multiple objects at once using the create seperate hatch option.
What I need is a way to list all the hatched object's areas into a text file so that I can easily copy and paste them into an excel file. Even if it is not a nice and neat list, I can atleast use a find for "area" to get them into a nice list a little faster.
cross section for forum.jpg
AutoCad :: Overlay One Drawing Onto Another?
Jun 28, 2013How can I over lay one drawing onto another as simple as poss.
View 1 Replies View Related
