I’m trying to list the area of hatching in a few drawings. I’ve used this method in the past to figure this out. I’m using AutoCAD Map 3D 2012. I used Map 3D 2010 and could simply list the hatching and see the areas.
View 3 RepliesMy AutoCAD 2012 freezes every time when I do hatching. It doesnt matterthe size of the drawing nor the type of hatch I use.
View 5 Replies View RelatedMy AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
I've tried to measure the area of a road layout (that includes curves) and it is giving me a completely unrealistic answer (310,000m2 instead of 41,000m2). If I de-curve the lines, the area is about right, but the lines MUST remain curved for me to get the most accurate measurment. why curves aren't being measured properly, and is there a setting I can use to make sure this doesn't happen again?
View 4 Replies View RelatedOur company is looking for training in Autodesk Civil 3d. We contacted a local re-seller, but unfortunately their quote was higher than our company can absorb at this time with the economy. Is there a public list that has certified trainers in different market areas? We are located about 40 minutes North of the Philadelphia area.
View 9 Replies View RelatedI have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View Relatedi do not know what i did, but i have lost my parts list (left side).
how can i get it back on screen?
Experts, how do I get a list of all internal iproperty names in Autodesk Inventor 2012
View 1 Replies View RelatedIV2012 API with VB:
How can i add an item to a Multi-Value-List of an existing User Parameter in Inventor2012 (Accessing API with Visual Basic) ?
My idea is for example:
uParams.Item(i).ExpressionList.AddItem(As String)
The problem is, that such a function "AddItem" doesn't exist.
We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedWhat is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedIn the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedI'll make the important parts bold.
View 3 Replies View RelatedI'm attempting to get Smoke 2012 SP1 running on Mac OS X 10.7.2. After installation, I cannot get the application to launch -- instead I get a "DlVideo Error: No video list" error and then exit.
Hardware specs are attached, in short 2 x 6 core Mac Pro, 24GB RAM, Quadro FX 4800 and Kona 3G. This is built on a clean install of 10.7.2 using the Apple video driver for the 4800. The display is an Eizo ColorEdge CG303W, attached to the 4800.
I would like to install the 4.1.28 CUDA drivers to enable the Mercury playback engine (as this machine will probably also run Premiere Pro), however I'm trying to keep it as simple as possible until I can get Smoke running.
A Euphonix MC Transport and MC Color will be added to the station, however they are not currently attached.
My workstation name is bc118-s001. I'm using an external license server (macnv3), which is running properly.
Storage is currently set to the local disk, which I know is sub-optimal. Ultimately the storage volume will be a fiber-attached TerraBlock 24D, however I'm upgrading that device from 4.6.4 to 5 before I put the unit into production, and would rather not store any data on it before the upgrade.
I've attached the application and shell logs for your reference. The following lines are only the errors from the app.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_app.log | grep -i error
2074786144 project.C:4713 02/04/12:11:36:35.936 PRJMGT : Load Project, failed to switch to group users
2074786144 video.C:1068 02/04/12:11:36:41.379 VIDEO: non-standard monitor refresh rate (0.000000). Audio/Video playback may not be in sync.
2074786144 EuTop.C:65 02/04/12:11:36:41.467 Control Surfaces : Initialisation failed (error 46)
2074786144 error.C:332 02/04/12:11:36:42.950 ERROR: DlVideo Error: No video list
2074786144 error.C:110 02/04/12:11:36:42.950 DlVideo Error: No video list
2074786144 messageAccumulator.C:268 02/04/12:11:36:42.959 Error: DlVideo Error: No video list (Press ESC)
I notice that the monitor refresh rate is not being detected properly, however the OS seems to detect it properly.
These lines are the errors from the shell.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_shell.log | grep -i error
Feb 04 11:36:42 : ERROR: DlVideo Error: No video list
Feb 04 11:36:42 : DlVideo Error: No video list
Colours are being over saturated in shaded areas and less saturated in light areas when filled over an aeea. The colours need to remain the same saturation level when darkened or lightened. Is a setting affecting the saturation levels?
View 12 Replies View RelatedThe hatching appears in model space and paper space, except when i print from paper space, to PDF for example, the hatching disappears. why you can see the hatching in paper space but when you print to PDF it doesn't come out.
View 2 Replies View RelatedWe have some VIPs coming to see our new waste treatment facility. I was asked to make a pretty picture for them. So I started to hactch our site plan. Roads with gravel, grass, solid for tanks. They wanted more... So i changed tanks and grass to gradients and that was ok. When I tried to change the roads to a gradient, the tanks and grass became the new gradient and the road diappeared (blank). This is in ACAD 2013. I tried to do it in 2012 and the system crashed. When I restarted ACAD asked to send error message. The road is outlined in a polyline, as are all other objects beacause I have learned that ACAD can't handle the pick area unless it is a very small area. So I have lots of extra lines that are on defpoints or a separate layer, and hatches on their own layer.
View 5 Replies View RelatedAutoCAD generates gaps to my drawing, sometimes there is NO gap and then it says there is when I'm selection new are to hatch (puts the red circle to old place where it didn't earlier say there is gap!). I have tried to use Gap Tolerance tool first with value of 10 but it didn't work. After that I changed it to 1000 and it worked but the hatch area wasn't good. I also tried to pull line over other and trim it, didn't work either. Used also join but it didn't work.
I have used object snap always when I drew the picture. I have zoomed as much I can and there is no gaps.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
I've got a hatching problem...whenever I try to use a "dot" hatching...at a scale of 50.000....I tend to get this wierd white spots on different areas...and it seems to flush with the MLeaders...(See Attached Image).
View 4 Replies View RelatedMy colleague is using AutoCAD 2012 LT. He was wondering is it possible to hatch an un-hatched object by matching it with the properties of a hatched source object?
View 1 Replies View RelatedSo i'm trying to place a solid hatch inside a circle. AutoCAD seems to ask all the questions but then doesn't add the hatching. I tried ansi31 hatching and there is no difference. Current layer is on, color that should be seen.
View 2 Replies View RelatedI've noticed when I try to hatch something it will regen model every time after I select boundaries.
Below is from command line. How can I turn it off?
Command: BH HATCH
Pick internal point or [Select objects/seTtings]: S
Select objects or [picK internal point/seTtings]:Regenerating model.
Regenerating model.
1 found
We are using section views in our drawings. However, we don’t want any hatching to show up. I’ve scoured the hatch libraries and hatch documentation and I have not been able to figure out how to turn hatching off, or alternatively to create a hatch style that is blank. My attempt at creating a blank hatching file is attached, but it didn’t work.
How can I turn off hatching or create a 'blank' .pat?
When a co-worker is trying to hatch using pick point, multiple red circles start appearing and choke up the program. He is not even picking inside the area where these gap indication circles are appearing. I have had him adjust the hatch gap tolerance but am wondering if I can turn off this behavior entirely?
View 4 Replies View RelatedI have small problem. When I use hatch on certain area it also wants to hatch one closed area ,however other closed areas do not hatch. I rechecked , remade the closed area which is hatched along side with the area I really need to hatch. So how can I isolate that little area? Or what is the problem?
View 6 Replies View RelatedIs it possible to change the cut and fill pattern from solid bands of colour to bands of colour cross hatch (for example)? The reason for this is, when printing the drawing uses a lot of ink.
View 8 Replies View RelatedIs it possible to have the hatching fade (become more transparent) so the hatched object is completely hatched up one end and then progressively transition to completely transparent at the other?
View 8 Replies View RelatedI'm trying to hatch multiple objects in one go, most of which overlap with eachother in places. When I do this, the overlapping areas don't get hatched. I've tried selecting different options for island detection, but this doesn't seem to work.
View 6 Replies View RelatedCan I hatch a 3D solid surface? Do I have to create a 3D face on top of it beforehand?
View 7 Replies View Related