AutoCAD Map 3D :: 2002 On 64 Bit - Drawing Pauses And Then Deleted?
Dec 18, 2012
I have 2 drafters that are working on AutoCAD Map 2002 programs with Windows 7 64 Bit operating systems. When I started back in August I noticed something absolutely bizarre. I have not come across this before so I am now escalating it to you experts.
What is happening is that the drafter will be working on a DWG. They will save multiple times. Even exit the drawing and come back to it the next day. While in the drawing (on the server OR on their computer, doesn't matter) the drawings will occassionally lock up and get the blue wheel. Then it will simply shut down.
Here is the strange part. The drawing file is deleted from the folder. All save points and everything. Just gone. Sometimes a random save file will be created in the same folder. This has saved us a couple times. But more often than not it is simply gone.
I am trying to convince my VP that we need to upgrade our AutoCAD licenses on these 2 machines.
View 1 Replies
ADVERTISEMENT
Aug 23, 2011
I deleted drawing1.dwg but every time I power up Autocad 2011 it keeps coming up. This drawing has a small square in the southeast corner of the screen. Why is this happening?
View 9 Replies
View Related
Oct 10, 2013
I have a number of layout tabs with varying layer controls applied in multiple viewports. This layout may be made up of a number of xrefs. I end up with a lot of layers in the host drawing from the xrefs, and even after I purge the xrefs to eliminate some of the xrefs, the layers remain in the host drawing, even though they no longer exist.
Is there any way to update the xref definitions to get rid of the layers without losing the layer setups I have? VISRETAIN is set to 1, and if I reset it to 0, I will lose all of the viewport controls I have put in place.
View 6 Replies
View Related
Feb 22, 2013
how to model these 3 curves so that I can get a surface such as the attached images in AutoCAD 2002?
View 9 Replies
View Related
Jan 17, 2012
I wanted to know if there was a program that can open 2012 drawings on autoCAD 2002?
View 4 Replies
View Related
Mar 24, 2011
Problem converting with DWGgateway PDF converter for autoCAD 2002.
Every time I try to convert my drawing in paperspace to a PDF, the objects in the model space do not show up. However everything on paperspace appears. The layers are not set to do not plot.
View 3 Replies
View Related
May 15, 2012
How I can make the revision cloud in Autocad 2002. Does it have the function? In which meny is it? What is the short command?
View 7 Replies
View Related
Aug 4, 2010
Civil 3d 2010
Our cursors are pausing for about 2-3 seconds when mousinging over a point, it seems like it is struggling with the rollovertip tooltip information. It doesn't happen on other objects, just points. If we turn rollover tooltips off there is no pause at all. But we really like the rollover tooltips and it would be a shame to have to disable a feature to be able to move around a drawing efficiently.
View 9 Replies
View Related
Feb 15, 2012
I am attempting to import a previous customized menu with routines that worked beautifully in Autocad 2002. I can import the menu but the routines don't work. I have copied the search paths identical to those in Autocad 2002 in the tools>options>files in the support file search path, but to no avail.
The menu was developed by Andy Pease (Andy Acad) who is now with Autodesk.
View 1 Replies
View Related
Oct 6, 2010
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
View 4 Replies
View Related
Jul 26, 2013
I made a web site with PShop and GOLive back in 2002-2005, I do not have PShop or GOLive anymore, but i wish to edit the path address of those HTML pages generated by PShop and GOLive in 2002-2005, all i have is PS Elements10 and it does not recognize them, and none of my other programs will open the HTML pages so that I can edit them .
View 1 Replies
View Related
Apr 28, 2011
The scene i am working on is relatively light , and i am still running into this , everytime i go to select a mesh nothing happens for what seems to be ages (4-6 seconds) and then the mesh becomes selected. then if i go to select another mesh , the same. This is really slowing down my artist flow and making the work become a chore.
View 7 Replies
View Related
Jun 12, 2013
I need to create an action to resize several hundred horizontal images. Each image must be sized to a specific width and then cropped to a specific height. When I crop the image, I need to adjust the cropping box to accommodate the image content. Then I will save the image as a new file.
How do I a create a pause in the action so I can position the crop manually before I save the image?
View 1 Replies
View Related
Sep 15, 2011
I've been trying to figure out if it's an object naming thing, or is there a way to not pause between loops?
View 3 Replies
View Related
Jun 19, 2013
I've a nwe camera Canon 5D Mark III and I've some problems with these file.
When I edit in Corel Video Studio X6 all videos play in the preview screen bad because It have some short pauses.
The videos do not work in a continuous way.
I bought more RAM and now I've 12gb. Also I work with other HD files, like GoPro Videos, and I dont have problems in the preview. Maybe the container of 5D Mark III videos?
View 4 Replies
View Related
Feb 8, 2011
I just upgraded my computer by doubleing the RAM to 4Gb. Now CorelDraw (12 on XP SP3) is lagging. Almost every time I switch tools, make a change, zoom in or out, or do anything, it sits there doing squat, totally unresponsive for about a minute (yes, I do my 60 seconds) or more, then suddenly catches up. This is an excedingly frustrating if not outright impossible way to work.
My project is at the stage where yes, I NEED Draw. I need it working. Quickly and effeciently. The way it was before the memmory capacity was Improved.
View 14 Replies
View Related
Apr 15, 2013
Are the previews of deleted images themselves automatically deleted from the previews folder?
View 1 Replies
View Related
Jun 20, 2013
I currently working on a drawing which has previously been drawn by somebody else. I probably have 10 different layers within the drawing. However in my layer properties manager I have 37 all of which are turned on unlocked etc. When I try to purge theses layers are not deleted. Is there any reason why I can see theses layers and more importantly erase them?
View 5 Replies
View Related
May 25, 2012
Is there a way to "lock" layers so that they cannot be deleted or purged from a drawing?
I have a template with all titleblocks, layers, dim styles, and such, all set up. But since there are a small group of layers that are not actually used in the drawing or template they are "purgable" or "deletable". As far as I understand locking the layer locks the geometry to keep it from being edited so it will not work for what I am thinking.
View 9 Replies
View Related
Feb 21, 2012
AutoCadLT2012 has deleted the data from all the files I was currently working on. The files are there and the backup is there , but all data has been removed. I have searched my entire computer (three hard drives) and Acad backup, auto save, etc. and the files are there, but no dwg.
View 5 Replies
View Related
Sep 28, 2011
How do you constrain an object to the origin once the origin constraint has been deleted. I'm not really sure how it became unconstrained in the first place. When I try to constrain the drawing using the coincident constraint it won't allow me to select the origin.
View 1 Replies
View Related
Feb 9, 2012
I have created a mlstyle definition.
It is not set current and It is not in use in the dwg, but when I open the mlstyle dialog box, I cannot delete the style.
View 3 Replies
View Related
May 11, 2011
I have a CAD file that will not let me delete layers, get the usual message; "The selected layer was not deleted . . . . ". This is not the current layer, nor is it 0 or Defpoints and I am fairly certain the Layer does not contain objects. As an interesting side note; when running Purge, the Purge zero-length geometry and empty text objects is grayed out. It's not an option.
View 9 Replies
View Related
Aug 19, 2009
how to remove this link from my template. I don't see the table in MS or PS. When I right-click on the link I get the message: "The data link is being used and cannot be deleted."
View 2 Replies
View Related
Jan 9, 2012
I have an assembly where I have deleted a component, but it is still linked to the assembly somehow. The part is no longer visible in the model, is missing from the model tree and from the BOM, but it still prompts to save. I have attached screenshots to show what i mean: The file (00017429.ipt) prompting to save, despite not actually being in the assembly (00052857), the parts-only BOM showing that the part is not in the BOM, and the vault tab with the part highlighted.
I don't believe this is vault related because Inventor is prompting to save the 'deleted' file, and pack-and-go also grabs the 'deleted' file.
For the example shown, it is a minor nuisance because it means an extra drawing gets printed when an assembly with this problem gets used. I have just had the same problem happen on another, much more complex assembly and it is causing me major grief.
Inventor Pro 2012 SP1 (Build 190) 64bit
Vault Pro 2012 SP1
View 3 Replies
View Related
Dec 13, 2011
Text style can’t be deleted!
Although, the text style “Simplexshx” (the file is attached) is neither used nor the current, but it can’t be deleted!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
May 31, 2012
Every time I purge my drawing several plot styles show to be deleted. I don't reconize them, one I see offten is called Invisible ink. I started to try to use it to see what its about. I can't seem to find the right track and use this plot style.
View 2 Replies
View Related
May 31, 2011
I was recently updating an assembly which contained a part that had been subsequently deleted from my folders. I skipped it while opening the assembly, then deleted the part in the Model Tree (and replaced it with a different component). So, to summarize, the assembly no longer has the part in the Tree, and the part does not exist anymore on my system. These parts and assemblies have not been Vaulted, so that should not be an issue either.
My problem is that every time I open the assembly, it wants me to resolve this deleted part, and I have to skip it every time just to proceed. Once the file is loaded, I get no other issues, no "red cross" items, just a question mark next to the file name at the top of the Tree indicating that the file needs to be resolved.
The old part is gone; I tried recreating it using the same file name, and using the same third-party SAT file from which it was originally generated, but Inventor detects that it's not the original part and won't accept it.
How to get past this "part resolution" issue?
Autodesk Product Design Suite Premium 2013
Inventor 2013 64-bit Edition
Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz
NVIDIA GeForce GTX 560 Ti
454 GB HD, Intel® ICH10R SATA AHCI Controller
SpaceNavigator, 3.14.2 / 6.14.0 / 3.18
View 6 Replies
View Related
Nov 28, 2013
i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 Replies
View Related
Oct 22, 2012
deleted some xref by mistake.
is there a way to restore deleted xref or block from the database?
View 9 Replies
View Related
Sep 28, 2013
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
View 4 Replies
View Related
