Civil 3d 2010
Our cursors are pausing for about 2-3 seconds when mousinging over a point, it seems like it is struggling with the rollovertip tooltip information. It doesn't happen on other objects, just points. If we turn rollover tooltips off there is no pause at all. But we really like the rollover tooltips and it would be a shame to have to disable a feature to be able to move around a drawing efficiently.
I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedI have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedI have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
I use this application to give me precise pixel color information by rolling my cursor over the area needing color info.In addition to this information, the window also displays dynamically the x and y pixel coordinates of my cursor. good for measuring pixel dimensions of an object. This feature has now disappeared. I've upgraded to Mountain Lion..Would that have eliminated this feature with Digital Color Meter? Is there any way of using the cursor to measure pixel dimensions between two points?
View 7 Replies View RelatedIn Curves, when you want to see the deepest blacks and whitest whites, you hold down Option while clicking and dragging the balck and white sliders – and the dragging doesn't allow accurate control. It's okay, but I would find it better if I could nudge the black and white sliders from the keyboard while seeing the effect on the image. Is that possible when using Curves as an adjustment layer?
View 12 Replies View RelatedI've been wanting to increase the tolerance that Illustrator has for grabbing anchor points. I don't want to have to be within two pixels or so to be able to highlight or grab an anchor point. I've tried upping the selection tolerance to 8 px and it hasn't appeared to do anything.
View 6 Replies View RelatedI have 2 drafters that are working on AutoCAD Map 2002 programs with Windows 7 64 Bit operating systems. When I started back in August I noticed something absolutely bizarre. I have not come across this before so I am now escalating it to you experts.
What is happening is that the drafter will be working on a DWG. They will save multiple times. Even exit the drawing and come back to it the next day. While in the drawing (on the server OR on their computer, doesn't matter) the drawings will occassionally lock up and get the blue wheel. Then it will simply shut down.
Here is the strange part. The drawing file is deleted from the folder. All save points and everything. Just gone. Sometimes a random save file will be created in the same folder. This has saved us a couple times. But more often than not it is simply gone.
I am trying to convince my VP that we need to upgrade our AutoCAD licenses on these 2 machines.
When I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
Specs:
Autocad Civil 3D 2011 (64 bit)
AMD Athlon(tm) 64 FX-62 Dual Core Processor
NVIDIA GeForce GTX 260 (Graphics Card)
8 gigs of DDR2 ram
Dual monitors
Windows 7 64 bit
The cursor (crosshair / mouse) flickers constantly when I am moving the mouse around inside the autocad work space. If I draw a line the flickering gets even worse and it starts to lag slightly. The computer meets all of the recommended requirements as far as I am aware.
The CPU never goes above 45% usage and the RAM never goes past 21% usage. So the computer does not seem to be overloaded especially just trying to draw a line. All the drivers are up-to-date. Is it possible there is some sort of compatibility issue going on here or something I am overlooking?
I am encountering a problem using AutoCAD Civil 3d 2012. When finishing a certain command and going back to the ribbon, my cursor does not want to go out of the modelspace. So i can't click any command in the ribbon, or in any other program outside of AutoCAD.
Even when pressing escape to stop a command, nothing changes. Using the viewcube solves this problem for one time. But every time I draw a line or even zooming, the problem comes back again.
The scene i am working on is relatively light , and i am still running into this , everytime i go to select a mesh nothing happens for what seems to be ages (4-6 seconds) and then the mesh becomes selected. then if i go to select another mesh , the same. This is really slowing down my artist flow and making the work become a chore.
View 7 Replies View RelatedI've seen this bug for several versions and it's still present even in 2014. After viewing a corridor section, doing an inquiry, then clicking the Close button to get back the corridor is not able to be selected. It's "invisible" to the cursor. The only way I've found to get back to normal is to zoom out a bit, do a regen all, then a save. That's the only way to get the cursor to select the corridor again short of restarting C3D.
I can't recall what version I first noticed it in, but I think it was 2011 or 2012.
EDIT: Forgot to say this doesn't happen every time. I can't pinpoint what changes between tries, though. Usually, once it happens and I do the previous steps I can select it for a while. Then the bug hits again and I have to do the steps again.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
am experiencing display problems with Civil 3d 2012 on my Hp Elitebook laptop, when i open surface properties and go to styles dropdown menu i get empty dialog but if i move mouse cursor out of the dialog they appeared the same issue appears on other dialogs. I installed c3d 2013 trial still i get same problem. I installed autodesk certified driver same problem.
View 7 Replies View RelatedIs there any way of determining your cursor position in plan when you are working in a profile or visa versa? I also work in 12d and as you move your cursor on an alignment or profile you can exactly see the position of the cursor in both layouts/views.
View 3 Replies View RelatedWhen you hold your cursor over a surface it will display a window with different surface elevations if there is a surface where your cursor is located.Is there a way to make it display all of the different surface elevations rather than just 6, because I have a few more surfaces that wont display their elevation. Or is there a way to set the order in which they show up? I can get to see what I want to see if I isolate the selected surfaces but sometimes it takes awhile to load up the corridors, etc..
View 2 Replies View RelatedI need to create an action to resize several hundred horizontal images. Each image must be sized to a specific width and then cropped to a specific height. When I crop the image, I need to adjust the cropping box to accommodate the image content. Then I will save the image as a new file.
How do I a create a pause in the action so I can position the crop manually before I save the image?
I've been trying to figure out if it's an object naming thing, or is there a way to not pause between loops?
View 3 Replies View RelatedUsing an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 Replies View RelatedI've a nwe camera Canon 5D Mark III and I've some problems with these file.
When I edit in Corel Video Studio X6 all videos play in the preview screen bad because It have some short pauses.
The videos do not work in a continuous way.
I bought more RAM and now I've 12gb. Also I work with other HD files, like GoPro Videos, and I dont have problems in the preview. Maybe the container of 5D Mark III videos?
I just upgraded my computer by doubleing the RAM to 4Gb. Now CorelDraw (12 on XP SP3) is lagging. Almost every time I switch tools, make a change, zoom in or out, or do anything, it sits there doing squat, totally unresponsive for about a minute (yes, I do my 60 seconds) or more, then suddenly catches up. This is an excedingly frustrating if not outright impossible way to work.
My project is at the stage where yes, I NEED Draw. I need it working. Quickly and effeciently. The way it was before the memmory capacity was Improved.
Since last week (4-19-2012) Our users have been expierencing cursor issues and freezes with Civil 3d 2012. Entering commands in the command line very slugish, pressing the shift key to select / de-select, trim, open osnap menu, ext.
We are running Win7pro6d bit quad core machines with 6gb ram, ATI FirePro V4800 (FireGL), Intel Xeon ES640 (2.67 ghz). AutoCAD Civil 3D(SP2) and all hotfixes installed.
This problem just started one week ago and It started with the cursor jumping all over the place when crossing objects. However; we now have very sluggish command line entry, 2 - 3 seconds after typing till it shows up, and cursors freezing when pressing the shift key for any reason.
I'm running Autocad 2013 Civil 3d, when I open a particular drawing the cursor turns to a circular shape as if it is downloading something, but it is actually not loading anything. This circular cursor does not let you do anything with the drawing, you just have to keep hitting esc until it gives you a fatal error message that says "FATAL ERROR: Cannot write to undo file (probably disk full)" and it kicks you out of autcad. How to get rid of this ciruclar cursor?
View 6 Replies View RelatedIn dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
I would like to create a best-fit arc from non-horizontal points.
I have tried to do a UCS from 3 of the points that will form the arc but everytime the best-fit arc is placed on the global grid horizontally.
How can I draw points in Civil 3d using GPS coordinates?
Is it any way to input the coordinates manually if i have only a few key points, and then superimpose my topography or other objects? or should I insert a data file to get the points first? How can I upload the data file from my GPS tool, and how to figure out in which format to insert it?
I would like to draw with using the GPS coordinates itself, NOT the northing and easting( X,Y,) is it possible?
I am a surveyor in a multi-disciplined office. There has been talk of working in 3d. I have had lots of issues with 3d line work on general projects
For example, when you bring all the points in at elevation, and draw lines between them, we have issues with line patterns and querying distances. How are others handling this, or is there a setting to turn off the z?
I am a surveyor who wants/needs to perform survey adjustments on our data and from what I can tell this will require us to use FBK files generated from our TDS RAW files. Easy enough, but I am running into problems during import because when our field crews shoot a bad point or need to fix a point code they will overwrite the "bad" point with the "fixed" one.
when I go to import the points via FBK apparently the system doesn't realize these points were overwritten and I get duplicate point errors. This in itself isn't that big a deal except that I am only given the option to ignore the duplicate point (no overwrite, renumber or anything) which leaves me with a bunch of bad points, bad codes, etc. Sifting through the fbk to find the problems has proven dificult and time consuming.
Is there any way around this problem? we can bring our RAW files into other software (Carlson Survey, Trimble Business Center specifically) and everything works fine but we would rather not use extra software just to do survey adjustments, which C3D seems apparently capable of.