AutoCad :: Deleted Xref Layers Appear In Host Drawing
Oct 10, 2013
I have a number of layout tabs with varying layer controls applied in multiple viewports. This layout may be made up of a number of xrefs. I end up with a lot of layers in the host drawing from the xrefs, and even after I purge the xrefs to eliminate some of the xrefs, the layers remain in the host drawing, even though they no longer exist.
Is there any way to update the xref definitions to get rid of the layers without losing the layer setups I have? VISRETAIN is set to 1, and if I reset it to 0, I will lose all of the viewport controls I have put in place.
View 6 Replies
ADVERTISEMENT
Feb 4, 2013
I usually attach an xref to my drawing as a workflow, but I neverreally understand why its so difficult to locate it after importing. The xref almost always comes far away from theinsertion point. I tried to open thexref and set new ucs at the corner of the geometry but its all the same.
How can I coordinate xref ucs to my host drawing ucs?
View 2 Replies
View Related
Aug 29, 2012
I use a building key for building reference (inserted as a xref into the individual drawings) in many of my drawings. I have layers for specific areas and rooms. I turn off the layers on the appropriate drawings (if the drawing is for room 301, I make sure all other layers are off and only 301 are on).
My problem come when I add a new layer to the key and since the key in xrefd into many drawings it shows up as always being on.
This makes to have to go back and do a little bit of layer control each time I change the xref.
VISRETAIN=1 only keeps the layers set to last save and everything added to the xrefs are basically taken from the xref (color, visibility, etc). Is there a way to set a variable so that you have to check the new xref layers before they show up on the referenced drawing?
View 2 Replies
View Related
Oct 22, 2012
deleted some xref by mistake.
is there a way to restore deleted xref or block from the database?
View 9 Replies
View Related
Jun 20, 2013
I currently working on a drawing which has previously been drawn by somebody else. I probably have 10 different layers within the drawing. However in my layer properties manager I have 37 all of which are turned on unlocked etc. When I try to purge theses layers are not deleted. Is there any reason why I can see theses layers and more importantly erase them?
View 5 Replies
View Related
May 25, 2012
Is there a way to "lock" layers so that they cannot be deleted or purged from a drawing?
I have a template with all titleblocks, layers, dim styles, and such, all set up. But since there are a small group of layers that are not actually used in the drawing or template they are "purgable" or "deletable". As far as I understand locking the layer locks the geometry to keep it from being edited so it will not work for what I am thinking.
View 9 Replies
View Related
Mar 20, 2012
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
View 5 Replies
View Related
Dec 3, 2013
I found a lisp in an old post and I edited it alittle with my own layers to have it change to but when I use it, it doesn't deleted the extra layers. It says layer cannot be deleted. Below is part of the code that I am using, I didn't copy all of them since there are alot of layers in the lisp that I added. maybe I copied something wrong I am not sure.
{code}
( defun c:FIXMYLAYERS ( / ss_newlayer change_en )
( setq layerlist ( list ( cons "ENB_ROW-1" "ENB-ROW-1" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB" "DefPoints" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB-LOGO" "DefPoints" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB-NPLT" "DefPoints" )
[Code]...
View 9 Replies
View Related
Aug 23, 2011
I deleted drawing1.dwg but every time I power up Autocad 2011 it keeps coming up. This drawing has a small square in the southeast corner of the screen. Why is this happening?
View 9 Replies
View Related
Dec 18, 2012
I have 2 drafters that are working on AutoCAD Map 2002 programs with Windows 7 64 Bit operating systems. When I started back in August I noticed something absolutely bizarre. I have not come across this before so I am now escalating it to you experts.
What is happening is that the drafter will be working on a DWG. They will save multiple times. Even exit the drawing and come back to it the next day. While in the drawing (on the server OR on their computer, doesn't matter) the drawings will occassionally lock up and get the blue wheel. Then it will simply shut down.
Here is the strange part. The drawing file is deleted from the folder. All save points and everything. Just gone. Sometimes a random save file will be created in the same folder. This has saved us a couple times. But more often than not it is simply gone.
I am trying to convince my VP that we need to upgrade our AutoCAD licenses on these 2 machines.
View 1 Replies
View Related
May 14, 2013
I got the below warning today for one of my AI files that I was working on yesterday. The file had several layers that had been worked on for a number of days. I know that I shut the application down correctly yesterday, but the warning states otherwise. I had another file open yesterday and it is fine. In this file, all of my layers, except for 4 incomplete layers are now gone! I had saved the document several times yesterday, but it is showing none of those saved changes. Is there a way that I can get my file back?
View 7 Replies
View Related
Nov 1, 2012
Ive been working on a piece of art for about a week when suddenly i was having some computer issues. I restart my computer and open up my gimp file and a file that previously had three layers now has one layer. The other layers where seemingly deleted, and i don't know why. Ive read another thread on here that was dealing with the same issue yet none of problems or solutions applied to my problem. This did happen one time before and all the layers were deleted, but i just started the project over again. The art i lost was being licensed, and I'm sort of freaking out.
View 1 Replies
View Related
Apr 26, 2013
I have been working on a layered PSD file putting together a website visual for a few weeks. Yesterday I went to save a copy of the document and in that process the file went a bit weird and some text changed colour and 5 layers had a portion of them deleted (all photos in the header area, like in the attached image). It's happened twice since yesterday, but can't seem to recreate it.
View 1 Replies
View Related
Jan 25, 2006
I have a revit file with an imported dwg object. I accidentally deleted all of its layers. How can I purge the object out of the revit file?
View 5 Replies
View Related
Mar 2, 2012
Lets say I have file 1 and files 2,3,4, file 1 contains several layers and is an xref in files 2,3,4.
Can I somehow set a layer to off or frozen in file 1 and it will make sure to be switched off in my files 2,3,4 aswell? I have played around with New VP Freeze but if I add a layer at a later time and files 2,3,4 already have several viewports that doesn't do me very good.
View 3 Replies
View Related
Jul 17, 2012
can you turn off XREF layers? i have a set of drawings and in certain layouts, i need to remove layers.
View 4 Replies
View Related
Oct 7, 2008
AutoCAD 2008.I have read numerous articles saying that AutoCAD has made this feature drawing specific as opposed to an overall setting. What this means is that every drawing you edit layers in a xref, you get pop ups stating that layers have changed. Especially annoying when you are publishing a set of drawings. Does any overall command to turn this nonsense off completely? Or a command that will reconcile the layers automatically without the pop up message?
Any way to just bind a raster image into an autocad drawing, without having it show up in the xref manager?
View 6 Replies
View Related
Oct 15, 2012
the dwg i have attached comes with 40+ layers and what appears each with a unique color!
during plotting of the main dwg, i want all the features in these layers simply to appear as a light-grey color.
is there some setting for overriding an xrefs layer properties? some sort of master-slave or children setting?
View 1 Replies
View Related
Nov 3, 2011
How to prevent the Xref layer name from prefix of Xref dwg name? For example If I have been using one layer name as BORDER in Master Dwg. Now I going to use Master dwg As a External Reference, thereafter The Above specified Layer name are coming as Master$0$BORDER, while i am using the Master Dwg As a Xref Dwg of my another dwg. Actually I want to remove highlighted text from layer name?
View 2 Replies
View Related
Apr 26, 2013
When you XREF a drawing from another file that file is brought in along with all of its layers. Personally I do not need these layers for my access is there anyway I can combine all these to eliminate the large quantity of layers in my file? Say by layer merging. And if I do will this affect the ability of the file to revise itself?
Explanation: What I am doing is taking a bunch of engineering drawings, XREF them into my file, then creating seperate viewports for each drawing referenced in. But the key is I need these files to adjust automatically when the engineers make changes (This is done through the XREF command from what I gathered from one of my previous posts).
View 8 Replies
View Related
Mar 25, 2012
Im having some problems with a file im working on. I have a file with an x-ref, when im in the model space i can see all layers i want to see, but in the viewports i created in the file i noticed that 2 layers(layers that i really need to see) dont show up. Ive checked the freeze/thaw, on/off, plot/no plot settings, layerstate, i tried creating a new layer in the x-ref file(the parent file) and putting these things that dont show in the new layer but nothing changes. I'll attach two images for the layer settings.
So, whats missing in the viewports is the cyan text where it says "Klassisk sal"and some other text surrounding it and the cyan box with the text "Mko 12.002". The highlighted layers in the layer properties window are the associated with these items
Viewport.jpg
here is the layout, the layout is active and again the two highlighted layers are the ones associated with the objects missing.
View 5 Replies
View Related
Mar 31, 2011
My company uses tons of Xrefs - wonderful, however problem comes when having to navigate through 100's of layers to get to the main drawings layers. So I tried using the layer filters to just show my main drawings layers. Here is the problem, I you can select show all layers, not good, can select just the xrefs (show all of them or show just one of them, etc...), or you can show just the used layers - I tried that, but when you create a new layer it is not included in that filter. I tried setting up a custom layer filter, however, I don't know how to right the name or what selection to make that would allow me to exclude a set of layers.
View 9 Replies
View Related
Nov 30, 2012
I've been experiencing an odd problem with Xref's lately in AutoCAD 2006LT. I noticed that some of the layers in my viewports are missing. I have unloaded the xref, purged the drawing and reloaded the xref and each time it comes back up missing the majority of the layers in the external reference. I've checked to make sure that there are no xref's associated with the xref file to ensure that it's not an issue with a sub xref as well. I have downloaded a trial copy of 2013 and it mentions unreconciled layers and shows all layers in the view ports. In my troubleshooting I've checked for frozen layers, layers turned off, the location of Xref'ed files, ensured that no xref’s are on frozen or turned off layers and several other possible problems.
What seems strange to me is that I can see a few layers but not all layers associated with the xref in AutoCAD 2006LT. I've also checked to make sure that the layers are not frozen in the viewport as well. I use that feature often and depend on it for the drawing that I do.
If I start a drawing from scratch or go back several generations I can see all the layers just fine. It only seems to affect the latest generation of this current projects files.
View 3 Replies
View Related
Jan 21, 2013
We have our pipe networks living in a master file that is XREF'd to our sheet files. Now, the pipe and structure objects are all the layer C-PNET. The style for the pipes is comprised of the layers C-STRM-PIPE (for pipe walls) and C-STRM-PIPE-PATT (for the center line that is the width of the pipe). When I go into the XREF I cannot freeze OR change the color of the layers comprising the pipe style even though they are all set to ByLayer in the style dialog. The only way to freeze the network is to freeze the layer the pipe network is on C-PNET. However, this presents other problems with our file setup and we dont want to universally freeze C-PNET.
why we cant freeze the portions of the pipe network that are defined in the style as being on C-STRM-PIPE, and C-STRM-PIPE-PATT? If so, how do we remedy this?
View 3 Replies
View Related
Jun 7, 2013
How not to carry some layers when i xref a file into another.
for example,
i have a base file with x-1,x-2,x-3 layers. when i xref the base file into a main file, i only want x-1 & x-3 layer to show up in the main file.
is there any way to control what layers can be see in xref with out using freeze/off commands.
View 8 Replies
View Related
Dec 4, 2013
have xrefs in drawing froze some of the xref layers, changed colors on some others looks great on screen, but all the original colors show on plot, along with the frozen layers...is this to do with the xref?
View 2 Replies
View Related
Sep 18, 2013
I made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.
View 9 Replies
View Related
Jun 3, 2012
For several releases Autocad's layer manager has shown only XREF layers in the layer manager by default. Open a drawing with Xrefs (nearly every drawing I have ever worked with) and to access the layers that are actually *in* the drawing, I must first open the layer manager, select the "Xref" filter, and check the Invert Filter box. Then I see the layers that would more logically be shown be default.
Does any way to change this so the non-Xref layers show up be default??? I am currently using Autocad Architecture 2012.
View 8 Replies
View Related
May 9, 2013
My problem is this; I have several production sets (Sheet Sheets) of drawings in which the referenced drawing's layers are not carrying over.
To clarify; In my base file file I went through and froze out and changed the color of several layers. When I reference that drawing into my sheet sets all of the layers are turned back on and set to the original colors. I should also note that the offending referenced drawing is also an xref. It is a large architectural drawing with several dozen nested xrefs refernced into a base file in which I have inserted blocks and symbols.
I've tried different VISRETAIN settings and other options. Nothing seems to work. I've also went through various forums and tutorials to try and solve the problem before I posted here. I'm at my wits end!
View 0 Replies
View Related
Sep 28, 2012
I am working on my xref file and all of a sudden in my layer properties, all of my layers are missing. It's as if they are still there but invisible, I put my cursor over them and a box comes up with the layer, but I still can not see it or modify it.
View 1 Replies
View Related
Jul 15, 2013
A question about ex referencing. Can it be done within a drawing. In other words, can I can Xref the plan to another part of model space to then create the elevations in UCS, and then Exref the elevations from USC to a horizontal line.
This would be very useful in the sketch plan stage.
View 9 Replies
View Related
