AutoCAD LT :: 2007 On Windows 7 / Unable To Modify PGP Files
Dec 12, 2011
I've recently installed AutoCAD LT 2007 on a new computer running Windws 7 64 bit. I've been able to modify/customize everything except my .pgp files.
I've found them under C:/Program Files (x86)/AutoCAD LT 2007/User Data Cache/Support/acadlt. Once I've gone through and made my changes, and attempt to "X" out of the dialog box, I'm prompted to "Save" changes. I choose "Save" and am then told the "acadlt.pgp already exists. Would you like to replace it?". I select "Yes", and am then told "Access Denied"...with none of my changes being saved.
I've learned about an "unsanctioned" workaround...running a "run as XP" patch, but I'm having trouble finding out details/feasability of this solution. Additionally, I'm curious if I go this route, will all my programs now run as if on XP?
Configuring plotter/printer on newly upgraded laptop using Autocad LT 2007 with Win7. The printers that are re-installed are not available under that program.
Coworker is setting up a new Win7 (64bit) machine but we don't have the ability to upgrade CAD at this time. So running AutoCAD Mechanical 2007. (Yes we know they don't always play nice) Two other workstations here are running the same OS & CAD and print without issues. This new machine AutoCAD does not see any system printers. Have made sure the "Hide System Printers" is not checked under options. I can add a plotter file for each system printer and that workaround is OK, but why this one machine can't see the system printers. They are Xerox workstations on the network - not local. We have already restarted AutoCAD and restarted the PC.
I have one workstation running Autocad LT 2007 on a windows 7 32 bit OS, and needs to print to a non plot printer, which is a Kyocera KM-4050 KX. I am unable to print to this printer through Autocad LT 2007 and recieve the following error message . . .
"\ServerNamePrinterName: This plotter configuration conanot be used for one of these reasons: The driver cannot be found, the device can not be found, or the driver has a problem. The None plot device has been substituted."
The Printer works fine with all other applications, and the rest of the users who have Autocad LT 2011 have no issue printing.
I followed the instructions in [URL] ..... and did not see my printer model in the list and was unable to load the driver from a disk.I believe the file it was looking for was .hif, which could not be found.
I also uninstalled and reinstalled the printer driver, and did some testing, so the printer works fine except for this application. According to the user the print function never worked for them in Autocad LT 2007.
All working OK until 8 days ago, then bridge just disappeared completely. Looked like it had opened but would disappear when I clicked on the icon. Re-installed, Bride now visible but unable to view .CR2 files in camera RAW or in Photoshop, comes up as "unable to open".
Have tried to install the 5.7 camera raw update, extract files, click on application, then Photoshop opens and advises "invalid file type". Not sure what to do now and have a large number of wedding files slowly building up .
I have simple 3 column 4 row table I copied from another drawing and am tying to revise the text in the cells and can't. Text is entered into the cell but is on top of the existing text from the copied table. It also appears as though I can't delete the existing text either. I have checked the cell locking option and the cell is "unlocked" I thought this had something to do with the issue but apparently not.
My place of work recently changed from Autocad 2007 to Autocad 2013 (big jump.. i know), when we try to plot old drawings the .ctb files that were used in 2007 now says missing beside it. We also only have a few options in regards to .ctb files, whereas in older versions we had hundreds to choose from. Any function to get our old .ctb files back or where to download them?
I am having a problem in an elevation view where the surface hatch covers the windows after I apply a Modify Roofline command in the construct.
When I look at the elevation in an isometric view you can see the surface hatch go through the windows. When I refresh the elevations after the construct xref is reloaded after Modify Roofline command the windows are no longer visible.
If I reset the modify roofline command in the construct, reload the xref in the elevation the elevation returns to normal.
I'd like to figure out why after the modify roofline command the windows are covered in the elevation but not in the construct view.
I've just started working on a frame generator assembly I was modelling earlier this year; I can't seem to modify the base 3D sketch. The feature which looks like the original 3D sketch is now called the "Reference Skeleton" and I am unable to modify it at all.
I am working on a copy of the original part as I "save as" the whole master assembly when I was last working on the model. I don't know if this would have effected anything.
I have a base human CAT and have attached it to a node that is constrained to a spline. I have a 300 frame animation and have 300 set for the end of the CatMotion Range.
Under 'Stride Parameters' no matter what settings I use for 'Max Step Time' and 'Max Stride Length' I always have a 'Velocity' of .842 as it never changes. I'm trying to get a really slow walk of about one step per second.
I set my stride length of a comfortable distance so it doesn't look like the rig is taking too long of a step and then I drive my 'Max Step Time' up to try to slow things down but it doesn't change anything. I'm obviously overlooking something.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard, Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram, Quadro 4000 Display Adapter
I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
am using PhotoShop for web development but mostly for digital photo manipulation.
I have found a couple of PNG files that I thought would transparent but were not. How can I transform an existing png file that has been used to modify the boarder of pictures for rough edges..... The png file is not transparent and has a lot of internal noise/distortion that keeps the "magic wand tool from being able to clear out the middle are in one fail swoop?
This script is supposed to open, modify, save, and close all files within a chosen folder.
There are a couple problems with the script The files are "legacy" .eps and .ai, so a save dialog pops up. I want to save the file and move on, suppressing dialogs if possibleOnly the first file is opened If I comment out the line inside the for loop that runs the convertToUncoated() function, all of the files will open. If there is a way to upload the test files I'll gladly do that.
I am using Coreldraw but in the past I have been able to create the following Macro to do the following
(1) open a file called C:ArtworkC67PSML.cdr (2) change the text in one field from "Recorded in Ireland" to "Recorded in China" (3) remove all guideline fields (4) export the cdr to pdf format and save as new file C:Artwork2C67PSML.pdf
But I would very much like to be able to run the macro on all CDR files in the c:/Artwork folder, how I could amend my code (shown below) to do this ?
Sub Rings() Dim doc1 As Document Set doc1 = OpenDocument("C:ArtworkC67PSML.cdr") Call TextTranslate ActivePage.Layers("Guidelines").Editable = True ActivePage.Layers("Guidelines").Shapes.All.CreateSelection ActiveSelection.Delete ActivePage.Layers("Guidelines").Activate [Code] ......
I have PSE 10. I'm trying to change a layout to customize my output. I'm the admin but I get the following error when trying to save a change. "You don't have permission to save in this location. Contact your admin for permission". I checked the file properties and the only box not checked is the special permissions which is grayed out. I see info saying this is how you modify the layouts but not sure why mine isn't accepting.
I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
I installed the 30-day trial version of VideoStudio Pro X5 (VSX5_Pro_TBYB.exe (1 431 816 336 bytes) from [URL] on my new Windows 8 laptop. Everything seemed to work fine until i started to experience problems with "hanging splash screen" during start-up. To solve this, I uninstalled VS Pro X5. Now, I am not able to re-install the software.
The installation seems to work OK until the EUL-screen. When checking "I accept the terms...", and pressing the Next-button, nothing happens.
I've tried (with no luck):
* Manually uninstalling/removing according to this
* Created a local new user and tried to install X5 on this
* Checking "zombie" security issues according to this
I recently performed a "Windows Restore" operation on my Compaq. Now whenever I launch Photoshop CS2, I get a message saying this (to effect):"The required user name and licence key have been lost, and this program must close."Right after displaying that message in a dialog box, Photoshop closes--giving me no opportunity to insert my license key. How do I get my license key inserted and Photoshop working normally again?
Unable to print document on windows CS6.6..Not enough memory was available or an object was too complex. Reducing the size of this document window may work. Document was created on mac book pro CS 16.2.1.
I was able to successfully download and install the trial version of PS Elements 11 on 64 bit Windows 7. However, trying to open the program doesn't result in any error, it just won't launch. Even after rebooting I am not able to launch the program. My PS Elements 8 is still working fine.
When I try to make LR the default program for these files (left-clicking> set default program> browse> select LR), it is like it doesn't go through. LR still does not show up as the default program. I have been using LR for awhile now and loved it until this odd glitch. Is there a way to uninstall the last update?
After Upgrading from windows 7 to windows 8 photos are not displayed in Photoshop CS6. When I open a photo in the bridge, it is displayed properly in Camera Raw and can be developed there.
After opening the photo in Photoshop 6 then, everything looks good, but the photo is not visible. I can save it and even export it (to jpeg for example), but it is not visible.
I get file-tiff-save.exe & file-tiff-load.exe Application Error when opening Gimp 2.8.2 in windows 7 64-bit.The error: The application was unable to start correctly (0xc000007b).
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
I can not select the walls and windows on the floor plan, but can select everything else like the dim,text, section marks, etc.
I also can choose the walls of the first floor, if they are used as the underlay of the second floor. However, when I am in the first floor plan view, I can not.
I have CS5 and began a file yesterday only to have multiple problems today when I tried to open it. First it said,
"File is not readable"
Yet when I opened it on my schools computer it was able to open. Then my other file did open but when I tried to save it it said,
"When spot colors are used with transparency,changing them to process colors outside of illustrator can generate unexpected results."
Then when I cancelled that it began to read,
"Saving to a legacy format may cause some changes to your text layout and disable some editing features when the document is read back in"
I don't really understand how I could fix this issue because obviously its the file inside. Now I did have a lot of imaged in the file that I made in photoshop where I took away the background, made it transparent then saved as a png. Is that the issue? Most of my images on the file are .png and were edited with photoshop.
Set Outlook as Default, but still it won't go. Then tried the Adobe Email service, but it won't send verification email. I"ve have uninstalled and reinstalled PSE11 - did not change. This should not be difficult.
