Photoshop :: Unable To View Camera RAW Files On Windows 7 And CS4
Sep 16, 2012
All working OK until 8 days ago, then bridge just disappeared completely. Looked like it had opened but would disappear when I clicked on the icon. Re-installed, Bride now visible but unable to view .CR2 files in camera RAW or in Photoshop, comes up as "unable to open".
Have tried to install the 5.7 camera raw update, extract files, click on application, then Photoshop opens and advises "invalid file type". Not sure what to do now and have a large number of wedding files slowly building up .
View 4 Replies
ADVERTISEMENT
May 22, 2013
When I try to import photos from a camera or files I get this message The ODBC data source reported the following error: (internal error;data not found)
Why am I getting the error message and is there another way to import?
View 1 Replies
View Related
Nov 7, 2013
I cannot open new files from Photoshop CS6.
I have to go outside of the program and open them by dragging the file onto the dock icon. This means I cannot open any of my digital camera files (transferred into Nikon Transfer into "Pictures") from the program. So, I have to go 'outside' of PS, and then back in – and this eats up a good deal of time, and this latest version isn't as quick as it used to be.
Sometimes, it won't even let me open a file I'd worked on only a few hours before. Again, I can open them 'outside' PS, but I keep getting this error when I try to access them from via command-O:
"Could not complete your request because of a program error."
I've reset the defaults twice. Fresh operating system. Clean user account.
View 5 Replies
View Related
Aug 21, 2013
I'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
View 2 Replies
View Related
Sep 18, 2012
I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3.
I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround
View 3 Replies
View Related
Aug 21, 2012
I have a new Canont41 and I can't sign on to elements org
View 5 Replies
View Related
May 26, 2012
Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade available on the site but 6.7 upgrade.
View 3 Replies
View Related
Aug 6, 2013
I dont want to update to cs 6 but my raw files wont open with cs5 and also I dont want to use dng converter slowes everything down, what should i do.
View 3 Replies
View Related
Jan 15, 2013
Video playback of camera videos is very choppy on older computers, AKA my computer. I know if I disable audio I can get smoother playback )although slow motion. Is there anyway to view camera MOV files in real time on an older computer.
View 5 Replies
View Related
Nov 2, 2013
Had to reload elements 7 after disk crash. Restored from backups. Unable to view or edit files with extension cr2
View 1 Replies
View Related
Dec 12, 2011
I've recently installed AutoCAD LT 2007 on a new computer running Windws 7 64 bit. I've been able to modify/customize everything except my .pgp files.
I've found them under C:/Program Files (x86)/AutoCAD LT 2007/User Data Cache/Support/acadlt. Once I've gone through and made my changes, and attempt to "X" out of the dialog box, I'm prompted to "Save" changes. I choose "Save" and am then told the "acadlt.pgp already exists. Would you like to replace it?". I select "Yes", and am then told "Access Denied"...with none of my changes being saved.
I've learned about an "unsanctioned" workaround...running a "run as XP" patch, but I'm having trouble finding out details/feasability of this solution. Additionally, I'm curious if I go this route, will all my programs now run as if on XP?
View 7 Replies
View Related
Nov 22, 2010
I just installed Ulead VideoStudio 10 on Windows 7 and am having problem viewing .avi files even the sample ones with the installation, also the audio is not working. everything works fine on Windows XP. Is there a patch or Ulead VideoStudio 10 is not compatible with Windows 7?
View 3 Replies
View Related
Mar 23, 2013
I have lightroom 3.6. I just purchaesed a SDony alpha A99 camera and I am unable to view raw files in lightroom. What can be done
View 1 Replies
View Related
Mar 20, 2013
Lr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
When will this camera be supported?
View 5 Replies
View Related
Sep 4, 2012
Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
View 2 Replies
View Related
Jul 10, 2012
leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies
View Related
Sep 23, 2013
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
View 3 Replies
View Related
Oct 9, 2013
I am trying to update to Camera Raw 6.7.1 in CS5. I downloaded form this link:
[URL].........
However, after download and unzip the folder says it is the update for version 7.1 which will not work for CS5. Need a link to download the update to version 6.7.1.
View 2 Replies
View Related
Oct 26, 2013
i have ps cs5 ,but i have just bought a nikon d5200 and i can not view my photos from this camera.
View 4 Replies
View Related
Jul 31, 2013
When I go to open a CRW Image in CS5,Bridge It will not open.It says Could not complete your request because it is not the right kind of document.
PS How do I tell what version of Camera Raw I have.By the way I have a Canon EOS 10D camera.
View 4 Replies
View Related
Sep 5, 2012
While I'm in ps cs5 and have converted a layer to a smart object, when I click/double click on the layer or the icon it will not open into camera raw. I have tried this with jpgs, tiffs and psd files, I have no other problems with raw, bridge of Photoshop. I have also downloaded the latest patch from Adobe.
View 5 Replies
View Related
Jun 20, 2012
I am using Photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge. I download all the Camera Raw file ready, but still not working..I open my CS 5 Extended and open with the CR2 file, it pop out "Could Not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera Raw,
I current using Canon 600D .
View 4 Replies
View Related
Jul 10, 2012
I am using a nikon 5100 dslr camera and I have the correct leads and I am using photoshop cs5.
View 2 Replies
View Related
May 15, 2005
Was just trying to view pictures from my camera in Bridge and more than half of them in this one directory aren't showing thumbnails or EXIF data, just the CR2 icon and incorrect creation date and time (they were all shot the same day, most within minutes of each other, yet they're a week off). If I double click on the icon, the image opens up correctly in the CR2 plug-in. They worked before, I've opened and closed Bridge and PS, I've purged the cache, but it's still not working.
View 9 Replies
View Related
Oct 31, 2013
At first, I wasn't able to open .nef files from my Nikon D800E. I then realized that I needed to update my camera raw installers. The available versions were 6.5, 6.6, and 6.7 from the adobe website. I also downloaded the Adobe App Manager as it was required to install the updates. The downloading process for all 3 versions worked fine. However, when I tried to install using the adobepatchinstaller, it didn't work. And I tried on all version individually. They all gave me the same message: not the right patch.
View 10 Replies
View Related
Apr 7, 2013
I am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have. The camera is a fairly recent model.
View 6 Replies
View Related
Dec 24, 2012
unable to load photos into PSE 6 (Mac) from camera or HD.
View 1 Replies
View Related
Sep 26, 2012
I'm having an issue trying to move the camera view in cs6 extended using a 3d Layer. Here's the idea:
1. Create a 3D Layer extrusion / mesh primitive.
2. I select the current view item in 3D Panel / click outside model.
3. The border frame appears yellow.
4. When I select the Move tool, I can only rotate around the y axis, can't rotate up or down. Can't roll the camera, move or slide either using the other move tool modes.
5. I can adjust the co-ordinates properties for the current view and it works OK.
6. Object /light transforms work OK.
I'm testing on 13.0.1, mac 10.7.4. I had the same problem on another machine on 10.6.8 on v 13.0 last week that fixed itself, but not sure how .
View 5 Replies
View Related
Sep 26, 2013
Just trying to work out how to have one camera affect the view of all the 3D layers in my scene. If I have a layer selected, and adjust the camera, it only affects that layer.
View 1 Replies
View Related
Aug 30, 2012
I cannot upload pictures from my camera, Canon 7D, into Pnotoshop 10. I recently had Photoshop 7 and had no problems. I do seem to be able to upload pics from a thumbdrive.
View 3 Replies
View Related
Jun 26, 2013
New Trial user and unable to import Raw file and unable to download camera raw plug-in.
View 21 Replies
View Related
