is it possible to render an animation in realistic view with Raytracing switched on?
In the view i have a realistic view, but when i do "render animation" the pictures are rendered without Raytrace.
I am trying to render animations and I am still getting the "Undo file size exceeded" message in the middle of my animation. I have tried every option I could find to get it to stop but it keeps happening. Some of the animations take over an hour and I don't want to sit in front of the computer waiting to click ok to increase the file size.
I've maxed out the size in the settings at 4096K but it still gives me the message at 2048 and 3072.
So I've been using ray the realistic view with ray tracing enabled for a while now for quick renders, but I recently had to reinstall Windows and now it wont work. I've installed all of my drivers and everything is up to date, but when I click on ray tracing it starts to do it for a couple of seconds then just disables. After that first try whenever I click the button it simply wont enable.
View 9 Replies View RelatedI recently updated to Inventor Professional 2014.
The problem I encounter is that Inventor crashes sometimes when I turn the realistic view mode on.
Also the rendering in realistic view mode is much slower than with Inventor 2013.
Are there some ray tracing options that I need to set up?
I have been designing a school project for the last 2 months using the student version of inventor 2014. The realistic views have been working the whole time before but now it is not working. I click on it, and it just switches back to shaded view. If I click on shadows, or reflections I get the following message.
"One or more visual effects in use are not supported by the current system graphics hardware. We strongly recommend running the Diagnostics check in applications option for detailed information.Would you like to run hardware Diagnostics now?"
After selecting Yes I get the following,The graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Click the OK button to place diagnostic information on the clipboard.
I hit OK and everything closes. This is left on my clipboard.
This graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Inventor Version:
Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
64-Bit Edition - 8192.00 GB
Loaded Inventor Add-Ins:
Assembly Bonus Tools
Simulation: Dynamic Simulation
Simulation: Frame Analysis
iCopy
System Information:
Operating System: Windows 7 Enterprise 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro10,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (8 CPUs), ~2.6GHz
System Memory: 16384MB RAM
Page File: 1787MB used, 30791MB available
DirectX Version: DirectX 11
DxDiag Version: 6.01.7600.16385
Inventor Hardware Library Information:
HW Library Version = $Revision: #1 $
HW Library Date = $DateTime: 2013/01/15 11:05:45 $
Windows 7
Original driver information:
Graphics HW Vendor Supported for Autodesk Inventor: False
rating 0, optimization level 3
Optimization Level = 0
Options = 0
Warning Options = 0
[code]....
I am trying to make my render look realistic, like a photo and am having some trouble finding the write settings to play with.
I think you just need to use the render setup, lighting and environment & effects. Please see what I used bellow. what settings I have over used, under used or not used to achieve a realistic looking image.
- Some textures need to be fixed, but I am having trouble with the leather. I have used the A&D leather template with mid level reflections, high samples, A/O and a bumb. Also a light and dark texture in the diffuse slot with (Ambient/Reflective Occlusion)
Used settings:
- Photometric Lights
- mental ray
- FG - medium
- 5 bounces
- Noise filtering High
- GI mulitplier and photons per sample up
- max num. photons per sample few 1000
- Average GI photons per light up a few 1000
- Decay
- render elements:
- Global tuning all around 2
- mitchell
- Contours
- displacement sudiv max
- Effects - brightness and contrast
- mr photographic exposure control
- with preset, photographic exposure, image control
I working for a long days on modelling of house exterior while going to rendering and lighting i want realistic exterior rendering
3D Studio Max 2009 to 2013 64-bit,
Intel G35 chipset, Core 2 Quad Q6600 @ 2.4GHz,
4 GB DDR2 RAM,
EVGA Geforce GTX 550 Ti 2 GB (Driver 295.73),
Windows 7 Ultimate 64-bit,
[URL]
I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies View RelatedIs there a way to get rid of lines in realistic 3d view. I want it to look smooth.
View 5 Replies View RelatedWhy am i seeing all black when i rendered my southwest or southeast view, without setting up a camera. But other ppl of my peeps r seeing in colour and materails. Also, my other problem is when i put on realistic view, i m seeing grey-ish blocks instead of "real" materials. In my previous assignment, I did see the "Real" materials when i set it on realistic view. However i did try to reset to default for my realistic veiw, but still it did not seem to be working.
View 2 Replies View RelatedWhen I have full shadows on (vsshadows=2) in realistic view the shadow edges show up jagged. They look OK when rendered though. what setting I need to set to fix it?
View 1 Replies View RelatedI have found a 3D drawing on the internet. But i want to print it in a realistic view from the top. This is the place where i have found it :
Site
like you see on the site ,an example of the 3d cad drawing
in realistic colors,shadows, ... :
10-22022012-089645L.gif
but when i download the 3d autocad file i open it , and i can only print in this view:
3d cad print.jpg
no realistic view,
now is my question, is it possible to download the drawing from the site ,and print it in a realistic view ?
I need a few animations on one page but want them to load when scrolled into view.
View 3 Replies View RelatedI'm using the Ditch subassembly in my corridor and am running into a problem when using realistic mode to view.
I've applied a render material to L3, L2 and L4 which is fine but when I assign a material to L1-L5 (i.e Top) it overdraws (or otherwise fails to display) the previously assigned materials for L2, L3 and L4.
If I set the Links L1-L5 (i.e. Top) to no display then L2, L3 and L4 display as expected but when IMX'd to Infraworks the existing terrain shows through at Links L1 and L5.
Is it possible to stop this from happening and have a seperate material for L1 and L5 whilst retaining L2,L3 & L5 materials?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
'Rendering' from Front View window:
I am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedI imported trees using Civil View which are images projected on planes. I was wondering if its possible to get the shadows more realistic? It currently displays the plane shadows which are 2 planes crossed in the shape of an "X". I also noticed on others' systems their tree objects are more 3d and not images draped on planes. Is this due to graphics card?
View 1 Replies View RelatedI would like to animate and render a 30 second video of something similar to the attached assembly. I have been using Inventor Studio to apply animations to the components, render them as full frame AVI (800 MB files), and compress them with Sony Vegas Pro free trial (~120 MB).
The attached assembly is a simplified example and took me around three hours to model, constraints, animate, and render from scratch. Normally, the boxes are constantly starting and stopping and moving at different velocities. Defining distances and times is cumbersome especially since I need to be aware of the boxes' positions relative to each other so they do not appear to move at different speeds or overlap.
I think a solid modeling program might not be the best tool to animate loose components sitting on a conveyor belt. Inventor slows down and occasionally crashes when I get up to 40 or 50 boxes stopping and starting and moving at different velocities. I am inclined to think that 10 or 15 animated conveyor belts moving boxes with a coefficient of friction would be near impossible on my machine (modeling the belts similar to a track on a tank or a chain and sprocket, also constantly starting and stopping and moving at different velocities).
I haven't played with Showcase, 3ds Max Design, or Navisworks Simulate. Would it be worthwhile to try any of these to animate and generate videos?
I have prepared an animation which is 50 seconds long. Now, i just want to render that animation, but i couldn't.
The problem is that if i select "Entire Animation" option for the time range, and click the "Render" button, i obtain just an image rendered (1 frame) and if i try to write the time range manually by selecting the "Specified Time Range" option, i've realized that it is not allowed to specify a value greater than 30 secs. When i write "30.1" for instance, the forecolor of the input box turns red, and a message appears if i click the "Render" button, saying "Invalid Expression!"
"Help" says, "You can adjust any value in the input box.", however.
I've solved the problem by making two seperate animations and merging them by using an other video editing software, but i didn't satisfy the topic. Is there a limitation due to "something" or am i doing something wrong?
i ve noticed that when i switch to orthographic view i cannot render the view. i have only black render output. how to make a render in say top view or front?
View 1 Replies View RelatedWas wondering if there are some ways in converting a highly realistic rendering of an object generated in a 3D program into a more illustrative, simplified, alittle less realistic version in Photoshop?
The object has plenty of silver reflections, HDRI environment map reflections, precise shadows and highlights, etc. I just want to make it look more generic and not as polished I guess.
Are there filters or plugins that will do this in a plug in play method or is it more prodedural and manual?
I'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
Using Inventor 2012, up to date on patches, realistic style (which I could use two days ago) is no longer selectable. Also when I go to the Style and Standard Editor, the Realist Appearance section has the warning triangle with the message, "Autodesk Material Library is not available".
View 1 Replies View RelatedI am using Windows 7 Pro (64-Bit) with Autodesk Inv 2011 (64-Bit).
I normally use this feature: "Realistic Appearance" and changing the material. However, when I accept (Clicked OK), the application crashed on me!
Please take a look at the error and the image...
Problem signature:
Problem Event Name: APPCRASH
Application Name: Inventor.exe
Application Version: 15.1.0.28200
Application Timestamp: 4c5b0492
Fault Module Name: ntdll.dll
[Code] ....
How do I get my part to be transparent in the "Realistic" view like it is with the"Shaded with edges"? This is what it looks like with the view style set to "Shaded with Edges". Notice how it is transparent and you can see thru the part.
Now when I switch to "Realistic", I get this. Anything that is behind this part is not visible.
I want to be able to see thru the part when in the reallistic visual style.
I get the following error when I try to launch Fusion from within Inventor (or on it's own):
The application is unavailable. There was an error while initializing the graphics subsystem. This is likely due to one or more of the following: your graphics driver is not configured for "True Color", there was a problem installing the application, the application installation was damaged, or some other problem with the graphics hardware and drivers or the configuration of the application. More detailed information may be included below.
Also, when I try to switch to Realistic Visual Style, it will not allow me to. When I go into Application Options, Hardware, and try to set it for Quality it always goes back to Compatibility.
When doing presentations I always use Realistic. However today I turned on my machine and wanted to choose this visual style but I can't. I have tried playing around with the options>Hardawre>Quality instead of my regular Performance.
See attached for my Hardware Diagnostic
LR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies View RelatedThe standard black color in Inventor appears as if it has a subtle texture when I use Realistic shading mode (see image). But when I edit the style there is no Use texture Image or Bump / file associated with it. I tried Realistic Appearance checked on & off in edit dialog & it makes no difference.
I want to represent a flat anodized black color for some marketing images. We have a lot of parts that use the standard black color & I really don't want to spend the time to change them all to a new custom black color (without a texture).
How can I make the standard black not have a texture in realistic & rendered modes?
I need a fresh way to render masses of trees in plan view.
View 2 Replies View RelatedI've been tethering to Capture One with a Phase Back then having Lightroom Autoimport the files which works well. The biggest problem I have is that when I want to check focus as I go along and I zoom in on the files in loupe view Lightroom is really slow at rendering up the image. It seems to get slower as the catalogue fills up until it just wont do it. Then if I quit Lightroom and restart its better for a while then slows down again.
Both applications are running on the same Macbook Pro with The latest OSX.
However looking through the files in Capture One they zoom up in size with hardly any delay. I understand that Lightroom has to render a larger preview which is taking the time but surely Capture One has to do this too but doesn't seem to need to take anywhere near as much time to do it. In the case of Capture One it seems to be able to zoom into files that it hasn't previously loaded so there must not be a pre existing preview there.