AutoCAD Inventor :: Air Flow In Aircraft Engine?

Sep 11, 2013

I want to animate air flow in aircraft engine (see the file attached. It was captured from [URL]). Is that possible to create such animation it in Inventor? If cannot, what software can do that?

View 4 Replies


ADVERTISEMENT

3ds Max :: Create Jet Engine Blast On Aircraft Following Arch Path

Sep 18, 2013

I am attempting to create a jet engine blast on an aircraft which is following a arch path.  The super spray rotates into an arch when parented to the aircraft in lieu of spraying straight out of the engine that it is attached to.

View 7 Replies View Related

AutoCAD Inventor :: Modelling An Aircraft Nose?

Feb 6, 2012

I have to create a hollow model of an aircraft.  Most of it is reasonably straight forward, however, I am having real problems modelling the nose and cockpit area due to the inconsistency of the shape from the cabin towards the nose of the aircraft.  

View 5 Replies View Related

AutoCAD Inventor :: Create Aircraft Pilot Tube

Apr 17, 2013

I was trying to create Aircraft pilot tube using inventor and got the problem of internal tube designing in the connector section. Please see the attached files.

I am having problem designing the internal part of the end connector section where the internal tube  from the probe goes up bends and connects to a tube with end connector via an accumulator. (as shown in the  picture attached - Pitot.tube_abnormal.procedures-1_A300-600_Prunep.55)

View 3 Replies View Related

AutoCAD Civil 3D :: Flow Segment Label Using Total Flow Type Travel Time For Each Segment

Nov 27, 2012

Flow segment label using total Flow Type travel time for each segment:

C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....

View 4 Replies View Related

AutoCAD Inventor :: Engine To Create Assembly Animation

Mar 3, 2012

I am looking for a model of an engine to create an assembly animation. I do not need any specific details, just a working model with all of the parts neccessary.

View 9 Replies View Related

AutoCAD Inventor :: Engine Assembly - Crank Shaft Turns Different Direction?

Apr 27, 2012

I create a engine assembly and used "Drive Constrain" to rotate the crank shaft. The animation shows the crank shaft turns continuously in one direction. However, when I animate the constrain in Inventor Studio, the crank shaft turned in two different directions (see the vide file attached).

May I know why the crank shaft turns different direction?

View 9 Replies View Related

AutoCAD Inventor :: How To Animate Conveyor Flow

Aug 22, 2012

Im a new user of Autodesk Inventor, working in a semi automation company, supplying conveyors and other related customized equipment. how to animate conveyor flow. attached is my file. a box and a conveyor line with straight, curve and spiral path. by self study I learned a lot of animation but this time I'm having problem because it's a combination of curve and spiral

View 3 Replies View Related

AutoCAD Inventor :: Animating Fluid Flow

Sep 27, 2013

I made an animation of a small prototype engine I am designing (attached as video 3) and I would like to be able to show fluid flowing in from the injector and into the cylinder, through the dumbbell valve and out the bottom, autodesk inventor does not seem to have this capability and its looking like my only option is to learn 3ds max and rebuild my animation in that.

View 7 Replies View Related

AutoCAD Inventor :: Showing Flow Of Gas In A Cylinder?

Nov 11, 2013

I have attached a zip file of the engine assembly and its components, I couldn't attach one component because it's too big so I hope everything will still work without it, I'm hoping to show gas flow starting at the injector, into the cylinder, through the dumbell valve on the piston and out the bottom of the cylinder, if there is any way to do it in autodesk I'm willing to try as I just don't have a good enough grasp of 3dsMax yet.

View 1 Replies View Related

AutoCAD Inventor :: Multi Sheet IDWs And Work Flow

Apr 26, 2012

we have simple assemblies with bolted weldments and few misc. parts. most assemblies are 3-20 parts a typical project would have:

-a few laser cut parts, some plastic and hardware. these items need to have part drawings sent to a vendor. 

-some in house cretaed parts that need a drawing

-assembly drawing for our shop

i think i am seeing that by having one single  IDW its getting hard to send all the drawings to the people that need them. an example would be if a vendor calls about one part, i may send him a 4 page PDF and tell him to look on sheet 2.the other issue that i have is that my standard work flow is:

-design a product

-hand of to another dept for them to enter SKU numbers for parts and assemblies.

so my file names never match what the final product name is. i have been using fields in the iPROP, but it would be nice to revise file names when SKUs are created. im guessing vault would be the tool for something like that? 

View 3 Replies View Related

AutoCAD Inventor :: Creating Water Flow From Tank To Pipe?

Dec 28, 2013

how to create water flow inside inventor , i have a tank i want to fill with water & water then will flow through a pipe of certain diameter & length

View 1 Replies View Related

AutoCAD Inventor :: Work Flow To Create A Blank With Additional Material

Dec 11, 2013

We have a waterjet and machine shop at my place of employment, and currently my work flow is to draw the parts. Then for parts that need material left for machining I create a new part and using the derive tool I place my base part which I then apply extrusions to fill the holes and use thicken to add material to the surfaces that need machining.

View 4 Replies View Related

AutoCAD 2010 :: Generate A 3D Model Of Aircraft?

May 11, 2012

i need to generate a 3D model of an aircraft from point clouds in CAD but i dont know how to start with autocad.

View 1 Replies View Related

AutoCAD Inventor :: Create Surface In Assembly In Order To Measure Flow Area

Jan 28, 2013

How to create a revolve surface in an assembly for the purpose of measuring a flow area through a specific area?  See the attached JPG, I basically have a conical internal diameter with a pin protruding into it..... I need to measure the flow area as shown in the sketch attached here. the way I have this shown in the attached JPG is the way that we had previously performed this in Pro-e.

View 9 Replies View Related

AutoCad :: Drawing A Radio Controlled Scale Model Aircraft

May 27, 2011

We've been using AutoCad for a while now , I'm just about to embark on a new project which I'm not quite sure on scale.

The aircraft I intended to model has a length of 137ft and wingspan of 140ft. Now I can't build it that big but it will probably be around 5-6ft in length once I settled on the scale I'm going to use. My question is do I draw at its original dimension and scale it in paper space or should I draw it in the size its going to be.

View 9 Replies View Related

VideoStudio :: Aircraft Transitions For Pro X2

May 27, 2010

Where i could get aircraft transitions for Pro X2.

View 9 Replies View Related

GIMP :: Repaint Of FSX Aircraft

Sep 21, 2012

I'm currently trying to do a repaint of an FSX aircraft which has a bare metal fuselage. I'm trying to get this to appear 'shiny' or reflective. These AC where of ten highly polished, particularly 'display' AC. I'm aware that this might involve 'alpha channels' but I'm not sure how. to apply them.

Everything else in GIMP, I'm enjoying using and achieving what I want to with trail and error. This would be the 'icing on the cake' if I can get it sorted.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Creating Aircraft Nose Art

Jan 20, 2012

recreating Fearless Fosdick Comic book Cartoon for a noseart on a aircraft. I have the Cartoon logo but need a lot of work.

View 1 Replies View Related

AutoCad 3D :: How To Make Jet Engine Fan Blades

Oct 26, 2012

I am working on making a jet engine. Best way to make jet engine fan blades? so many curves in different directions. I have tried to make contour with polyline, but no luck getting a surface.

View 5 Replies View Related

AutoCad 3D :: How To Design And Create 3D Engine Components

Nov 15, 2013

How to design and create a crankshaft (4-cylinders, inline, Otto engine), piston, and connecting rod using AutoCAD?

View 9 Replies View Related

AutoCAD Civil 3D :: Error / The Microsoft Jet Database Engine Cannot Open The File

Aug 28, 2012

We are using AutoCAD Civil 3D Land Desktop Companion 2009 on all machines and one of our machines is getting the message "Error opening Point Database" and then gives the project file pathcogopoints.mdb.

It also gives the message "The Microsoft Jet database engine cannot open the file.  It is already opened exclusively by another user, or you need permission to view its data."  It is not opened by another user and permissions have been given for all machines to access these files.

Background information:  We move older projects to an external hard drive for archiving and occasionally need to access them as the need arises.  We have done this successfully for some time without issue, but now one of our machines is giving the above error.  The other machine, which the external hard drive is connected, does not have this problem.  We tried moving one project file back to the original location and it seemed to work okay, but another file did not.  Some files were created using an older vrsion of AutoCAD, but that has not been a problem with opening them in the past.  All sharing permissions to the external hard drive have been checked and seem to be working properly.

View 2 Replies View Related

AutoCAD Civil 3D :: Constant Flow In SSA?

Dec 11, 2013

I have a client that wants to put in a constant flow into an inlet and have SSA calculate the HGL downstream of that (as well as add additional flows at additional inlets). Is there a way to do this? I tried adding an "Initial flow" to a pipe but after running the analysis, that flow wasn't the peak of the pipe (I used 1cfs for the initial flow and the peak was 0.77 cfs).

View 6 Replies View Related

AutoCAD Civil 3D :: Peak Flow During Analysis

Mar 2, 2012

I am modeling an existing storm system that is under capacity. After running the model, some of the flows seem to be incorrect. I have one section that has a known flow of 1.31 cfs. The results for this pipe section shows 28.82 cfs (peak flow during analysis) and 6.06 cfs (design flow capacity). The pipe section is a 15" with constructed slope of 0.0088 ft/ft. The max velocity attained is 23.48 ft/sec. I know that the downstream is undersized. Could this flow rate be caused by the downstream backflows? The model is setup as hydrodynamic and rational method. My inertial terms are set at ignore, time step = 0, junction surface area = 0 and variable time step with safety factor 75%. I have gutter bypass flows and my sag structures have ponded area set at 100.

View 8 Replies View Related

AutoCad 2D :: Flow Line Lintetype (with Arrows)

Aug 28, 2010

I have utilized the "old school" Flow Line Lintetype (with the ARROW that is never really centered) for many years

I have been trying to acquire the preferred FlowLine Arrow Linetype (complex with the arrow shape)

So far, I have not succeeded. What is the easiest way to obtain/create this preferred linetype ? (arrow directions change with the direction of the polyline)....

View 9 Replies View Related

AutoCad :: Metal Fab Plant - Flow Water Jet

Mar 23, 2011

I work at a metal fab plant as far as drawing im learning here is my problem i can draw a part save it as a dxf file but when i load it onto flow path instead of a soild cut line it a broken line.

View 6 Replies View Related

Photoshop :: Text Engine

Mar 28, 2008

I have recently upgraded to photoshop CS3 extended (windows). The problem I'm having is the text engine will not initialize all the time. When I try to add text or modify text. I am frequently blocked because the text engine will not initialize.

View 1 Replies View Related

Photoshop :: CS3 Text Engine Not

Jan 28, 2008

whenever i tried to type text using the type tool .. it always got hang ... in turn i have to close the application ... slightly earlier ard december, there's this error msg stating something like " something is preventing your text engine from functioning." now it get slightly better but still hang when u click commit[a green tick at the top]..

View 4 Replies View Related

AutoCAD Civil 3D :: Settings To Reverse The Flow Of A Pipe

May 8, 2012

where the setting is to reverse the flow of a pipe.  I have the flow arrow shown in the wrong direction plus am showing a negative slope on a pipe, which should never be done. 

View 9 Replies View Related

AutoCAD Civil 3D :: Huge Subdivision Work Flow

Mar 15, 2013

I have a huge subdivision that we are about to do in civil 3d.  The subdivision has over 1800 lots.  I am wondering what is the best way to go about this.  At the moment we are thinking we have to do the alignments, profiles and corridors all in one design drawing for it all to be dynamic?  If so this file is going to be huge.  Is there a way we can split it up and still keep everything dynamic?

View 9 Replies View Related

AutoCAD Civil 3D :: Hydra Flow Custom Reports

Sep 6, 2012

Where can I find all the column types that are found in the different report types so I can use them in custom reports.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved