I have a user that imported linework and text from shp files. the map came together but when you try to modify any text it vanishes and a regen does not bring it back. However, it exisit in the file; a qselect all text shows in the props palette but no grips show.
I cleared the map cache but it does not work.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
When I import a PDF into Photoshop, elements from the PDF disappear. I thought it was because it was a layered file but the same thing happens when I bring a flattened jpeg in.
View 3 Replies View RelatedFriends, In some documents (not all) if I place some objects outside page area (desktop) it disappear for other pages. I have to use copy paste (very slow and time wasting process)
check following images for better understanding of the problem:-
Page#01 : [URL]
Page#02 : [URL]
I am using: CorelDraw X4 fully updated (all patches installed).
I was watching a video on YouTube on how to make an explosion. However, the video is not very useful. The part I am stuck on is when he makes a "patch" of the texture in the driveway, and then he covers up his explosive box. After that, he copies the box and is able to make appear and dissapear.
The part of the video I don't understand is at 1 minute, 22 seconds.
Here is the video link: [URL]....
I am completely new to movie editing of any sort and Corel VS x6 Ultimate is my first dipping of my toes so to speak.
When I import a movie into the timeline, the sound from that movie plays for approximately the first 2-4 minutes, and then cuts out. When looking at the sound mixer in the timeline, I can see where the wave simply cuts out at a point between 2 - 4 minutes (the actual time varies for each movie but it is within that 2-4 minutes bracket for all).
I have imported several movies and it is the same for each of them. The only time it doesn't happen is if the imported film itself is only of short duration (3-4 minutes). The other movies all are of approximately 10 minutes duration.
Is there a limit to how long a movie must be when importing to VS? If so, it seems awfully short?
The movies are game recordings made in game using Nvidia Shadow play. All of them play perfectly fine in an actual movie player with the full recorded sound throughout.
I've tried uninstalling and reinstalling the VS software to no avail. I'd really lik to edit the raw footage from the games to make some nice edited movies (figured I would use these game movies to learn the VS software).
While working in a drawing with civil 3D points and a surface created from those points, once in a while the contours will disappear. The contours disappear during any number of different commands, so it doesn't seem to be linked to a specific set of commands. If we save the drawing, close it, and then open it back up the contours are there with no problems. Is there a fix for it beyond closing and reopening the drawing. We are using Civil 3D 2010 in our office, and all of the current updates.
View 5 Replies View RelatedSeems to happen randomply, but my structures and labels disappear when synchronizing.
View 7 Replies View RelatedWhenever I zoom out in a drawing in Civil 3D with surface contours, some of the contours disappear. I imagine this is a result from a system variable setting but could not find it.
View 2 Replies View RelatedUsing C3D 2010. Drawing looks fine in model and paper space. When I try and plot (or plot preview) contour labels are gone! How frustrating. They will not show up again unless I restart C3D and open drawing.
View 4 Replies View RelatedI built a corridor, then corridor surface. Then I changed the corridor onto a different profile. I noticed that the contours at the end were going crazy: the new profile ended before the corridor and everything was going down to zero elevation. So I went to edit my corridor region. I enter the required station, and my contours disappear.
Observations so far:
If I set the end of the corridor region to 2+377.91 to 2+384.54 inclusive, the contours on the surface disappear. The triangles and boundary still display, and the surface gives a Z reading when I hover the mouse over it. If I set the region end to something above 2+384.54 or something below 2+377.91 the contours reappear.
My profile ends at 2+383.00, and I would like the corridor and the surface to end there too!
C3D 2013 SP1
Why do "Quick Profiles" disappear after I save my drawing?
Civil 3D 2007, SP1
Dell Optiplex GX620
XP Pro SP2, Intel P4 3.4 Ghz, 2 GB RAM
256 ATI Radeon X600 Dual Display
I have my design drawing referenced into another drawing for plan and profile sheets. I made some changes to my pipe network in my design drawing, and my manhole profile labels disappeared in my sheet drawing!
The manhole labels in plan view stayed where they were, and updated with the changes I made. The profile labels just disappeared.
Scenario:
1. You have a base map with survey points inserted.
2. You create a sheet, xref the base map, freeze survey points in base map, insert survey points into sheet so they can be manipulated for visual clarity.
Problem:
In sheet drawing, using the edit xref-in-place command to edit base map causes the points to want to be reinserted and in a lot of cases, when the sheet drawing is re-opened, the points are completely gone.
I just installed AutoCAD 2010 Civil 3D on a 32 bit Windows 7 machine. When I open a dwg sent from a surveyor I can see and manipulate all the linework, contours, points, and SRF breaklines in the drawing. When I proceed to save the file to my computer and reopen it, the contours and points disappear; however all linework and surface breaklines remain. The two files that I have been working with were saved originally in 2004 and 2007 format. I have tried saving to their respective versions but that has not worked.
The only way that I have been able to retain these objects is by first exploding them and making them into a block and later inserting them into the other drawing. If I try to make them into a block without exploding them they also disappear.
Is there a way to retain all drawing objects directly from saving?
when I demension a drawing in model space, and then go to the layout where I have a viewport set up, if I change the scale for the viewport, the dimensioning disappears and I can't get it back.
This is a coworker's drawing, so I'll do my best to answer questions on how it was created.
using Civil 3d 2009
I am editing a feature line which is a driveway. I set the feature line to have a constant slope from one end to the other. I had to move the line and when I did the contours went away. I tried to just add grading to the feature line and it when through the steps I always take and acts like its there but I dont see it. The contours are set to 1' and 5' contours w/ design. The feature line that is added when creating a grading from the original feature line (that shows the base of the slope where the contours fit between or in other words it is the feature line that follows the existing/natural ground) is also gone.
Also on another feature line all I did was go into elevation editor and change an elevation and the contours dissapeared.
on newer drawings ( amonth or two old) my crosshairs disappear in paper space (model space is fine)....but on older drawings (some are years old) the crosshairs works fine. neither the older or newer drawings were started by me so i can;t be sure of how they were set up, but (i think) it must have something to do with the way these newer dwgs were set up.
i was using C3D 2011 when the issu started and upgraded to C3D 2013 and i still have the issue. I've loaded the latest service pack but no change.
C3D 2013
windows 7 pro
service pack 1
64 bit
intel xeon 3.07 ghz
12 gb ram
C3D 2009. I have a style that labels the pipe diameter in section view and the type of pipe. When I label the pipe everything shows up fine. Save the drawing and re-open and my labels are gone. I can see them when is opening but after it regenerates, gone. All layers are on display set to true. Tried too many different things and no success. This issue only happens in two drawings.
View 9 Replies View RelatedI just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
I’ve run into an issue with importing survey data using field books.
I started by importing my primary control using a field book. There were no issues with importing these points. I then proceeded to import subsequent field books with additional control and then topographic mapping. In the last field book some points were accidentally overwritten due to an error in the field collection. No error message was given to let me know the survey points were in use and being overwritten. Luckily I caught the error before I proceeded to the next field book.
I tried to reimport the field book that originally created the points that were overwritten. At that point C3D told me that the points being occupied in the field book did not exist. I checked the point list for the primary control field book under the "Import Events" in the Survey Tab of the Toolspace and indeed the points in question were no longer listed.
I then proceeded to reimport all the field books in order, starting with the primary control. I got through several of field books before C3D again told me the point being occupied did not exist. This despite the fact that this same point was occupied in previous field books. After trying once again I was able to get through the field books.
What is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap? I've noticed this twice on same project in separate drawings. If I go to Toolspace and synchronize then it appears back on screen.
First dwg: I created a Pump Station Site Plan and data referenced in my surface and pipe network. I save and close then reopen and EG is gone until I synchronize.
Second dwg: I created a Railroad Crossing Exhibit showing plan and profile. I data referenced in my surface and pipe network. Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.
This isn't good when I have .dsd files that I typically plot my drawing package from. I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours. For this sheet, I had to synchronize and send separate plots just to have contours appear.
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies View RelatedI'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
As the heading says - my Map 3d 2011 rearranges object data fields upon import. If I open the coverage in ArcMAP they are in one order (the correct order), and importing to Map mixes that order up. I have around 125 object data fields for each of 2700 objects. Even if the capability existed in Map, rearranging back to the proper order "by hand" is not an option. Is there a setting or something I overlooked that will tell Map to import the data fields in the same order that they are in before the import?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I have centerline data from SHP file that I can either import or attach to. Has a few lines of object data with it including a centerline of road name. Each one unique. When I attach to the data, I can then "join" with it additional data from a database. When I select a line and look at the properties, it contains both the original object data AND the additional data from the database. SO far So good.
When I edit the style and try to add feature labels only part of the labels come in. I end up with a lot of them with only the letters "text" or just not there. If I right-click on the line and select "Show Data Table" I can confirm that there is data for that label. I find nothing in common with the map features that have labels, or don't have labels. Kind of random.
Question: If I import the SHP file and create object data I need to know if there is a way to "ADD" the rest of my data that is in the database to this object data. If so then I think I could define a Template and label each piece with the block with attributes. Is this possible? OR
Is it possible for me to export to a new SHP file after I have connected to the data (both shp file and database).
Have you ever tried to import an object from photoshop into illustrator? I imported an object I edited with Quick mask in Photoshop and now after i moved it into illustrator the object has a white background around it and i'm trying to get rid of it.
View 1 Replies View RelatedI made a 3D coin object in photoshop CS5.1 then I want to import it into flash CS5.5. how? I did export the 3D object for every single format, but the flash is not recognise the format. And I also did save as every different format, but was not a 3D object.
View 2 Replies View RelatedEverytime I import a model it doesn't work.
View 1 Replies View RelatedWhen importing .svg files into draw and illustrator the size of the objects is different. The svg files have been created with a dpi=72. Illustrator reads the file at that dpi so objects are the correct size. Draw appears to read the files with a dpi=96 which scales the objects down to 3/4 actual size.
Any SVG attribute that can set the dpi so that both programs import correctly Or is there a way to tell Draw to use a dpi=72?
I'd like to import an existing psd file into another psd file as a smart object, so when I change the imported file it is automatically updated in the other file.
View 3 Replies View RelatedMy AE cs6 version is 11.0.2.12, it imports obj file well and I can drag the obj footage to the timeline,since I last did this in June using a form effects.But yesterday when I importing the obj file from the project panel,it warns me with the pop-up window.How can I deal with it?I have uninstall and install for many times,however it doesn't work.
View 4 Replies View Related