Using C3D 2010. Drawing looks fine in model and paper space. When I try and plot (or plot preview) contour labels are gone! How frustrating. They will not show up again unless I restart C3D and open drawing.
View 4 RepliesI'm somewhat new to Civil 3D 2013 and have never encountered this problem before. I've got a top slope standard breakline (dark green line) and bottom slope standard breakline (light green line) with the highest elevation for the top slope at 72' and it gradually slopes down to about 54' within a 75' span. My problem, as you can see in the screen shot below, is I am getting 54'-59' elevation contours right next to a survey point with a 72' elevation whenever I hover my mouse over one of the contours. There are no nearby points with anything near 54' even outside of the surface boundary (shown in magenta).
View 2 Replies View RelatedI am working on three different projects at once. For each project, I was sent a drawing with contours as polylines. Each contour is broken up into polylines about fifty feet long each at elevation 0. I am trying to set the polylines to proper elevation without editing each one individually. Each drawing contains several hundred polylines to modify. I was hoping for some sort of way to use a fence and interval (2') with a starting elevation.
I've searched the internet but haven't found a lisp routine to do this. I thought I remember Land Desktop having something like this, but can't seem to find it in Civil 3D 2012. I have found several threads asking the same question. Each time the poster was referred to a blog 7629. That blog unfortunately seems to have been taken down. If I can’t find an answer soon, it looks that my best option would be to retrace each contour which makes me glad to be paid hourly.
How does a 97 contour pass through a closed feature line with elevations between 97.3 and 97.8?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
I downloaded a bunch of GIS files for Baltimore City and am trying to compile them to make base tiles we can use for different projects. I have tried using MapImport and MapConnect to bring in the shp file for the contours. They come in but without the elevation. The elevation is brought in as Object Data with MapImport, but is there a way to assign that to the elevation field in the polyline properties? MapConnect brings the elevation in as part of the table but again how do I get that elevation assigned to the elevation field in the polyline properties? I just assigned the elevations manually for the 10' contours in one tile. I have to do about 50 tiles, and it seems like there must be a much better way to do it.
View 2 Replies View RelatedSo I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedI have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
. How to assign proposed elevation to layout alignment along each station?. I know there is a way in LDT to assign proposed elevations to s specific range of stations or the full alignment, under menu "profiles/ FG Vertical Alignments/Create COGO Points" I am looking for the same one in C3D.
2. How to add connecting alignment label and station in profile view. For example I have an main alignment and in-between lot of other alignments are meeting with this alignment.
I want to show in profile view of the main alignment the meeting alignment's name and the station it meets with?
How to get precise elevations at lowest and highest points. I need to get spots where the water flows and its precise elevation at that spot as analysis.
View 4 Replies View RelatedIn C3D 2012, when I needed to know what elevation a surface contour was at, I simply hovered my mouse near the point in question and a small window would tell me what elevation my mouse was hovering at. Now, in 2013 I am trying to do the same thing but the little window only has the name of the surface and no elevations. So, how am I supposed to know surface elevations on the fly? Is there some setting to turn that back on?
View 3 Replies View RelatedWe have a good size channel and the section for the channel varies quite a bit. We want to find the volume excavated in the channel between 2 elevations (it is the area of sand per the goetech report)? A template was not used to create the channel surface, breaklines and gradings were used.
View 9 Replies View RelatedSounds simple enough, but how would I subtract 2.300 from every point elevation?
View 4 Replies View RelatedI need to project a surface/grading (or something of that nature) across my berm and have it intersect with the inside bank. This is better explained if you see the attached image. In the plan view you see 4 featurelines. Outside TOE, outside TOB, inside TOB then inside TOE. I need to project the outside TOE across the berm (shown in the section view) then create a new featureline where the line and inside slope of the berm intersect. Note that all the elevation shots vary as does the widths across the berm. What's the best way to do this?
View 9 Replies View RelatedI have two different point groups that I am using in my drawing. One is from a survey done a few years ago and the other is from one that I did just the other day.
I don't have a problem inserting the points or whatnot, but the issue I am having is that when I click "Datum" to adjust the elevations of my new point group (to make my benchmark 100.00'), Civil 3D alters all of my points; including the ones from the older survey. Is a way to adjust elevations to only one set of points.
I have a survey figure that no matter what will not come in with the correct elevations, its a spline (continous) curve that the elevations get blow up on.
Only thing I can think of is the when it starts to interpolate the curve it cant get the elevations correct, this only happens in the curved area, once it goes tangent everything goes back to normal.
C3D11
C3D12-13
Win7x64 6gb
We are running Civil3d 2012. When converting a line or 3d poly to feature line, or just creating one it adds elevation points where it crosses surface breaklines even if you do not assign elevations. We want the feature to just have 2 elevations. The beginning and end. Is this a bug? Or is there another setting somewhere?
View 7 Replies View RelatedI am working on laying out data for some survey crews along the centerline of the road. I have a BC and EC elevation, but the vertices along the CL are at different elevations, which were the original elevation of the poly line before being transformed into a 3D polyline. Is there an easy way to make the full line follow the slope from BC to EC other than manually shifting the vertices?
View 9 Replies View RelatedI graded a commercial site with mostly feature lines. I added points where I needed them to get everything to work. After modifying my surface, I suddenly have zero elevations randomly throughout my site. They don't make any sense why they appear. Some are just added to my drawing and others are existing points that were changed to zero. I can go to a back up drawing from a few hours ago and redo some grading, but I would like to know if there is a way to just erase zero elevations from the surface. I remember LDD was able to create surfaces ignoring elevations below a set elevation.
View 4 Replies View RelatedI have imported a survey file. When I insert the points into the drawing, the elevation changes to something that isn't even recognizable. When I view the point in the survey tab, the elevation is correct, when I view the point in the prospector tab it is different.
View 4 Replies View RelatedI Created a Feature Line from Objects (a polyline). I added it to Site 1, gave it a name, layer. Do I Assign elevations during creation (conversion options)?
I set the Elevation to 8.5 (NOT From surface)
Then I go to
Modify Feature Line -
Elevation Editor.
Why are the elevations locked? I want to set them.
Is there a way to lighten up the colors of my surface slope analysis that the rainbow gives me? My drawing will be going into a report and the colors are too bold. Pastels are a bit too bold.
View 9 Replies View RelatedI have many surfaces overlapping and I want to create one surface with the lowest elevation for each x,y coordinate from the existing surfaces. Does autocad civil 3D have a command for this?.
View 3 Replies View RelatedAttached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
Way to snap or drape the alignment (station) labels over a surface or bring them to the elevation of a selected surface. I'd like to know how to do this if there is a way, so when I look at surfaces in object viewer I can get an idea of where problem areas are from the stationing labels.
View 2 Replies View RelatedI've been sent a survey drawing with elevations. The format is a block, but it's not a named block. Each entity has it's own block name. So, I'm having trouble getting at the elevations. I can't seem to export and get the elevation or Postion Z.
I've tried exploding these blocks, but all I get is a couple of polylines, and some text. Useless. I've attached a sample drawing with a couple of these points.
how do I change the precision for the elevation?
View 3 Replies View RelatedI have an interesting problem. I have imported a shp file from a state agency. This file contains contours for an area. When I tag the pline, it shows a "zero" elevation, but shows a numeric elevation within the DXF_ELEV feature.I am needing to convert these to pline with elevation to work on in autocad. how to get polyline w/ elevations to export from c3d?
View 9 Replies View RelatedMy drawing is set to state plane and feet. when I import GE the elevations are different that those reported on the GE screen. For example at a given location GE reports 538 but the c3d surface report 164 a factor of 3.28. sounds like a meter thing going on. is this normal?
64 Bit Win7 OS
Civil 3D 2011:
I have 7 roads in my drawing and all of the profile data bands except one are correct. We first started with an overall profile with the EG created from a surface and the FG created by drawing in profile, then created multiple profile views. The only thing wrong with the one road profile is the data band is not showing the EG elevations. The strange thing is under Profile View Properties - Bands Tab, Profile 1 is set to EG and Profile 2 is set to FG, so it recognizes it is there and is also shown in the profile, however no elevations. I have tried recreating the multi profile views. Attached is a screen shot to give you a visual.