AutoCAD Civil 3D :: Making 3D Objects - File Size 450MB?
Sep 8, 2013
My file was 550MB and then i purged them and it reduced to 450 MB... I am making a 3D Project.. I am not able to upload the file as it is too big so i give you a little detail what i drew..
There are 3 meters long 5 fence panels and there i worked on details of the ornaments and put materials on them.. There is a solid base with an image and i am using sun properties with lights etc...
I cannot render the file as it gives me an error.. i am not able to work on the file now as it is gigantic size..
I am using autocad 2014 and my pc specs are..
Intel i7..
6GB Ram
64MB VGA
What I am doing wrong making 3D objects? Would it reduce the size if i union all the objects or make blocks ?
View 4 Replies
ADVERTISEMENT
Sep 8, 2013
i dont know what i am doing wrong working on 3D..There are not too many objects. One layer only. i have some blocks and for combining some objects i used union..i applied different materials, Sun properties etc it doesn't take time to render but to edit or even a single click on objects make them very slow..i saw the file size, it was 550MB..i purged them and used overkill command so it reduced to 450MB now..
View 4 Replies
View Related
Nov 7, 2013
I've been working on 3D models and noticed when i take a circle and extrude it along a path (usually a spline) it adds a lot to a file size. The objects are used as electrical conductors on power poles. After a few city blocks of this the model file size becomes basically unusable.
So my question is why does extruding a circle along a curved path increase the file size so drastically and is there another alternative to keep the file size down?
View 6 Replies
View Related
Dec 5, 2011
I'm working in VSX4. I've created a couple of small movies which I want to compile onto a single dvd. The video files from both movies combined only amount to about 3.2 GB, yet when I try to "share" and make the dvd with both of my vsp files, it adds up to be a total of over 7 GB. Is it normal to have this much "inflation" on a project? I've not done anything special as far as graphics or fancy menus or even chapter markers. It's just a handful of clips with the "crossfade" transition applied. And that's it.
View 14 Replies
View Related
May 8, 2013
I created my custom Sheet Set with my desired Sheet Set properties. I named it "wizengr.dst". Who knows how I can make this DST file the default so that the "Creat Sheet" wizard and "Create Section Sheet" dialog box will automatically use it to create a sheet set during sheet creation process.
View 9 Replies
View Related
May 2, 2012
I'm laying out some big panels containing smaller images, so I am adding these using 'File>Place'. However, while the empty panel takes up about 70 MB, placing 3MB worth of smaller images makes the file size explode to a whopping 150MB, making it impossible to fill up the entire board. So far, I've seen file sizes of 500 MB, with Photoshop eating up 50GB swap files. what is going on here?
(I'm using Photoshop CS4 on OS X 10.7.3)
View 8 Replies
View Related
Jul 22, 2013
But when using a nested smart object (meaning a smart object within a smart object) Photoshop CS5 doesn't display the correct file size (at bottom left) or seem to account for the nested smart object file size. Is there a "setting" I’m missing to accurately display what the true file size is?
The Problem: Using multiple nested smart objects that I have reduced the size of my image to be 260x200 for web export. Photoshop CS5 won't let me save a file that appears to be only 3mbs claiming it's over 2 gig's. See image below.
Really not sure what to do about this, the company I work for makes lots of changes so using smart objects is necessary for my work flow. But also seems to be slowing me down trying to figure out issues like this and is problematic when it comes to saving all the work I have been doing.
View 6 Replies
View Related
Nov 22, 2012
I am very much new to AutoCad, but have learned quite a bit about it in the last few days. As a part of the learning I have been building a 3D model of the shed my dad is building. But I ran into a problem on the roof and cant seem to figure out how to click everything into place.
My problem: I need to keep the size and shape of all objects while also connecting the objects to the main structure. I need to keep A and B connected to the main structure and adjust the angles so that both meet at C. But if I move one then another moves out of place. (In the pic B is out of place) All I want to do is hold the beams at A and B in their spot while adjusting the rotation on both beams to meet at C all at the same time. I have tried to fine adjust the rotation on the beams individually but still cant get them together. I cant seem to get the constraints feature to work, because I guess it only works in 2D. I have tried to use the align tool but it just throws everything haywire.
View 6 Replies
View Related
Aug 27, 2013
I am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
View 4 Replies
View Related
Feb 11, 2011
I am using AutoCAD Civil 3D 2009.I have a project files suddenly file size becomes @ 10 MB after saving. Even Titlblock size is 7 MB.
I had installed a latest update over my system as well i tried to clean a file as per below thread. URL....After doing this file size reduced to KB. But if open it again and saved the file size go to MB.
View 3 Replies
View Related
Mar 9, 2012
The issue that I'm having really resides in AutoCAD 2012 after the file has been opened and saved in Civil 3D 2012.
For example, I can use AutoCAD to open a new or existing drawing that has never been used in Civil 3D. I'll run two audits, purge all twice, purge regapps, reset the scale list, then save the drawing. If I open it in AutoCAD again, the file size remains the same.
If I open it in Civil 3D, the file size increases that one time, which is fine. No matter how many times I open it and run the above commands, the file size doesn't change any more than 1 Kb while in Civil 3D.
BUT if I were then to open that same drawing in AutoCAD after closing it out of Civil 3D, then save - it will increase the file size by almost 100 Kb. No matter how much I run the previously mentioned commands the file size will not decrease in size. Additionally, every time I open that particular drawing in AutoCAD again and save it, it increases by another 100Kb+/-. These files are not very large, but I have wblocked some out to save more than 10 times the space.
I've seen similar posts, but they were regarding older versions and seem to be a little different than the problem we are experiencing.
View 4 Replies
View Related
Nov 5, 2012
This issue begins when I use the "aectoacad"-command.
The file that I get is rather small. Saving the same file after using audit and -purge commands will make it larger, I don't get it.
I've seen a hotfix but I already have the latest update: [URL]
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
View 4 Replies
View Related
May 15, 2012
I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?
View 4 Replies
View Related
May 21, 2007
I want to make a logo for a one page flier and my website.
Is it best to set the size of the logo in Photoshop before I create it, or should I make it in Photoshop then reduce the size of the file as required?
View 3 Replies
View Related
Nov 15, 2013
When an object in an XRef is tagged (and the object has an object based PSD) the tag will not update to reflect changes made in the XRef.
This can be fixed in the XRef by running the PropertyDataBrowser command and unticking the Overrides (shown in the leftmost tickbox when two tick boxes present).
Any automatic way to keep the tags up to date? I have attached my VB.Net code attempt for this. It almost works BUT the MultiViewBlock Overrides are ReadOnly.
View 1 Replies
View Related
Oct 10, 2013
How to force objects to move together without making them a block or a group? Never used the anchor command but it doesn’t' seem to "like" my objects either.
Specifically, I have a dynamic block I need to move with a table and not move from the cell it is placed above.
View 2 Replies
View Related
Apr 26, 2011
I have created a farm map in AutoCAD 2008. I want to have a sign made with this image on it with dimensions 775mm x 1096mm. I saved this image as an eps file of size A4 and sent it to the sign maker. The sign maker got back to me and told me that when he blew this image up it was blurry and could I please save it at its actual size.
My problem is that I'm not sure how to save this image at this size.
View 2 Replies
View Related
Apr 15, 2006
I dabble around with Photoshop CS2 and I was just wondering if there are any techniques or tricks to make a dry object appear wet/moist.
View 1 Replies
View Related
Feb 25, 2013
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Oct 17, 2012
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
View 1 Replies
View Related
Sep 10, 2005
how to create B&W photos but with colored objects. For example having a B&W photo of a kitchen table with plates etc. yet the apple in the fruit bowl is red.
View 1 Replies
View Related
Dec 11, 2013
As seen in the attached image, I want the red arc shape to cut out from the green logo it is sitting on top of, while also having the red arc dissappear and reveal the transparent bg. I have tried a bunch of different ways that I have read from these forums but none of them seem to work. Obviously I'm missing something. The green shield logo is made of multiple objects. The closest I got was the arc shape cut out from some of the objects of the green logo, but not all of them, and the arc shape didn't cut out as an arc, but rather as the original rectangle. The arc is created with a regular rectangle with arc effect.
View 3 Replies
View Related
Jun 18, 2012
I'm trying to get the distribute tool to distribute some text objects (for a website menu) evenly. however, using the distribute section of the alignment tool only enables me to set an offset that measure the distance between the left, center or right edge of each object. if the objects are different widths, they will have varying distances between their edges.
View 2 Replies
View Related
Jul 8, 2011
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies
View Related
Jul 24, 2013
I'm trying to set up a script that will grab a group of objects and turn them into a compound path, then apply a clipping mask to the compound path and the next group in the layer.
View 5 Replies
View Related
Apr 2, 2006
ive been making business cards for a friend but i dont know how to create a PDF that is exactley the that size. when i create a PDF the options are thing like A4 etc.. and i dont see a screen to customise the size?
View 7 Replies
View Related
Sep 8, 2011
I need to make a poster in A1 size and I would like to know whether it is feasible to do so with GIMP, because I've seen the list of templates when making a new file and the size goes only up to A3 format.
I realize I can do the designing in A3 format and just print the A1 sheet, but I don't know if this will yield good results when considering the resolution and such.
View 4 Replies
View Related
May 11, 2012
While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 8 Replies
View Related
Sep 24, 2012
I am trying to make a collage which will be printed(=300 DPI) on A3(420 × 297 mm) sized paper. The images I want to take elements from for my collage are all different in size and DPI. When these elements come together they should be similar in size in order to create a new believable scene. 1 element can't be absurdly large in relation to another.
So what I did for my first image (size of 3456 × 2304 pixels, a print-size of 1219,20 × 812,80 mm and DPI 72 × 72) was increase the DPI to 600 in order to obtain a smaller printsize - reducing it to 146,30 × 97,54 mm - cut-out the elements I need and import them into my A3 document. This gave me the size I need for my elements.
However when I try to take elements out of the second image (size of 1500 × 1125 pixels, a print-size of 211,67 × 158,75 mm and DPI 180 × 180) - which I leave unchanged because 211,67 × 158,75 mm is about the size I need for the elements - and place them into the A3 document they are too small. Same story for the third image (size of 2400 × 1600 pixels, a print-size of 304,80 × 203,20 mm and DPI 200 × 200)
View 6 Replies
View Related
Aug 30, 2012
Right now, the only way I know of being able to see Civil grading objects (surface contours, spot elevations, slopes, etc) while using plain vanilla AutoCAD is to explode everything and export to a lower version.
I'm trying out a trial of AutoCAD 2013 to test things, and my Civil drawing shows up as boxes/text when xrefed into another drawing without doing the task above.
I'm looking for a more efficient way to see grading using AutoCAD (not Civil). Civil is expensive, and I'd like to downgrade the drafters who don't know how to use the Civil functions (and never will), but still need grading to show as a dynamic xref in the background of the drawings they're working on. Problem is, if I have to explode and export my drawing every time I want to update the grading xref in their drawing, it wastes more time than I'd like.
Is this the only way and I have to live with it, or am is there an easier way that I haven't dug up yet? I know I'm not an expert at Civil, so I may be going about this all wrong.
View 5 Replies
View Related
Mar 1, 2006
I tried to make an image that, when printed, would take up the entire sheet of paper (having removed the margins in the printing properties), but I seem to have failed.
I made the image 8.5 x 11 inches, but when I printed a test at that size it came out too small... is there a % bigger that I need to make the image to fit, or did I go wrong somewhere else?
View 2 Replies
View Related
