AutoCad 2D :: How To Force Objects To Move Together Without Making A Block / Group
Oct 10, 2013
How to force objects to move together without making them a block or a group? Never used the anchor command but it doesn’t' seem to "like" my objects either.
Specifically, I have a dynamic block I need to move with a table and not move from the cell it is placed above.
View 2 Replies
ADVERTISEMENT
Jul 8, 2011
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies
View Related
Mar 7, 2012
How to force the text to move in a particular direction as the “annotation scale” changes?
I wanted to force the text to move in a particular direction as the “annotation scale” changes but sounds not to respond. I tried to play with the “justify” but seems not to have an effect!
How to control this movement direction of the text as the annotation scale changes?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Nov 15, 2013
How can I make groups for similar components of assembly such as picture below?
View 2 Replies
View Related
Mar 24, 2011
If I have a dynamic block of a window. I can move either side of the block but the basepoint doesn't move. Is there a way to move the basepoint as well so its not off in space? or just delete it and have it now shown?
View 1 Replies
View Related
May 30, 2013
I need to move some layers in a new group filter as you can see on the picture:
layer.PNG
View 2 Replies
View Related
Mar 20, 2009
I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
View 8 Replies
View Related
Aug 15, 2013
I have a block (room info) that has five line os text with attributes that display grips which allow them to be moved in whatever drawing I put them in. Within that block there is a little polyline that is the square with a dash through it to represent sq. ft. that I made into a seperate block ( sq ft tick). The room info block part of it works great in all my drawings, but the darn sq ft tick block within the room info block won't budge! I have tried giving it a seperate insertion point and giving that block its own attribute, but no luck.
Is there any way to have a block within a block that has the same ability to move around as the other elements?
View 2 Replies
View Related
Oct 31, 2013
I am not able to use the "group" command in AutoCAD LT 2013. Instead, I get the message "group with same objects already exists" when there is no existing group.
View 2 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Dec 9, 2012
So a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
View 2 Replies
View Related
Oct 8, 2012
I have a block that is inserting as a group. When i insert my block then explode it parts of the block are grouped.
View 2 Replies
View Related
Feb 3, 2012
When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 Replies
View Related
Oct 11, 2012
I work making electrical projects and it is frequent for me to have a lot of lamps to number, sometimes hundreds.
how to number a group of objects automatically?
View 5 Replies
View Related
Oct 21, 2012
I have a drawing of several walls (so different lines, dimensions, text). I want to draw around it a box of certain size (actually, 1:5 A4) so that it will be centered in the box.
View 4 Replies
View Related
Nov 30, 2012
I'm sure for most of you this is a walk in the park, but for me--is there a simple way to make one character in an image larger than the rest?
View 16 Replies
View Related
Feb 16, 2012
I have been given a set of drawings (300+) and I need to find where and/or if certain blocks (and other objects) are used in these drawings. Is there a utility program or does AutoCAD have the ability to search a group of drawings for a block (by name) and return a list of all the drawings where the block is found.
On that same topic, is there a utility program that will export all the CAD data from a list of drawings to a .csv file or even excel so I can filter and search several drawings for layers, blocks, xrefs etc.
View 2 Replies
View Related
Aug 27, 2009
I need to center-align a rectangle to a group/block object (also it's midle), how do I do that? Can I create/insert a grip or snap point in the midle of the group/block object?
View 7 Replies
View Related
Feb 21, 2013
I am running AutoCAD 2010 full version. Every time I select a line or a group of lines or objects. My program freezes up for a couple of seconds each time, to scan the drawing. So a task that should take 10-15 minute is turning into 25-30 minutes nightmare. Every selection I make there will appear a progress bar and the words "Scanning the drawings..." in the bottom left hand corner of the screen. Is there some setting somewhere i can turn this scanning feature off? Is this issue linked to the layer states?
View 4 Replies
View Related
Feb 4, 2012
In the map module, I put a selection of pictures on a location, but I didn't find the way to drag the group to adjust the location.
This can be done with an individual picture : see screen cap below.
But it cannot be done with a group.
I tried several usual modifier key (alt, shift...) but all I can do with a group is navigating through the map.
Plus when the thumbnails of the groupe are displayed, one cannot cycle back from the first picture to the last one. See screen cap below :
View 2 Replies
View Related
Aug 11, 2013
I am using Illustrator CS6 and followed a tutorial in Lynda.com on how to make a circular logo. Turned out great, the trouble is I can't lock the layers or group them together to move to my desired location.
View 5 Replies
View Related
Jul 15, 2013
I have created a layer group - I want to move it butit seems I must still move one layer at a time. Is there a way to move a layer group across an image?
View 3 Replies
View Related
May 8, 2012
When dealing with a single image in its layer I could use "pick tool" to select image and move it with accuracy using keyboard arrows.
I created a mask from a vector (PSP created by itself a group with two layers => raster + mask). After that I am unable to move the group layer using keyboard arrows. I don't know whether this behavior is common to all type of layer groups, but not be able to use the arrows is annoying! Am I missing something? Is it possible to move layer group using arrows (keyboard)?
Ps.: Another "problem" happens when I select two raster layers and try to resize them drag'n'droping. It is impossible and I need to create a group layer to move them together. Is it the PSP common behavior?
View 2 Replies
View Related
Oct 15, 2012
How do I move more than one layer into a layer group at a time?
View 2 Replies
View Related
Jul 10, 2013
I have a document with a single layer and a single group (GroupItem) in that layer.
Unfortunately, I didn't create the .ai file, so I don't know exactly what is in the group; however, there appears to be a bunch of complex clipping masks and gradient effects, etc. deeply nested within it.
I've successfully scripted a few tasks like resizing the group with no ill effect... in other words, this works as expected:
app.activeDocument.activeLayer.pathItems[0].resize(50,50);
However, as soon as I try to move/translate/reposition the group, all the effects/masks seem to go wonky, I've tried all of the below with no success (200 is just arbitrary as a test):
app.activeDocument.activeLayer.pathItems[0].left = 200;
app.activeDocument.activeLayer.pathItems[0].translate(200,0);
I have no problem moving the group around on the document with my mouse... all the effects/masks are still nice and clean, so I'm confused as to why I can't do the same thing via JavaScript.
View 3 Replies
View Related
Jul 29, 2013
If you create a group, after that select it and click on the insertion point (grip) using a lot of time the space bar (to switch between move, rotate, scale and mirror) after a while autocad crash.
Tested in AutoCAD 2013 and 2014 in more the one installation.
View 1 Replies
View Related
Sep 13, 2012
How do I move a picture or group of pictures from ome catalog to another catalog in Organizer?
View 5 Replies
View Related
Dec 13, 2012
I built a building in AutoCAD Architecture 2013 and inserted the file into 3DSMax 2013 via the file link manager. I would like to group certain AEC objects from my DWG file in 3DSMax so that I can assign materials, move them around without losing placement, but the "Group" and "Assemble" drop-downs are disabled. Why am I not able to group these objects?
View 2 Replies
View Related
Dec 23, 2011
I'm trying to rotate a group of objects along an axis that is not x y or z. The objects are imported from Rhino. I also import a line representing that rotation axis. How do I set that line to be my axis?
View 1 Replies
View Related
Dec 27, 2013
I'm looking for a way to select multiple objects (all identical) and resize them all at once without also changing their positions.
Said another way, I'd like to resize a group of identical objects but instead of there being a single center/anchor point in the middle of the bounding box, I'd like each object within the group to retain it's center/anchor point (so multiple anchor points) and resize based on those positions.
View 3 Replies
View Related
Apr 30, 2013
I would like to outline a grouped object with a single stroke line and not have each object outlined individually. It is a complex image with some clipping masks and effects applied.
View 8 Replies
View Related