AutoCAD Inventor :: Making Group In Assembly
Nov 15, 2013How can I make groups for similar components of assembly such as picture below?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Any Way To Group Assembly Components
May 7, 2012Is there any way to group assembly components?I'm aiming at a live mass calculation for different level of details/design views.In this case I'v got an assembly with about a ton of stainless steel spread out on different subassemblies.
I have made representations showing only the welded stainless steel and I would like the weight of these to appear in the partlist. Not the weight of the complete subassemblies.
AutoCAD Inventor :: Weights And Cog Of Group Of Parts In Assembly?
Jan 10, 2012Is it possible to select a group of parts in an assembly and then see the weight of just these parts or the centre of gravity of the selected group?
View 7 Replies View RelatedAutoCAD Inventor :: Making Parts In Assembly Act Solid
Mar 25, 2013I need to make two parts act solid. That is, that they need to slide and react as if they were real instead of just going through eachother. In the assembly included, the "rotator" needs to rotate as it is pulled through the "rifled column (2)". The other constraints in the assembly are fine as is, but if I can make these parts react correctly, then the center pole and blade will rotate.
View 3 Replies View RelatedAutoCad 2D :: How To Force Objects To Move Together Without Making A Block / Group
Oct 10, 2013How to force objects to move together without making them a block or a group? Never used the anchor command but it doesn’t' seem to "like" my objects either.
Specifically, I have a dynamic block I need to move with a table and not move from the cell it is placed above.
Paint.NET :: Making One Character In A Group Larger?
Nov 30, 2012I'm sure for most of you this is a walk in the park, but for me--is there a simple way to make one character in an image larger than the rest?
View 16 Replies View RelatedIllustrator :: CS6 - How To Group Or Lock Layers When Making Circular Logo
Aug 11, 2013I am using Illustrator CS6 and followed a tutorial in Lynda.com on how to make a circular logo. Turned out great, the trouble is I can't lock the layers or group them together to move to my desired location.
View 5 Replies View RelatedAutoCAD Inventor :: Convert Weldment Assembly Back To Regular Assembly Template
Jun 6, 2012I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedAutoCAD Inventor :: Creating Separate Assembly Out Of Various Component Parts In Existing Assembly
Jul 10, 2012I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Assembly Has Double User Request At Inserting In Assembly
Sep 18, 2012We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
AutoCAD Inventor :: Tube And Pipe Assembly Styles Don't Translate Into Other Assembly Files
Feb 9, 2012I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
AutoCAD Inventor :: Find Interior Volume Of Assembly By Subtracting Assembly From Block
Apr 23, 2012I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Inventor :: Place Assembly Constraints With Parameters From Parts In Assembly?
Oct 30, 2012it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
AutoCAD Inventor :: Make Sub Assembly From Parts From Main Larger Assembly?
Oct 31, 2011My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
AutoCAD Inventor :: Translate Assembly Component Using ILogic / Offset From Parent Assembly Origin
Nov 9, 2011I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedAutoCAD Inventor :: Saving Assembly Parts As New (sub) Assembly?
Nov 28, 2011Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
AutoCAD Inventor :: CoG Needed For Each Sub Assembly In A 2 Part Assembly On An IDW
Oct 3, 2013I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
AutoCAD Inventor :: Assembly Within Assembly Detection
Sep 3, 2013I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedAutoCAD Inventor :: Two Assembly Positions In One Assembly
Mar 21, 2013My Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
AutoCAD 2010 :: Group Selection Set Unable To Select Individual Elements Within Group
Mar 19, 2013One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
AutoCAD Architecture :: 2010 / How To Explode Group When Group Name Not Found
Apr 15, 2013how to explode group when group name not found
View 1 Replies View RelatedAutoCAD Inventor :: How To Group The Material In Library
Jul 17, 2013is it possible to group the material in the library?
ex: alum will have 1/8 thk flat bar etc, 2x2 alum angle...and so on.
inventor 2013
vault 2013
AutoCAD Inventor :: Difference Between Group / Composite And Surface
Jun 6, 2012what is the difference between group, composite and surface in COPY OBJECT option in ipt?
View 6 Replies View RelatedMaya Modeling :: Chairs And Some Glasses On Table / Group Them And Instance That Group Hundred Of Times?
Nov 29, 2011I have table, several chairs and some glasses and plates on table. I want to group them and instance that group, hundred of times. Problem is that I do not have materials implemented and I will not until client is satisfied with arrangement. I have problems later, even using many scripts I found, to add material to all instances. Only way is to select one by one.
Other thing is that there might be new objects added into set, so best way would be to add to master group and that will be added in instances of that group automatically, but that does not work with Maya.
AutoCAD Inventor :: Unable To Configure Transfer From Factory Design Suite Group?
Oct 8, 2012I was unable to configure a transfer from Factory Design Suite Group. This is more appropriate here.
Approx August, Inventor 2013 started to randomly crash.
Until then it was working fine.
Service packs & several re-installs have not cured it.
I cannot replicate the process.
I am lucky if I get 20 minutes of operation.
One day it actually ran all day. The next it crashed maybe 20 times.
Several projects have only needed 2D work which works fine but I have run out of time to postpone the Inventor projects.
AutoCAD Inventor :: Importing Solidworks 2011 STEP With Only Construction Group Wires
Jan 10, 2013import this Solidworks 2011.STEP. Can turn this .STEP into a usable inventor part?
I'm using Inventor PRO 2012 64-bit.
AutoCAD Inventor :: Making STP Files Without Inventor
Nov 15, 2011Is there a program that can make stp files from our inventor models? Our purchasing department wants to do this task for our vendors and they don't want in have a full version of Inventor to do it.
View 6 Replies View RelatedAutoCAD Inventor :: Making Ifeatures - Dynamic Ones
Aug 18, 2013I can make simple iFeatures but i want to made more dynamic ones. I have attached one that i downloaded from the internet. On this iFeature, you can select a face and pick start / end points to position the feature.
View 6 Replies View RelatedAutoCAD Inventor :: Making A Rectangular Spring?
May 2, 2012I have to make a spring for an engineering class I have yet me nor the teacher know how to make a rectangular spring.
View 3 Replies View RelatedAutoCAD Inventor :: Making Lines In Object
Dec 11, 2013So I have a student who wants to put these lines in the object. Since it would be very difficult to make these lines enclosed and looking right is there anyway to put these lines in the object. I don't understand why Emboss works on letters but not lines. That is all letters are.
View 9 Replies View RelatedAutoCAD Inventor :: Making A Roll Of Tape?
Mar 28, 2012I have to make a roll of tape in Inventor, but I'm not too familiar with/used to the program. It's the small invisible adhesive tape, like the kind you'd find in office. So far, I sketched and extruded the plastic part the tape gets wrapped around, which is basically just a small tube. I also have a rectangle that's really long for the actual tape part, and that's extruded but very thin. they're both made as standard.ipt files. I opened a standard.iam file to put them together using constraints, but I'm not exactly sure how. I have the edge of the rectangle on the outside of the circle, so I just have to wrap it around. I'm assuming I just bend the rectangle (tape) around the circle (plastic part), but I don't know how to do that.
View 1 Replies View Related