AutoCAD Inventor :: Making A Rectangular Spring?
May 2, 2012I have to make a spring for an engineering class I have yet me nor the teacher know how to make a rectangular spring.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Curved Rectangular Spring / Animate
Sep 23, 2012A multi-part question:
1.) How do you recommend I model a rectangular spring?
2.) How do I apply the concept from the initial question and apply a curve to the spring?
3.) How do I mimic the properties of a spring in animation?
AutoCAD Inventor :: Design And Simulate Extension Spring (not Compression Spring) In 2012
Oct 30, 2013how to design and simulate a extension spring (not compression spring) in Autodesk Inventor 2012.
View 5 Replies View RelatedAutoCAD Inventor :: Compressed Look Spring
May 31, 2013How do i get the spring to have a compressed look with flat end....i try different settings but not able to have the spring rings to touch for a compressed look.
View 8 Replies View RelatedAutoCAD Inventor :: Spring Has No Centerline
Apr 6, 2012I created a spring but when I try to assemble it with constraints it appears to lack a centerline.
View 7 Replies View RelatedAutoCAD Inventor :: How To Make A Spring Moved
Aug 8, 2012I can't make a spring moving according to other parts' behaviour. I use Inventor 12. by the way I sent two photos (scanned by Microsoft Security Essentials-no problem), the spring in the photos was made by design accelerators-as compression spring. I want from spring to move with the other parts but it doesn't. For instance when I pull the blue part down, blue part, and the spring go the into of each other.
View 3 Replies View RelatedAutoCAD Inventor :: How To Make Conical Spring
Jan 13, 2004I have cut out a spiral from top on a cylinder, now I want to make a nice finish. And cutting with a conical spring profile is the way to do it.
View 5 Replies View RelatedAutoCAD Inventor :: Draw A SPRING Around A Circle
Aug 5, 2012How can i draw a SPRING around a circle ? like Attachment picture. (not in the Sketch) in the Part Modeling.
View 1 Replies View RelatedAutoCAD Inventor :: Drain Care Spring
May 29, 2013Inventor offers us several options to design a coil of constant pitch with a tapering diameter. However, I am unable to create a coil with a taper and a changing pitch at the same time.
We are using Inventor 2013. I would like to produce similar parts as the attached 2D drawings in 3D, only with a changing pitch (distance between revolutions) per revolution. Can it be done? There is software for the CNC spring manufacturing machines to produce such parts. Therefore the proper inputs to produce these effectively and efficiently, are available somewhere.
The part I've been describing uses .09 diameter wire and has about 54 coils in about 8 inches. The starting inside diameter is about .53" and the pitch is about .27" the ending inside diameter is .109" +/- .01 with a pitch of about .091".
Here are 2D drawings of similar parts, the last (NF3) is closest to what we need.
AutoCAD Inventor :: Draw A SPRING Around A Circle?
Jul 30, 2012How can i Draw a SPRING around a circle ?
View 3 Replies View RelatedAutoCAD Inventor :: Spring Steel Constraining
Jul 2, 2013I have a piece of steel that I need to flex. It is a piece of blue tempered spring steel pressed against the corner of a brass pressure transfer. The opposite end of the transfer is tangentlly constrained to a latching mechanism. When the latching mechanism is lifted, the transfer rotates slightly around a screw (made invisible) and the spring is flexed. When the latch is released, the spring returns the latch to the closed position. I have several other assemblies that use the same principal, but some with just a piece of mild steel used as a cover as well as a spring.
View 5 Replies View RelatedAutoCAD Inventor :: Create Coiled Spring On Arc?
Jul 19, 2012Is there a way to create a Coiled spring of 26 coils on an arc radius of 3.781inchs arc length of spring is 13.706inc
The major dia of the spring is 3/8 inch with the wire dia is NOT given
The original Hand done drawing are attached in PDF version 6 format
As for Inventor I'm using 2012. It is the first time I have come across this sort of problem I thought of doing a single coil and creating a sub assemble of it around a construction line arc rad with each coil mated and rotated at an angle to the other but then thought that there must be an easier way of creating this spring.
Inventor 2013 Pro
AutoCAD Inventor :: Make Each End Of The Spring Flat?
Oct 14, 2011how can i make each end of the spring flat.How best to cut the end sections so the wire is flat
Invenotr 2012
AutoCAD Inventor :: Creating Spring Animation?
Jul 24, 2013I use inventor 2011 and i want to create a spring animation. I followed this video step by step but when i constrain the upside and the downside of the spring to those plate objects i get an error.
this is the video i followed:
[URL].....
AutoCAD Inventor :: Assembling Spring To Item
Nov 25, 2013I cant seem to find out how to assemble the spring to the rest of my item.
Will you be able to use the assembly if I do not provide the parts used(maximum 3 uploads)?
AutoCAD Inventor :: Compression Spring Component Generator
Jun 17, 2013Can I use the spring generator to design a spring for me? I know my spring rate, my loads and my dimensions. I don't care how many active coils the spring has as long as it performs to the specifications I've calculated.
View 3 Replies View RelatedAutoCAD Inventor :: Coil Or Spring Along A Curved Path
Dec 3, 2010I have a unique part that needs to be generated in IV. It is a sping that follows a curved path (see attachment). I do have complete information, just need to draw it in.
View 8 Replies View RelatedAutoCAD Inventor :: Show Spring Flexing Back And Forth
Jan 2, 2013I would like to animate the model so that it moves like a whip antenna.
I would like to show the spring flexing back and forth with everything above the spring moving side to side as spring moves.
I have tried several ways to do this but have not had any luck. I haven't done a lot of animation.
I have attached the assembly and parts.
It doesn't have to perfect it's for a presentation.
IV2012 Product Design Suite
Windows XP Professional 32 Bit
AutoCAD Inventor :: Dynamic Simulation - Use Spring Joint Or Force?
Jan 28, 2013I'm designing a hinged cover for something right now that will use a pair of gas extension springs for assisted opening. I'm currently working to figure out how much force it will take to open the cover using different values of spring - it's available in 50, 100, 150, 200, etc., lb versions.
I've tried running simulations using a force applied to the moving end of the gas spring, and I've trued running simulations using a spring joint applied between the fixed and and the moving end of the gas spring, and I'm getting dramatically different results between the two. For instance, using a 200 lb force shows me that I need about 25 extra lbs of force applied to the handle of the cover to open it, where when I use that same 200 lbs on a spring joint, I need 50-75 lbs to keep the cover closed, because it will open on its own.
AutoCAD Inventor :: Resemble Shrinking Of A Spring With Coil Command?
Nov 13, 2013I want to insert a spring in an assembly, and for that i will make a spring with the coil command. if i will squeese it between surfaces, will it resemble a spring? will the bindings come closer (i hope they are called bindings, otherwise tell me how they are called)?
View 2 Replies View RelatedAutoCAD Inventor :: Conical Spring That Can Change In Pitch As It Tapers?
May 23, 2013I need a conical spring that can change in pitch as it tapers. Basically the spring starts in a compression style and tapers down to an expasion style. The CNC spring machines are capable to produce it, but am I able to, through Inventor? If not when will we have this feature capability?
View 7 Replies View RelatedAutoCAD Inventor :: Created Compression Spring / How To Simulate Under Dynamic Simulation
Mar 17, 2012i have created compression spring under design and how can i simulate it under dynamic simulation? I cant create spring in dynamic simulation.
View 1 Replies View RelatedAutoCAD Inventor :: Module generating inventor springs 2012 can Generate A Conical Spring
Oct 4, 2011On the module generating inventor springs 2012 can generate a conical spring?
View 9 Replies View RelatedAutoCAD Inventor :: Twist Rectangular Tube
Dec 24, 2013Im trying to reproduce the part attached. Its a rectangular aluminum tube. .320 x .180 approx an inch long. I tried lofting 2 sketches but the result does appear like the attached image.
View 8 Replies View RelatedAutoCAD Inventor :: Equation For Rectangular Pattern
Feb 22, 2012Can an equation be used to calculate equal distances when using the rectangular pattern.Regarding the attached .ipt file i would like to place 25 holes in the X direction with equal gap size between each hole.Also how to calculate the number of holes in the Y direction again with equal distance between each hole.I have not done this before with equations but was thinking that i would need to use the Length x Width in the equation.Do i need to add figures into the Parameters box also?
The attached file with the Hole feature the sketch is not constrained for the purpose of using an equation so i know how far from the start of the part to get equal distances between each hole to the end of the part .
AutoCAD Inventor :: Dimensions Of Rectangular Prism
Jan 1, 2014regarding obtaining the dimensions of a simple retangular prism?
In this particular case (file attached) the geometry was imported from Revit, so it's really just imported SAT file. After importing, "Make components" was run to generate individual part files. The resulting part is therefore created using the origin of the parent assembly, so although it's "just a box" - it is spatially displaced and oriented at an unknown angle.
I'm looking for a way to identify the 3 dimensions that define the shape of the prism.
AutoCAD Inventor :: How To Adjust Rectangular Pattern
Feb 20, 2012I am using Inventor 2012. I have a horizontal feature that terminates at a vertical plane on one end and an angled plane at the other end. I want to pattern it down but when I use Adjust, the patterned features do not adjust to the angled plane. They just go strait down from the first feature.
Does Adjust only work if the terminator is a solid surface instead of a plane?
AutoCAD Inventor :: IPart And Rectangular Pattern
Nov 3, 2011I am having a problem with an iPart. I created a rectangular patern in an iPart. When I place the member of the iPart in the Assembly file the pattern is not there. I need it to constrain another part to it.
View 4 Replies View RelatedAutoCAD Inventor :: Non-Circular / Non-rectangular Pattern
May 14, 2013I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
AutoCAD Inventor :: Rectangular Hole Pattern
Dec 1, 2009Looking for some sample code for patterning a hole in a part using Inventor 2010. I dont need it to be selected because it is the only hole i have in the part. My main trouble is that I am having trouble withobjectcollection idea. As you can guess I am a newbie at Inventors API.
View 5 Replies View RelatedAutoCAD Inventor :: Circular / Rectangular Pattern Sketch Name
Nov 19, 2012I need to know what sketch is associated to either a "Rectangular"or "Circular"array. This is so I can filter out sketches that are not repeated in an array.
Here is my code so far (Circular Array).
Dim oCP As CircularPatternFeature
For Each oCP In oDef.Features.CircularPatternFeatures
THIS IS THE TROUBLE LINE If sketch = oCP.Parent Then
Set oCP = oDef.Features.CircularPatternFeatures.Item(oCP.Name)
[code]........
I have a simple test part containing an extruded disk (Sketch1) and 8 holes on a pcd (Sketch2). I only want to array a sketch if it is arrayed.