AutoCAD Inventor :: Module generating inventor springs 2012 can Generate A Conical Spring
Oct 4, 2011On the module generating inventor springs 2012 can generate a conical spring?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Make Conical Spring
Jan 13, 2004I have cut out a spiral from top on a cylinder, now I want to make a nice finish. And cutting with a conical spring profile is the way to do it.
View 5 Replies View RelatedAutoCAD Inventor :: Conical Spring That Can Change In Pitch As It Tapers?
May 23, 2013I need a conical spring that can change in pitch as it tapers. Basically the spring starts in a compression style and tapers down to an expasion style. The CNC spring machines are capable to produce it, but am I able to, through Inventor? If not when will we have this feature capability?
View 7 Replies View RelatedAutoCAD Inventor :: Design And Simulate Extension Spring (not Compression Spring) In 2012
Oct 30, 2013how to design and simulate a extension spring (not compression spring) in Autodesk Inventor 2012.
View 5 Replies View RelatedAutoCAD Inventor :: IPart Workflow And Vault - Generate All Or Generate Only New
Sep 4, 2012We are using iPart - iAssembly workflow with Inv-2013 and Vault Basic 2013
My question is related to released state of iparts. Currently we are generating/ releasing
all the iparts when new member is added in order to manintain the parent child version relationship
Example : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent
from Vault and add 009 member to it.
Question :
Do I have to generate all and check those in to maintain the version relationship between the child and parent inside
Vault 2013 ?
Or
Only generating 009 will maintain version relationship inside Vault 2013
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
AutoCAD Inventor :: Extrude To Conical Parts
Nov 11, 2013I am creating a fan wheel (see attached). The fan blade needs to be extruded to the inside surface of a 2 piece cone assembly. To make it even more difficult, the inner portion of the blade needs to be cut at an angle so that the extrusion ends at the cones. See attached pdf reference sketch. The result for the flat pattern blade edge should be two parabolic curves.
View 9 Replies View RelatedAutoCAD Inventor :: Emboss On Non-Round / Conical Faces
Nov 20, 2013I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies View RelatedAutoCAD Inventor :: Wrap To Non Flat / Cylindrical / Conical Surface
Jul 13, 2012Is there any way / trick to wrap a 2D sketch to a non-flat/cylindrical/conical face? See attached part. I'd like wrap the lines in Sketch2 to the ring's outer face in order to get a proper path for "engraving". I see no other way to get a proper path for sweep, because project along vector won't work.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Profile Plane Tangential To Conical Surface
Oct 31, 2013I have the German version of Inventor 2014, so some translations may be different.
I want to project a text on a sketch onto a conical surface. The error message is that the chosen surface wasn't tangential to the profile plane. I found no way to rotate the plane.
How do I project my profile onto the conical surface or How do I make the profile plane tangential to the conical surface?
AutoCAD Inventor :: Trim Curved Sheet Metal To Conical Surface
Nov 20, 2013I am drawing a fan wheel. The fan blade is curved intersects the shroud, consisting of two cones. I do not know how to trim the blade to the cones. I tried to "split" the blade at the cones and then "delete face" but then the "Go to flat pattern" section on the ribbon is missing. If I suppress the "delete face" feature the "Go to flat pattern" re-appears.
View 1 Replies View RelatedAutoCAD Inventor :: Emboss Command - Only Planar / Cylindrical Or Conical Faces Supported
Oct 3, 2013In Solidworks I can emboss a sketch into a 'wavy' surface without difficulty.
If I try to do the same thing with Inventors 'Emboss' command It fails with "Only planar, cylindrical or conical faces are supported."
Surely there must be a way to achieve the same effect as in the first illustration, in Inventor ? Am I missing something obvious?
AutoCAD Inventor :: How To Build Assembly With Conical Rollers Rolling On Cylindrical Support
Feb 26, 2013I'm trying to build an assembly with conical rollers rolling on a cylindrical support. Refer to the attached sketch. I'd like to be able to constrain the conical faces of the roller to the cylindrical surface of the support. It doesn't seem to be possible to do that in Inventor; or, more accurately, it's not possible to put a tangential constraint on both conical faces at the same time. The first tangential constraint causes the part to place a generatrix line parallel to the axis of the cylinder. (I had to look up what generatrix means, too.) So it's not possible to make the second tangential constraint.
How I can do this? Just in case that's not difficult enough, the reason I'm doing this is because, ultimately, the support will not be a plain cylinder but actually a tube that also curves. It's the behaviour of the roller through various curves on the support tube that I ultimately want to model, but I have no hope of doing that if I can't even get the roller constrained onto a plain cylinder.
AutoCAD Inventor :: Compressed Look Spring
May 31, 2013How do i get the spring to have a compressed look with flat end....i try different settings but not able to have the spring rings to touch for a compressed look.
View 8 Replies View RelatedAutoCAD Inventor :: Spring Has No Centerline
Apr 6, 2012I created a spring but when I try to assemble it with constraints it appears to lack a centerline.
View 7 Replies View RelatedAutoCAD Inventor :: Making A Rectangular Spring?
May 2, 2012I have to make a spring for an engineering class I have yet me nor the teacher know how to make a rectangular spring.
View 3 Replies View RelatedAutoCAD Inventor :: How To Make A Spring Moved
Aug 8, 2012I can't make a spring moving according to other parts' behaviour. I use Inventor 12. by the way I sent two photos (scanned by Microsoft Security Essentials-no problem), the spring in the photos was made by design accelerators-as compression spring. I want from spring to move with the other parts but it doesn't. For instance when I pull the blue part down, blue part, and the spring go the into of each other.
View 3 Replies View RelatedAutoCAD Inventor :: Draw A SPRING Around A Circle
Aug 5, 2012How can i draw a SPRING around a circle ? like Attachment picture. (not in the Sketch) in the Part Modeling.
View 1 Replies View RelatedAutoCAD Inventor :: Drain Care Spring
May 29, 2013Inventor offers us several options to design a coil of constant pitch with a tapering diameter. However, I am unable to create a coil with a taper and a changing pitch at the same time.
We are using Inventor 2013. I would like to produce similar parts as the attached 2D drawings in 3D, only with a changing pitch (distance between revolutions) per revolution. Can it be done? There is software for the CNC spring manufacturing machines to produce such parts. Therefore the proper inputs to produce these effectively and efficiently, are available somewhere.
The part I've been describing uses .09 diameter wire and has about 54 coils in about 8 inches. The starting inside diameter is about .53" and the pitch is about .27" the ending inside diameter is .109" +/- .01 with a pitch of about .091".
Here are 2D drawings of similar parts, the last (NF3) is closest to what we need.
AutoCAD Inventor :: Draw A SPRING Around A Circle?
Jul 30, 2012How can i Draw a SPRING around a circle ?
View 3 Replies View RelatedAutoCAD Inventor :: Spring Steel Constraining
Jul 2, 2013I have a piece of steel that I need to flex. It is a piece of blue tempered spring steel pressed against the corner of a brass pressure transfer. The opposite end of the transfer is tangentlly constrained to a latching mechanism. When the latching mechanism is lifted, the transfer rotates slightly around a screw (made invisible) and the spring is flexed. When the latch is released, the spring returns the latch to the closed position. I have several other assemblies that use the same principal, but some with just a piece of mild steel used as a cover as well as a spring.
View 5 Replies View RelatedAutoCAD Inventor :: Create Coiled Spring On Arc?
Jul 19, 2012Is there a way to create a Coiled spring of 26 coils on an arc radius of 3.781inchs arc length of spring is 13.706inc
The major dia of the spring is 3/8 inch with the wire dia is NOT given
The original Hand done drawing are attached in PDF version 6 format
As for Inventor I'm using 2012. It is the first time I have come across this sort of problem I thought of doing a single coil and creating a sub assemble of it around a construction line arc rad with each coil mated and rotated at an angle to the other but then thought that there must be an easier way of creating this spring.
Inventor 2013 Pro
AutoCAD Inventor :: Make Each End Of The Spring Flat?
Oct 14, 2011how can i make each end of the spring flat.How best to cut the end sections so the wire is flat
Invenotr 2012
AutoCAD Inventor :: Creating Spring Animation?
Jul 24, 2013I use inventor 2011 and i want to create a spring animation. I followed this video step by step but when i constrain the upside and the downside of the spring to those plate objects i get an error.
this is the video i followed:
[URL].....
AutoCAD Inventor :: Assembling Spring To Item
Nov 25, 2013I cant seem to find out how to assemble the spring to the rest of my item.
Will you be able to use the assembly if I do not provide the parts used(maximum 3 uploads)?
AutoCAD Inventor :: Compression Spring Component Generator
Jun 17, 2013Can I use the spring generator to design a spring for me? I know my spring rate, my loads and my dimensions. I don't care how many active coils the spring has as long as it performs to the specifications I've calculated.
View 3 Replies View RelatedAutoCAD Inventor :: Curved Rectangular Spring / Animate
Sep 23, 2012A multi-part question:
1.) How do you recommend I model a rectangular spring?
2.) How do I apply the concept from the initial question and apply a curve to the spring?
3.) How do I mimic the properties of a spring in animation?
AutoCAD Inventor :: Coil Or Spring Along A Curved Path
Dec 3, 2010I have a unique part that needs to be generated in IV. It is a sping that follows a curved path (see attachment). I do have complete information, just need to draw it in.
View 8 Replies View RelatedAutoCAD Inventor :: Show Spring Flexing Back And Forth
Jan 2, 2013I would like to animate the model so that it moves like a whip antenna.
I would like to show the spring flexing back and forth with everything above the spring moving side to side as spring moves.
I have tried several ways to do this but have not had any luck. I haven't done a lot of animation.
I have attached the assembly and parts.
It doesn't have to perfect it's for a presentation.
IV2012 Product Design Suite
Windows XP Professional 32 Bit
AutoCAD Inventor :: Dynamic Simulation - Use Spring Joint Or Force?
Jan 28, 2013I'm designing a hinged cover for something right now that will use a pair of gas extension springs for assisted opening. I'm currently working to figure out how much force it will take to open the cover using different values of spring - it's available in 50, 100, 150, 200, etc., lb versions.
I've tried running simulations using a force applied to the moving end of the gas spring, and I've trued running simulations using a spring joint applied between the fixed and and the moving end of the gas spring, and I'm getting dramatically different results between the two. For instance, using a 200 lb force shows me that I need about 25 extra lbs of force applied to the handle of the cover to open it, where when I use that same 200 lbs on a spring joint, I need 50-75 lbs to keep the cover closed, because it will open on its own.
AutoCAD Inventor :: Resemble Shrinking Of A Spring With Coil Command?
Nov 13, 2013I want to insert a spring in an assembly, and for that i will make a spring with the coil command. if i will squeese it between surfaces, will it resemble a spring? will the bindings come closer (i hope they are called bindings, otherwise tell me how they are called)?
View 2 Replies View RelatedAutoCAD Inventor :: Created Compression Spring / How To Simulate Under Dynamic Simulation
Mar 17, 2012i have created compression spring under design and how can i simulate it under dynamic simulation? I cant create spring in dynamic simulation.
View 1 Replies View Related