Is there any way to group assembly components?I'm aiming at a live mass calculation for different level of details/design views.In this case I'v got an assembly with about a ton of stainless steel spread out on different subassemblies.
I have made representations showing only the welded stainless steel and I would like the weight of these to appear in the partlist. Not the weight of the complete subassemblies.
I am working on a large plant piping project and while I've seen this behavior before I've never seen it this bad.
Attached is a screen shot of a small portion of the assembly drawing in which you can see a good example of what I'm dealing with.
At the top you can see a weld neck flange that appears to be attached to air where there should be an elbow. In the middle you can see that on one side of the elbow there is missing geometry.
At the bottom is another flange that attached to air where there should be an elbow. This drawing is littered with these errors and as such is unsuitable for even a reference document.
I have turned visibility of these components off and on without resolution. I have turned on tangent and interference edges without resolution.
I have translated a copy to ACAD to see if it's simply graphical but the ACAD file shows the same errors. I have checked parallel and perpendicularity and all is well.
Inventor 2012 Pro 64bit (Build 219 - SP2)
Vault 2012 Pro Admin
Windows 7 Pro 64bit
Quad Core processor 2.26 Ghz
16 GB DDR3 RAM
1.5 GB Nvidia Quadro FX 4800 (Driver Version 9.18.13.1090)
2 – 320 GB SATA drives
In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
I want to all thumbnails to have White Background.
I can Open and save each file but that will take me for ever.
Can it be done with iLogic?
I'm running Inventor 2008 SP2. Each time I open the assembly 2 subassemblies always explode. You can see the red and blue subs in the attached picture. I thought this was supposed to be fixed by now. Actually I thought this was supposed to be fixed in R11 a long time ago. When I grab and drag either component, everything snaps back to where it's supposed to be.
If this isn't fixed (along with a laundry list of stuff that's been broken since R10) you will be losing customers. This and all the other bugs have cost me countless hours in lost productivity.
In Inventor 2012 I know that it is possible to arrange assembly components in a circular or rectangular pattern. But is there a way to arrange these components in an oval pattern?
View 5 Replies View RelatedI need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
Here is the history. I originally created a part with multiple solid bodies.
After creating it I was told we needed to make it an assembly. So what I did instead of recreating each component I called up the original multi-bodied part and did save as copies.
Then deleted the portions of the model I didn't need with only the part needed left.
Then I took all of those parts and assembled them together to form an assembly.
Now, here inlies the problem. When I go to make a drawin gof this assembly all of the balloons are coming up with the same item number as it was when it was a multi-bodied part.
It is clearly an assembly based on the model tree and the file extension.
I have a machine assembly with old part naming. Now we have a new part naming system. So i am supposed to rename all existing parts, assemblies to new naming system.
E.g. : A machine assembly with old names (lets say part1, part2..... part1000). It has to be renamed to new names (say item1, item2.....item1000).
"part1" should be renamed as "item1" and so on.
Design assistant is not a good option because its a lot of manual work, its same issue with using Vault.
Currently I have some code which loops through all sub components of an assembly and sub assemblies. However I only need sub components inside the top level assembly and not any sub-assemblies. Is there an easy way to acomplish this?
This code will list all sub components inside an assembly when a drawing is open.
Dim oDocument As Document Set oDocument = ThisApplication.ActiveDocument Dim oRefDocs As DocumentsEnumerator Set oRefDocs = oDocument.AllReferencedDocuments
Dim oRefDoc As Document
For Each oRefDoc In oRefDocs debug.print oRefDoc.FullDocumentName Next
It seems to me that the basic exclude component no longer works when deriving assemblies. If I cycle through components it is not possible to get the Grey circle with the backslash through it?
IV2010 SP2
Dell Precision PWS690
Quadro FX3500
DirectX 178.46
Spaceball 5000
Intel Xeon 3GHz
4GB RAM
WinXP Pro SP3
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
I'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
I'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
I want to create numerous custom properties for a part. Some of these will be the same for all instances of the part (i.e. vendor, part number, etc). But some have to vary from instance to instance.
So, as an example - if I place 5 identical tanks into my assembly I need to assign unique text entries for each of these 5 instances (i.e. TANK-01, TANK-02, TANK-03, etc)
Furthermore, all these textual properties have to be able to be shown physically on the part (for identification on plots) and extractable for BOMs, etc. It seems that any custom i Properties I set up are global for all instances of the part.
Long time Autocad user but now am moving most of my work across to Autodesk Inventor.
Some of the work I do is with companies that their parts are standard components that will not change.
So I am using Inventor to automate the drawings based on their requirements. For example if it needs to be 4m high. then to use 2 x 2m sections. Currently I have create different assemblies of the different potential heights that I can switch between using ilogic but I need to be able to shift the top truss arch depending on how high the truss is.
I was just wondering how to place a component into an assembly using ilogic? If this is possible, is there also an option to choose if iMates will be generated?
I would ideally like to place a list of components into an assembly, the list with probably exist in excel, then have iMates set to 'Automatically generate iMates on place' so that my assembly assembles automatically.
Inventor 2013 Certified Professional
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
I am currently working on a parametric assembly using i Logic to control the size of the components as well as patterns. However, I have hit a road block in trying to figure out how to write a rule for resizing the last roof sheet in this assembly pictured below to be even with the frame. The rule below is what controls the roof sheet pattern based on the frame length. The problem I am continually running into is how do you modify a part which is in an element within the pattern without having it affect the rest of the parts in the pattern since they all refer to part. I can get since it is hard to find information on i Logic.
Roof_Pattern_Spacing = Roof_Sheet_Width
Roof_Pattern_Count=Ceil(Parameter("Length")/Parameter("Sheet Metal Roof Section:1", "Roof_Sheet_Width"))
(Note: The red line symbolizes where I would like to have the roof sheet end.)
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
I have tried the Frame Analysis for the first time and quit from this option as requested.
BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.
Here is some bug. [URL] ....
How can I make groups for similar components of assembly such as picture below?
View 2 Replies View RelatedIs it possible to select a group of parts in an assembly and then see the weight of just these parts or the centre of gravity of the selected group?
View 7 Replies View RelatedI want to export from Revit 2013 to AutoCAD so that each component of a wall assembly exports to a separate AutoCAD layer. For example on a simple stud wall with drywall on both sides I would like the interior lines on different layers than the lines for the outside faces. Is this possible?
View 2 Replies View RelatedI am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.