AutoCAD Inventor :: Assembly With Flexible Components Explodes
Mar 28, 2008
I'm running Inventor 2008 SP2. Each time I open the assembly 2 subassemblies always explode. You can see the red and blue subs in the attached picture. I thought this was supposed to be fixed by now. Actually I thought this was supposed to be fixed in R11 a long time ago. When I grab and drag either component, everything snaps back to where it's supposed to be.
If this isn't fixed (along with a laundry list of stuff that's been broken since R10) you will be losing customers. This and all the other bugs have cost me countless hours in lost productivity.
View 9 Replies
ADVERTISEMENT
Nov 12, 2013
I have a sub-assembly that is flexible, (constrained properly, not grounded) and when I try to move it in the main assembly, I get the "universal NO" symbol attached to my cursor. There are no constraints preventing the movement in the sub, since I can move it however I want when the sub is opened.
Inv 2011
View 4 Replies
View Related
Jan 11, 2012
I am wanting to create an assembly that I can manipulate and `pull about'.
To describe what I have and I want to acheive try and picture this very simplistic layout :-
A length of hose 50 meters long.
Another length of 50m long hose 2 meters directly below it.
The 2 lengths of hose rigidly tied together at 2m intervals with a small diameter solid bar and clamps around the hose.
What I need to acheive is :-
An assembly showing the above items in a long straight 50m run.
(I have no problems with creating this assembly.)
From there though I then need to be able to create an `S' shape, with the hose staying at a fixed radius where it is rolled to form that shape, both hoses must stay inline with each other at all times.
If you can imagine how a hose would react as you rolled it in reality I want to try and replicate that within my assembly if it is possible?
I realise I could create one long flat assembly then create another seperate assembly showing it in it's rolled up `S' shaped state but that is not what I am wanting.
View 1 Replies
View Related
Dec 7, 2012
Is there flexible part option in assembly? I have a shaft for which i want to vary my diameter in the assembly without affecting the part.
Is it possible in Inventor? Its there in ProE. Its called "Flexible".
View 9 Replies
View Related
Jan 8, 2013
I'm going through some customer equipment models and setting them up in my library for referencing. For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.
One such machine is a simple positioner. It's got a linear slide for "X" movement that's got an arm on a mounting plate. The slide has some amount of travel, say 500mm or so. And the mounting plate has 5 sets of mounting holes. So the arm can have four bolts removed and be mounted in any (1) of (5) different locations. This is in addition to the slide's travel.
When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.
So I can setup (5) different positional reps for the mounting hole configs. That's easy. With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations? For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.
Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 2 Replies
View Related
Jan 5, 2014
Usually what I do is download a 3D CAD part from McMaster Carr or some other place and start from scratch trying to recreate the part or, in this case, the assembly. I'm working on modeling a simple swing-arm type of machine I've made in the past and the I've been able to recreate all of the parts with their proper ranges of motion except one. It's an Inline Ball Joint Linkage that has a rubber boot around it to keep the dust out and possibly grease in. I want to know if it is possible to model the rubber boot so that it would mimic real life movement. Right now, the boot is basically a rigid cylinder and as the linkage swivels, the solid bodies clip through each other.
I've been able to make a flexible hose type of assembly as shown here: [URL]... However, creating a 3D drawing with a spline that attaches to work points on the other assemblies causes the Ball Joint to no longer work. It will only rotate as opposed to swiveling.
View 5 Replies
View Related
May 7, 2012
Is there any way to group assembly components?I'm aiming at a live mass calculation for different level of details/design views.In this case I'v got an assembly with about a ton of stainless steel spread out on different subassemblies.
I have made representations showing only the welded stainless steel and I would like the weight of these to appear in the partlist. Not the weight of the complete subassemblies.
View 2 Replies
View Related
Mar 15, 2013
I am working on a large plant piping project and while I've seen this behavior before I've never seen it this bad.
Attached is a screen shot of a small portion of the assembly drawing in which you can see a good example of what I'm dealing with.
At the top you can see a weld neck flange that appears to be attached to air where there should be an elbow. In the middle you can see that on one side of the elbow there is missing geometry.
At the bottom is another flange that attached to air where there should be an elbow. This drawing is littered with these errors and as such is unsuitable for even a reference document.
I have turned visibility of these components off and on without resolution. I have turned on tangent and interference edges without resolution.
I have translated a copy to ACAD to see if it's simply graphical but the ACAD file shows the same errors. I have checked parallel and perpendicularity and all is well.
Inventor 2012 Pro 64bit (Build 219 - SP2)
Vault 2012 Pro Admin
Windows 7 Pro 64bit
Quad Core processor 2.26 Ghz
16 GB DDR3 RAM
1.5 GB Nvidia Quadro FX 4800 (Driver Version 9.18.13.1090)
2 – 320 GB SATA drives
View 3 Replies
View Related
Mar 25, 2013
In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
View 3 Replies
View Related
Oct 6, 2011
I want to all thumbnails to have White Background.
I can Open and save each file but that will take me for ever.
Can it be done with iLogic?
View 8 Replies
View Related
Apr 9, 2013
In Inventor 2012 I know that it is possible to arrange assembly components in a circular or rectangular pattern. But is there a way to arrange these components in an oval pattern?
View 5 Replies
View Related
Jul 26, 2012
I need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
View 3 Replies
View Related
Jan 16, 2012
Here is the history. I originally created a part with multiple solid bodies.
After creating it I was told we needed to make it an assembly. So what I did instead of recreating each component I called up the original multi-bodied part and did save as copies.
Then deleted the portions of the model I didn't need with only the part needed left.
Then I took all of those parts and assembled them together to form an assembly.
Now, here inlies the problem. When I go to make a drawin gof this assembly all of the balloons are coming up with the same item number as it was when it was a multi-bodied part.
It is clearly an assembly based on the model tree and the file extension.
View 9 Replies
View Related
Apr 16, 2013
I have a machine assembly with old part naming. Now we have a new part naming system. So i am supposed to rename all existing parts, assemblies to new naming system.
E.g. : A machine assembly with old names (lets say part1, part2..... part1000). It has to be renamed to new names (say item1, item2.....item1000).
"part1" should be renamed as "item1" and so on.
Design assistant is not a good option because its a lot of manual work, its same issue with using Vault.
View 4 Replies
View Related
Jul 6, 2012
Currently I have some code which loops through all sub components of an assembly and sub assemblies. However I only need sub components inside the top level assembly and not any sub-assemblies. Is there an easy way to acomplish this?
This code will list all sub components inside an assembly when a drawing is open.
Dim oDocument As Document Set oDocument = ThisApplication.ActiveDocument Dim oRefDocs As DocumentsEnumerator Set oRefDocs = oDocument.AllReferencedDocuments
Dim oRefDoc As Document
For Each oRefDoc In oRefDocs debug.print oRefDoc.FullDocumentName Next
View 7 Replies
View Related
Jan 12, 2010
It seems to me that the basic exclude component no longer works when deriving assemblies. If I cycle through components it is not possible to get the Grey circle with the backslash through it?
IV2010 SP2
Dell Precision PWS690
Quadro FX3500
DirectX 178.46
Spaceball 5000
Intel Xeon 3GHz
4GB RAM
WinXP Pro SP3
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 3 Replies
View Related
Oct 25, 2011
I'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
View 5 Replies
View Related
Nov 14, 2011
I'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
View 2 Replies
View Related
Apr 15, 2013
I want to create numerous custom properties for a part. Some of these will be the same for all instances of the part (i.e. vendor, part number, etc). But some have to vary from instance to instance.
So, as an example - if I place 5 identical tanks into my assembly I need to assign unique text entries for each of these 5 instances (i.e. TANK-01, TANK-02, TANK-03, etc)
Furthermore, all these textual properties have to be able to be shown physically on the part (for identification on plots) and extractable for BOMs, etc. It seems that any custom i Properties I set up are global for all instances of the part.
View 1 Replies
View Related
Oct 6, 2013
Long time Autocad user but now am moving most of my work across to Autodesk Inventor.
Some of the work I do is with companies that their parts are standard components that will not change.
So I am using Inventor to automate the drawings based on their requirements. For example if it needs to be 4m high. then to use 2 x 2m sections. Currently I have create different assemblies of the different potential heights that I can switch between using ilogic but I need to be able to shift the top truss arch depending on how high the truss is.
View 1 Replies
View Related
Feb 15, 2013
I was just wondering how to place a component into an assembly using ilogic? If this is possible, is there also an option to choose if iMates will be generated?
I would ideally like to place a list of components into an assembly, the list with probably exist in excel, then have iMates set to 'Automatically generate iMates on place' so that my assembly assembles automatically.
Inventor 2013 Certified Professional
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 7 Replies
View Related
Jan 28, 2013
I am currently working on a parametric assembly using i Logic to control the size of the components as well as patterns. However, I have hit a road block in trying to figure out how to write a rule for resizing the last roof sheet in this assembly pictured below to be even with the frame. The rule below is what controls the roof sheet pattern based on the frame length. The problem I am continually running into is how do you modify a part which is in an element within the pattern without having it affect the rest of the parts in the pattern since they all refer to part. I can get since it is hard to find information on i Logic.
Roof_Pattern_Spacing = Roof_Sheet_Width
Roof_Pattern_Count=Ceil(Parameter("Length")/Parameter("Sheet Metal Roof Section:1", "Roof_Sheet_Width"))
(Note: The red line symbolizes where I would like to have the roof sheet end.)
View 2 Replies
View Related
Jun 14, 2013
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
View 9 Replies
View Related
Jan 6, 2012
I have tried the Frame Analysis for the first time and quit from this option as requested.
BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.
Here is some bug. [URL] ....
View 6 Replies
View Related
Jul 24, 2012
I dont know any way of making a flexible sketch symbol. say the way hatch can be flexed in autocad.
is that something which can be done in inventor.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 4 Replies
View Related
Aug 9, 2011
I have never modelled hydraulic hoses.
In particular I’d like to model hydraulic hoses that are flexible and can change with different position representations.
Inventor Premium 2012 - SP1 Installed
HP 8760w I7-740M Laptop
Windows 7 Professional 64
12 Gb DDR SDRAM
AMD FirePro M5950 Graphics Card
View 9 Replies
View Related
Jun 20, 2013
What I am trying to do is place a hinge as a subassembly. I know in Solidworks there is an option to add it as a rigid or non rigid assembly. I have seen an option for flexible when you right click on assemblies that allow parts to be moved which is what I need but the hinge file I have from the company that sells them doesn't have that option when I right click on it and I need the hinge to be able to rotate in the model to simulate the hinge opening/ closing.
View 6 Replies
View Related
Dec 4, 2005
I need to model up a convoluted flexible hose as a component part for use in an assembly. What is the best approach to creating this with a realistic and natural look?
View 9 Replies
View Related
Oct 17, 2012
I'm trying to make this assembly flexible in that the bar will flex so the "s-clip" can hold the 2 handles together. I read some of the forums about the scissors assembly in the autodesk folders and I can see it working in that assembly btu can't figure out how to make it apply to mine. It is basically one of those camping grills that makes hot sandwiches or pies.
View 6 Replies
View Related
Feb 22, 2013
I want to put a flexible hose into an assembly in different places.
In the real world it would be the same part, but as the hose would needs to bend at different angles for the different positions I would need different models.
I know I can group components with the same part number in the Parts List, but how do I make sure the components are seen by Vault and other users as being the same component ?
Currently using Inv 2011sp2 Pro and Vault 2011. But I don't have much experience of using Pro
View 2 Replies
View Related
Oct 2, 2012
The company I work for manufactures safety covers of all types. Some are pretty easy to model. The ones made from folded fabric,....not so much.
I have taken a couple of photos and uploaded them so that you could see what I'm trying to model.
As you can see from the photo, it's an accordion like cover that is "U-Shaped". You would install this over a linear rail and have one end anchored to the frame and one end anchored to the carriage. So it would collapse and expand as the carriage moves back and forth.
We call the convolutions "vees" (obviously because they look like the letter V). When you compress the cover the Vee Depth increases. And when you expand the cover it will decrease. The folded section at the ends, at the small "legs" is where I have the difficulty. It's sort of hard to explain. That's why I uploaded the photos.
I'd like to be able to make a single "Vee", and have it have adjustable constraints so that I can expand or contract the cover by adjusting one number.
View 3 Replies
View Related
