AutoCAD Inventor :: Not Possible To Exclude Components With Derived Assembly?
Jan 12, 2010
It seems to me that the basic exclude component no longer works when deriving assemblies. If I cycle through components it is not possible to get the Grey circle with the backslash through it?
IV2010 SP2
Dell Precision PWS690
Quadro FX3500
DirectX 178.46
Spaceball 5000
Intel Xeon 3GHz
4GB RAM
WinXP Pro SP3
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 3 Replies
ADVERTISEMENT
Jul 14, 2013
It says i can exclude parts from the assembly, when i insert it as a derived part, but the exclude button is greyed in the insert derived part dialog box.
View 4 Replies
View Related
Jun 14, 2013
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
View 9 Replies
View Related
Jan 16, 2013
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies
View Related
Nov 6, 2011
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies
View Related
Jul 19, 2012
I have a vba project that can extract an assembly BOM.
However, it does not output derived parts. What is wrong with my code, shown in the attached file?
What I am trying to do is create a ipt file of a "Laser-Cut" component. Use this component to make another component with drilled, tapped holes in it. Then use this plate, containing the drilled and tapped holes in an assembly.
I need to output this "Laser-Cut" part in my vba created BOM. Is it possible?
View 1 Replies
View Related
Aug 31, 2012
I want to un check this associativity thru VBA
' Create Derived Assembly Definition for the file Filename
Dim oDerivedAssem As DerivedAssemblyDefinition
Set oDerivedAssem = oPartCompDef.ReferenceComponents. _
DerivedAssemblyComponents.CreateDefinition(Filename)
oDerivedAssem. ?
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 1 Replies
View Related
Jun 24, 2012
I've derived an assembly into a part file. On inserting an i feature, Why can't I select a face of the single composite body?
You can create a sketch on a face, but not insert an i feature on a face.
View 9 Replies
View Related
Jan 30, 2013
I have found an strange behaviour of derivin part from assembly when position repre is used.
There are lost or moved some part. It seems that this is another bug in Inventor 2013SP1.1.
View 1 Replies
View Related
Dec 4, 2007
I am having some trouble with this quick VBA app, I want a utility that can traverse all the parts in a top level assembly and suppress the link to each derived part (multiple) in all the parts in the assembly.
I have played with the following
Public Sub SuppressLink()
Dim partdoc As PartDocument
Set partdoc = ThisApplication.ActiveDocument
partdoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Item(1).SuppressLinkToFile = True
End Sub
Which works, but only on one part file, and only on the first derived part. Is there any easy way to make this work on ALL the dervived links and every single part inside an assembly?
View 9 Replies
View Related
May 17, 2011
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 9 Replies
View Related
Oct 7, 2013
I am trying to unfold a part created from a derived assembly like I usually do… why in the world will it not unfold, and show a preview of the unfolded in the other direction??
At first all was working… until I added a part (see the circled item in picture), and I don’t have any problem usually!
View 6 Replies
View Related
May 7, 2012
Is there any way to group assembly components?I'm aiming at a live mass calculation for different level of details/design views.In this case I'v got an assembly with about a ton of stainless steel spread out on different subassemblies.
I have made representations showing only the welded stainless steel and I would like the weight of these to appear in the partlist. Not the weight of the complete subassemblies.
View 2 Replies
View Related
Mar 15, 2013
I am working on a large plant piping project and while I've seen this behavior before I've never seen it this bad.
Attached is a screen shot of a small portion of the assembly drawing in which you can see a good example of what I'm dealing with.
At the top you can see a weld neck flange that appears to be attached to air where there should be an elbow. In the middle you can see that on one side of the elbow there is missing geometry.
At the bottom is another flange that attached to air where there should be an elbow. This drawing is littered with these errors and as such is unsuitable for even a reference document.
I have turned visibility of these components off and on without resolution. I have turned on tangent and interference edges without resolution.
I have translated a copy to ACAD to see if it's simply graphical but the ACAD file shows the same errors. I have checked parallel and perpendicularity and all is well.
Inventor 2012 Pro 64bit (Build 219 - SP2)
Vault 2012 Pro Admin
Windows 7 Pro 64bit
Quad Core processor 2.26 Ghz
16 GB DDR3 RAM
1.5 GB Nvidia Quadro FX 4800 (Driver Version 9.18.13.1090)
2 – 320 GB SATA drives
View 3 Replies
View Related
Mar 25, 2013
In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
View 3 Replies
View Related
Oct 6, 2011
I want to all thumbnails to have White Background.
I can Open and save each file but that will take me for ever.
Can it be done with iLogic?
View 8 Replies
View Related
Mar 28, 2008
I'm running Inventor 2008 SP2. Each time I open the assembly 2 subassemblies always explode. You can see the red and blue subs in the attached picture. I thought this was supposed to be fixed by now. Actually I thought this was supposed to be fixed in R11 a long time ago. When I grab and drag either component, everything snaps back to where it's supposed to be.
If this isn't fixed (along with a laundry list of stuff that's been broken since R10) you will be losing customers. This and all the other bugs have cost me countless hours in lost productivity.
View 9 Replies
View Related
Apr 9, 2013
In Inventor 2012 I know that it is possible to arrange assembly components in a circular or rectangular pattern. But is there a way to arrange these components in an oval pattern?
View 5 Replies
View Related
Jul 26, 2012
I need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
View 3 Replies
View Related
Jan 16, 2012
Here is the history. I originally created a part with multiple solid bodies.
After creating it I was told we needed to make it an assembly. So what I did instead of recreating each component I called up the original multi-bodied part and did save as copies.
Then deleted the portions of the model I didn't need with only the part needed left.
Then I took all of those parts and assembled them together to form an assembly.
Now, here inlies the problem. When I go to make a drawin gof this assembly all of the balloons are coming up with the same item number as it was when it was a multi-bodied part.
It is clearly an assembly based on the model tree and the file extension.
View 9 Replies
View Related
Apr 16, 2013
I have a machine assembly with old part naming. Now we have a new part naming system. So i am supposed to rename all existing parts, assemblies to new naming system.
E.g. : A machine assembly with old names (lets say part1, part2..... part1000). It has to be renamed to new names (say item1, item2.....item1000).
"part1" should be renamed as "item1" and so on.
Design assistant is not a good option because its a lot of manual work, its same issue with using Vault.
View 4 Replies
View Related
Jul 6, 2012
Currently I have some code which loops through all sub components of an assembly and sub assemblies. However I only need sub components inside the top level assembly and not any sub-assemblies. Is there an easy way to acomplish this?
This code will list all sub components inside an assembly when a drawing is open.
Dim oDocument As Document Set oDocument = ThisApplication.ActiveDocument Dim oRefDocs As DocumentsEnumerator Set oRefDocs = oDocument.AllReferencedDocuments
Dim oRefDoc As Document
For Each oRefDoc In oRefDocs debug.print oRefDoc.FullDocumentName Next
View 7 Replies
View Related
Oct 25, 2011
I'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
View 5 Replies
View Related
Nov 14, 2011
I'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
View 2 Replies
View Related
Apr 15, 2013
I want to create numerous custom properties for a part. Some of these will be the same for all instances of the part (i.e. vendor, part number, etc). But some have to vary from instance to instance.
So, as an example - if I place 5 identical tanks into my assembly I need to assign unique text entries for each of these 5 instances (i.e. TANK-01, TANK-02, TANK-03, etc)
Furthermore, all these textual properties have to be able to be shown physically on the part (for identification on plots) and extractable for BOMs, etc. It seems that any custom i Properties I set up are global for all instances of the part.
View 1 Replies
View Related
Oct 6, 2013
Long time Autocad user but now am moving most of my work across to Autodesk Inventor.
Some of the work I do is with companies that their parts are standard components that will not change.
So I am using Inventor to automate the drawings based on their requirements. For example if it needs to be 4m high. then to use 2 x 2m sections. Currently I have create different assemblies of the different potential heights that I can switch between using ilogic but I need to be able to shift the top truss arch depending on how high the truss is.
View 1 Replies
View Related
Feb 15, 2013
I was just wondering how to place a component into an assembly using ilogic? If this is possible, is there also an option to choose if iMates will be generated?
I would ideally like to place a list of components into an assembly, the list with probably exist in excel, then have iMates set to 'Automatically generate iMates on place' so that my assembly assembles automatically.
Inventor 2013 Certified Professional
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 7 Replies
View Related
Jan 28, 2013
I am currently working on a parametric assembly using i Logic to control the size of the components as well as patterns. However, I have hit a road block in trying to figure out how to write a rule for resizing the last roof sheet in this assembly pictured below to be even with the frame. The rule below is what controls the roof sheet pattern based on the frame length. The problem I am continually running into is how do you modify a part which is in an element within the pattern without having it affect the rest of the parts in the pattern since they all refer to part. I can get since it is hard to find information on i Logic.
Roof_Pattern_Spacing = Roof_Sheet_Width
Roof_Pattern_Count=Ceil(Parameter("Length")/Parameter("Sheet Metal Roof Section:1", "Roof_Sheet_Width"))
(Note: The red line symbolizes where I would like to have the roof sheet end.)
View 2 Replies
View Related
Jan 6, 2012
I have tried the Frame Analysis for the first time and quit from this option as requested.
BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.
Here is some bug. [URL] ....
View 6 Replies
View Related
Sep 11, 2013
I want to export from Revit 2013 to AutoCAD so that each component of a wall assembly exports to a separate AutoCAD layer. For example on a simple stud wall with drywall on both sides I would like the interior lines on different layers than the lines for the outside faces. Is this possible?
View 2 Replies
View Related
Aug 31, 2013
I am using Inventor 2012 64 bit with Win 7.
We have a lot of drawing that has some extra sheet for ref. and Inventor let me exclude count and print from those extra sheet. This work fine but when we check-in the drawing to vault it update or publish all sheet to dwf. This is very compass for us because we full the dwf file from vault to release and the sheet count is different than the print out.
Is there a way to EXCLUDE those sheet when check-in or update dwf?
View 1 Replies
View Related
