I dont know any way of making a flexible sketch symbol. say the way hatch can be flexed in autocad.
is that something which can be done in inventor.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I need to create skech symbols to illustrate mounting schemes, so without scale. I need to put dimensions in the symbol, which are only annotation, not parametric. This dimension must be visible once the symbol inserted on the sheet.
When I create the dimension in the sketch, it is always a paramertric dimension, which drve the drawing and is not visible in the inserted symbol.. How can I do to have only an annotation ? (I precise the option "sketch only" does not function on dimensions)
Is there a way to turn an existing sketch into a symbol, in an idw, so that it can be reused?
View 3 Replies View RelatedI am trying to create a sketch symbol with info about the first view on a sheet. It seems to work fine with any of the properties built in, but I am trying to include the scale. There are lots of posts about putting scale in a title block, but I can't seem to get the same code to work for a sketch symbol.
View 5 Replies View RelatedHow do i target a specific sketch symbol within a view and control it with iLogic?
View 9 Replies View RelatedIs there a way to make a sketched symbol "stick" to a view? I'm sure there is, but I can't remember how. We're using IV R2011 @ SP2.
View 4 Replies View RelatedIs it possible to modify a sketch symbol that has existing prompted text while keeping the existing prompted text? For example, I have a sketch symbol that is placed on every detail on the drawing. We could have 8 details on a drawing.
This sketch symbol uses prompted text to fill in the relevant information for each detail. Is there a way to change the sketch symbol globally and then copy the sketch symbol in to each drawing without losing the prompted text? Currently I have to modify the sketch symbol within each drawing. To keep the prompted text.
I want Inventor to add sketch symbols automaticly on cordinates according to a Custom Text Paramater
for example I have created Custom Multi Value Text User parameter Approved & Not Approved or Plate Work Notes & SteelWork Notes wich each represent diffrent sketch symbols that needs to be placed out base on the value selected. Each sheet consist of diffrent sketch symbols
I am trying to get Sketched Symbols with leaders to align.
I have a sketched symbol defined that has connection points defined at the outer quadrants. If the symbol doesn't have a leader they snap together at the connection points without any problems.
If the symbols have a leader they either won't snap, or jump to a random location depending on what grip you select to move.
The following video image shows the problems with the symbols with leaders.
insert a sketch symbol to a specific coordinate on a dwg border (top middle of dwg)
Workflow needed is as follows
Copy Sketched symbol folder from Standard.dwg from (C:UsersPublicDocumentsAutodeskInventor 2012Templates.Paste into open dwg document and yes to all to overide symbolsPlace a named sketched symbol from drawing resources folder ie (PRELIMINARY) to top center of all sheets within documentreturn to first sheet when complete My new dwg has symbols in correct place so any new dwgs this is ok but we need to add it to hundreds of dwgs when opened or revised,so i want to tie this to external rule and trigger on save event.
ACA2011My dimensions seem to be fickle with regard to snaping. I've got my OSNAPs on, and I can't snap to a structural beam above, nor can I snap to a window sill. I can dim to the mid point of the window sill by using .x & .y filters, and can only snap to the axis line on a beam. Is there a toggle somewhere?
View 4 Replies View RelatedHow would i insert the "variable name" of a custom iProp to a sketched symbol definition (in an idw)?
I can plonk the value of the iProp in no worries, but to make it "live" is a bit beyond me...
Sub WeldNote()On Error Resume NextDim oDoc As DrawingDocumentDim SketchedSym As SketchedSymbolDefinitionDim oNoteDef As SketchedSymbolDefinitionDim oDefSketch As SketchDim oTextbox As TextBoxDim SNewText As StringDim sNoteText As StringDim oReffedDoc As DocumentDim lReffedWeldType As Long'Err.ClearIf
[Code].....
My iLogic ability is quite limited outside of what I use regularly?
I am trying to change the font style in every text definition in all my sketch symbols in one go. Actually I have started it based on only a selection set but I would be happy with just all symbols too. Below is where I got to, I am stuck on the For Each line to cover each text box in the symbol. Some of the other syntax may not be right either but I can't test it all the way through.
Dim oDoc As DrawingDocument: oDoc = ThisApplication.ActiveDocumentDim oSheet As Sheet: oSheet = oDoc.ActiveSheetDim i As LongDim oSymDef As SketchedSymbolDefinition: oSymDef = oDoc.SketchedSymbolDefinitions.Item(i)Dim oText As TextBoxesFor i = 1 To oDoc.SelectSet.CountFor Each oText In ............oSymDef.TextBoxes.Item(i).FormattedText ="<StyleOverride Font='ARIAL'>...< /StyleOverride>"NextNextInventorVb.DocumentUpdate()
Also the XML style override is not complete if this is the only way to achieve this result.
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
What I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
I have a sub-assembly that is flexible, (constrained properly, not grounded) and when I try to move it in the main assembly, I get the "universal NO" symbol attached to my cursor. There are no constraints preventing the movement in the sub, since I can move it however I want when the sub is opened.
Inv 2011
I am wanting to create an assembly that I can manipulate and `pull about'.
To describe what I have and I want to acheive try and picture this very simplistic layout :-
A length of hose 50 meters long.
Another length of 50m long hose 2 meters directly below it.
The 2 lengths of hose rigidly tied together at 2m intervals with a small diameter solid bar and clamps around the hose.
What I need to acheive is :-
An assembly showing the above items in a long straight 50m run.
(I have no problems with creating this assembly.)
From there though I then need to be able to create an `S' shape, with the hose staying at a fixed radius where it is rolled to form that shape, both hoses must stay inline with each other at all times.
If you can imagine how a hose would react as you rolled it in reality I want to try and replicate that within my assembly if it is possible?
I realise I could create one long flat assembly then create another seperate assembly showing it in it's rolled up `S' shaped state but that is not what I am wanting.
I have never modelled hydraulic hoses.
In particular I’d like to model hydraulic hoses that are flexible and can change with different position representations.
Inventor Premium 2012 - SP1 Installed
HP 8760w I7-740M Laptop
Windows 7 Professional 64
12 Gb DDR SDRAM
AMD FirePro M5950 Graphics Card
What I am trying to do is place a hinge as a subassembly. I know in Solidworks there is an option to add it as a rigid or non rigid assembly. I have seen an option for flexible when you right click on assemblies that allow parts to be moved which is what I need but the hinge file I have from the company that sells them doesn't have that option when I right click on it and I need the hinge to be able to rotate in the model to simulate the hinge opening/ closing.
View 6 Replies View RelatedThe attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedIs there flexible part option in assembly? I have a shaft for which i want to vary my diameter in the assembly without affecting the part.
Is it possible in Inventor? Its there in ProE. Its called "Flexible".
I need to model up a convoluted flexible hose as a component part for use in an assembly. What is the best approach to creating this with a realistic and natural look?
View 9 Replies View RelatedI'm trying to make this assembly flexible in that the bar will flex so the "s-clip" can hold the 2 handles together. I read some of the forums about the scissors assembly in the autodesk folders and I can see it working in that assembly btu can't figure out how to make it apply to mine. It is basically one of those camping grills that makes hot sandwiches or pies.
View 6 Replies View RelatedI want to put a flexible hose into an assembly in different places.
In the real world it would be the same part, but as the hose would needs to bend at different angles for the different positions I would need different models.
I know I can group components with the same part number in the Parts List, but how do I make sure the components are seen by Vault and other users as being the same component ?
Currently using Inv 2011sp2 Pro and Vault 2011. But I don't have much experience of using Pro
I'm running Inventor 2008 SP2. Each time I open the assembly 2 subassemblies always explode. You can see the red and blue subs in the attached picture. I thought this was supposed to be fixed by now. Actually I thought this was supposed to be fixed in R11 a long time ago. When I grab and drag either component, everything snaps back to where it's supposed to be.
If this isn't fixed (along with a laundry list of stuff that's been broken since R10) you will be losing customers. This and all the other bugs have cost me countless hours in lost productivity.
The company I work for manufactures safety covers of all types. Some are pretty easy to model. The ones made from folded fabric,....not so much.
I have taken a couple of photos and uploaded them so that you could see what I'm trying to model.
As you can see from the photo, it's an accordion like cover that is "U-Shaped". You would install this over a linear rail and have one end anchored to the frame and one end anchored to the carriage. So it would collapse and expand as the carriage moves back and forth.
We call the convolutions "vees" (obviously because they look like the letter V). When you compress the cover the Vee Depth increases. And when you expand the cover it will decrease. The folded section at the ends, at the small "legs" is where I have the difficulty. It's sort of hard to explain. That's why I uploaded the photos.
I'd like to be able to make a single "Vee", and have it have adjustable constraints so that I can expand or contract the cover by adjusting one number.
I am trying to create a FLEXIBLE object (like rope/cable). Diameter = 10mm, Length = 3m.How do I do it?
View 3 Replies View RelatedI'm going through some customer equipment models and setting them up in my library for referencing. For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.
One such machine is a simple positioner. It's got a linear slide for "X" movement that's got an arm on a mounting plate. The slide has some amount of travel, say 500mm or so. And the mounting plate has 5 sets of mounting holes. So the arm can have four bolts removed and be mounted in any (1) of (5) different locations. This is in addition to the slide's travel.
When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.
So I can setup (5) different positional reps for the mounting hole configs. That's easy. With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations? For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.
Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
I need to make a 1/8" diameter flexible hose, but the sizes listed for the Parker Hydraulic Hose only go down to 1/4". The closest solution I could find is here:
[URL]........
Here is what I did:
In my assembly, click "Place From Content Center"
Find "Parker Hydraulic Hose"
When I right click on it, the only selection is "Add to Favorites"
Double click on "Parker Hydraulic Hose"
Go to "Table View" tab
Right click on a row, but there is no "Input" selection.
Usually what I do is download a 3D CAD part from McMaster Carr or some other place and start from scratch trying to recreate the part or, in this case, the assembly. I'm working on modeling a simple swing-arm type of machine I've made in the past and the I've been able to recreate all of the parts with their proper ranges of motion except one. It's an Inline Ball Joint Linkage that has a rubber boot around it to keep the dust out and possibly grease in. I want to know if it is possible to model the rubber boot so that it would mimic real life movement. Right now, the boot is basically a rigid cylinder and as the linkage swivels, the solid bodies clip through each other.
I've been able to make a flexible hose type of assembly as shown here: [URL]... However, creating a 3D drawing with a spline that attaches to work points on the other assemblies causes the Ball Joint to no longer work. It will only rotate as opposed to swiveling.
I am working on a hinged door assembly that consists of a frame sub-assembly, and 2 door panel sub-assemblies that each have 4 hinged sub-assemblies that I have made flexible. I am trying to figure out how to constrain these doors so that they "operate" correctly and not spin 360 degrees when I manipulate them in the overall assembly.
View 6 Replies View RelatedI want to put a cable tray going from a sliding door to a fixed piece of steelwork. When the door opens and closes, I want the cable tray to adjust to suit the sliding door. I'll upload the file that I have made. When i drag the sketch it all moves accordingly, but when I placed in the assembly and make it adaptive it does nothing, it will not constrain and it will only bring up the errors.
Inventor 2012
Windows 7 64-Bit SP1
Intel(R) Xeon(R) CPU X5570 @ 2.93GHz
NVIDIA Quadro FX 3800 (Avail. Graphics Memory 4067MB - Ded. 1024 MB)
12 GB RAM