I would like to try and import a .tds and .dat file that should contain an aerial photograph and a location in the real world of that photograph. I would then like to create a map over the photograph with lines, circles, etc. that will also be in the same coordinates as the photograph.
View 8 RepliesI have a Civil3D file with Drawing Settings = WGS84 UTM-Zone44 North Map3D coordinate system = WGS84 UTM-Zone44 North a USGS DEM from HYDROsheds data set (tile = N40E80) also note this DEM is a folder of multiple ADF files when using FDO provider the DEM comes in just fine but it lands in the wrong location thousands of kilometers away.
When I load the same shape files into ArcMAP10 with spatial reference as WGS84 UTM-Zone44 North everything lines up perfectly.
The header prj.adf file is this:
PROJECTION GEOGRAPHIC
UNITS DD
DATUM WGS84
PARAMETERS
so how do I make it come into Map3D correctly?
Is it possible to washout an image with civil 3d 2013? We have a black and white printer and i need to fade an aerial out so that the text will be visable.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Why does my .tif aerial color darken and blue patches appear on it when it gets rotated, either thru user rotation or thru coordinate transformation?
View 5 Replies View RelatedI've been working on drawings (originally last year done in Civil 2013 with Geographic locations included) in 2014 and have found that when switching the Map Aerial on the location is very incorrect.
By using the Remove Location tool and assigning the Coordinate system via the Drawing Properties, the aerial Map is located perfectly...
Why it does this and haven't tried with other drawings in a different project to the one I'm workling on.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
How can I screen back an aerial that is being x-referenced into a drawing?
View 5 Replies View RelatedI can't zoom into a Geolocation Aerial Photos in Civil 3D 2014. I get "No Photo" background if I try to zoom in close enough to see.
View 4 Replies View RelatedI am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
I developed problems importing images onto LR - everything was working just fine then.Get a message:"Some operations were not performed.Could not copy a file to requested location"
It itemised every image I am trying to import..I thought I would upgrade to LR 4 and the problem would go away - it didn't!!
Some background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
I'm experiencing a bit of an organization problem with Lightroom 3 which is probably rather easy to fix, but I just can't seen ti figure out how. When I import photos in Lightroom it automatically creates folders (2011-12-14 for example) and I would like to change the location on my computer for these folders, but I can't find where to do it. It now creates these folders in my regular Pictures folder which gets really messy due to this. How can I change this? And how do I relocate all the excisting folders on my laptop, without having to find all the missing photos afterwards.
View 3 Replies View RelatedI have been using the Web Mapping Server for inserting aerial photography for quite some time now. I recently upgraded to Civil 3d 2010, and now when I attempt to insert an aerial photo I get a message box that says "There was a problem adding data to Map." and the image does not show up. When tried on a machine with full administrator privileges it works just fine.
This is a new problem that does not happen in Civil 3d 2009. Here is a link to the WMS site that I have been using, it is through the Land Management Information Center with the State of Minnesota.
[URL].....
I am working on an alignment sheet for a gas line. I am showing an aerial in my main viewport in plan view. I am only showing line work between match lines nothing pass that except the aerial. However I have two more viewports aside from the main one. I have one to each of the sides of the main viewport to show the aerial image only pass the match lines. My viewports are locked all three of them, yet my image on the viewports to each of the sides of the match lines keep acting up and won't show correctly every time I zoom out or in. They'll be a time that they will but if I zoom out or in after that they will move and not match my main viewport were the line work is at. I only copied the main viewport and resized it to fit in the template pass the match lines. Created a reference point to zoom into my aerial after the match line and it all works until I'm ready to plot and zoom out then it messes up.
View 0 Replies View RelatedIn Civil 2013 is there a way to lock where you drag the tool bars? I work on dual screen and drag my properties and layers manager over to the second screen. Randomly they will jump back from the right screen to the left screen on program restart.
Also when I open the grading toolbar and drag it over to the right screen some commands, such as breaking a feature line, will cause it to jump back into the middle of the left screen right then.
Is there anyway to lock the toolbars to where they were dragged last?
I've set the start and end locations to be at the structure inner wall and applied rules but the invert elevation is still as if the pipe ended at the center of the structure. Did I miss something or does this not do what I think it does?
View 1 Replies View RelatedTo Set Geographic Location from a Map, the Autodesk users manual says to "Click Insert tabLocation panelSet LocationFrom Map"
There is no location panel on any insert tab that came with Civil 3D 2014.
What am I missing?
Is there a way to lock the X,Y location of points so that they don't get moved but still be able to change the point style fo the locked points?
View 6 Replies View RelatedI had created a corridor using the attached assembly with conditional cut/fill and SlopeToSurface SA, the cut condition provides a ditch SA at cut only. Then had the Ditch Bottom Profile to follow a ditch profile that I created, and flows toward the increasing chainage. The horizontal offset and elevation of the ditch runs perfectly fine as desired, except between Sta. 0+465 (cut section) and Sta. 0+470 (fill section), where the ditch ties back to the edge of shoulder instead of going toward the outside (as shown in the blue lines).
My question is, do I need to make a transition between the cut and fill sections? If so how much effect and details is needed as I have a few other locations with the same issue.
I have just upgraded from C3D 2011 to C3D 2013. I know it should be simple to copy my custom CUI file from one release to another, but somehow I'm missing it. In 2013, I open Workspace/Customize, then swith to the Transfer tab (right sofar?). In the pull down, I choose Open. Now at this point, I think I should just browse for my 2011 CUI file, but for some reason, I can't find it. If I search my C drive, I still can't find it. With 2011 open, in Workspace, the name of the CUI that I use is "Randy", so I'm assuming the file name to search for would be randy.cui.
View 5 Replies View RelatedI have created a label in Settings>Intersection>Label Styles>Intersection Location Labels. The label will annotate the intersection stations and alignment name - however I haven't been able to configure the northing, easting and point number of the intersection.
View 2 Replies View RelatedHow to set certain Civil 3D data folders to a network location. For example how can I set my default QTO categories, pay item and formula file paths to a network location?
I've figured out how to set Survey Database and Pipe Network Parts Catalog paths. It seems there should be some general configuration settings dialogue for all these paths somewhere. Is there? If not, is there a list of commands for configuring all the path settings?
This is for standalone clients not using Vault.
I can't get the "Properties" dialog box to remain the same location each time I launch Civil 3D 2014. I have "xref" and "toolspace" on another monitor, along with "properties" although each time I launch CIvil the "Properties" dialog box reverts back to the middle of my other monitor...
View 1 Replies View RelatedI need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
View 6 Replies View RelatedI have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
When opening a new drawing in 2013 the UCS icon isn't in the bottom left corner - how to correct ?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have a custom coordinate system defined and would like to send it out to a client, since they're having trouble creating a new coordinate system based on my parameters. Is it possible to sent that as a file so they can copy it to the appropriate folder or is it embedded in a database somewhere?
View 1 Replies View RelatedI have inserted aerial photos into a drawing. When I go to layout view and print preview either to my plotter or my pdf writer I can see the aerial image just fine within the viewport. But once it actually makes a pdf or prints it to the plotter the aerial photos are not there, just the polylines and objects within the drawing.
View 3 Replies View RelatedI am creating a large base map and the county is supplying me with a bunch of jpeg files to use. Each map seems to come with 5 different files..how to put these images in correctly using AutoCAD 2010.
View 5 Replies View RelatedIT moved all of our projects to a new directory and have subsequently broken all the survey events. Is there a way to update survey events so they can find the original file again or does each event need to be redone to fix this?
e.g. I brought in a fbk located at p:/prj/6000 that file is now located in p:/6000.
I have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
Profile View Band Styles, Vertical Geometry and Horizontal Geometry types, include the option to Anchor Labels to True Geometry Locations.
Any image/example showing the difference between the Anchor Label options (Segment in Band and True Geometry Location) in Vertical and Horizontal Profile View Bands.