AutoCAD Civil 3D :: EGL And HGL Jump Error In Autodesk SSA
Aug 29, 2012
I'm new to SSA and have been testing it for the past day. I have read through the user's guide, which states that junction losses are not used in the software. Instead, minor losses are applied as an equivalent friction loss over the length of each pipe. Given this calculation methodology, there should never be any "jumps" in the EGL at standard junctions since no loss is occuring there. Each profile simulation that I run, however, invariably shows jumps in the EGL at various junctions. Some junctions even exhibit an increase in EGL, which makes no logical sense. Also, the HGL is droping at each junction unexpectedly too.I've attached an example where the flow is constant, and all minor losses are 0.
Enter a time code simply by starting to type using the keypad. The period (dot) key should give you 00.
This works if you click on the clip time code, but if I just start to type using the keypad, I get a hash before the frame number instead of a : and on hitting enter nothing happens.
I have daylight_cut at say station 100, then sampled every 20m, however it connect from station 100 all the way to 1000 for example. because there is no such code in between. why can't it create seperate features lines? the thing is sometimes it does it and sometimes it doesn't.
see the redline cutting across the corridor? shouldn't be there.
I am trying to install the student version of autodesk inventor 2011, and I'm using the default installation settings. The installation aborts when installing C++ and this is the message I get in the install log:
2011/1/9:17:36:18 Bobby Porwal NP-CHU === Setup started on NP-CHU by Bobby Porwal === 2011/1/9:17:38:56 Bobby Porwal NP-CHU Install Microsoft Visual C++ 2008 SP1 Redistributable (x86) Failed Installation aborted, Result=1603
Previous day one of the company send drawings in my office which is made on model space and his scale is 1:200 it is reduce scale, but my engineer said to me you have to set this one drawing on paper space and when i shift that one drawing model to paper space it was reduce so that time i thought i have to change the scale so i select enlarge scale on paper space which is 10:1..... so want to ask this
in one of the lighting symbol which is 1200mm in drawing of the full size scale 1:1.
It is about year I use Project Basejump (Bing Map servise) for AutoCAD Map 3D 2013 in my AutoCAD Map 2013 and it works good.
But lately I wanted to test AutoCAD Map 2014 downloading from Autodesk website demo version. I saw that Project Basejump for AutoCAD Map 3D 2013 can not installed to the new - AutoCAD Map 2014 version. I thought that it may be possible copping DLL files from FDO AutoCAD Map 2013 folder to FDO AutoCAD Map 2014 folder and adding commands (or strings) from "provider.xml' of AutoCAD Map 2013 to AutoCAD Map 2014 "provider.xml' file. But it did not worked. Is there any way to use Project Basejump in AutoCAD Map 2014?
the instant it's inserted into a drawing? And why the drawing scale and origin appear to jump around while I'm in block editing mode? AutoCAD recovery could find no errors.
Every since installing 2013 on my iMac system, I get a pop-up window everytime the computer boots up. Here's the message:
Insecure Startup Items folder detected. Items in the Startup Items folder (“/Library/StartupItems/”) have not been started because the folder does not have the proper security settings.
i was working on an animation and that was a great animation I worked on that 2 months and i was working on that and when i wanted to save the scene the monitor gone black and i restart my pc.and when i opened the maya and tried to open the scene it said error reading file.
I'm attempting to get Smoke 2012 SP1 running on Mac OS X 10.7.2. After installation, I cannot get the application to launch -- instead I get a "DlVideo Error: No video list" error and then exit.
Hardware specs are attached, in short 2 x 6 core Mac Pro, 24GB RAM, Quadro FX 4800 and Kona 3G. This is built on a clean install of 10.7.2 using the Apple video driver for the 4800. The display is an Eizo ColorEdge CG303W, attached to the 4800.
I would like to install the 4.1.28 CUDA drivers to enable the Mercury playback engine (as this machine will probably also run Premiere Pro), however I'm trying to keep it as simple as possible until I can get Smoke running.
A Euphonix MC Transport and MC Color will be added to the station, however they are not currently attached.
My workstation name is bc118-s001. I'm using an external license server (macnv3), which is running properly.
Storage is currently set to the local disk, which I know is sub-optimal. Ultimately the storage volume will be a fiber-attached TerraBlock 24D, however I'm upgrading that device from 4.6.4 to 5 before I put the unit into production, and would rather not store any data on it before the upgrade.
I've attached the application and shell logs for your reference. The following lines are only the errors from the app.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_app.log | grep -i error 2074786144 project.C:4713 02/04/12:11:36:35.936 PRJMGT : Load Project, failed to switch to group users 2074786144 video.C:1068 02/04/12:11:36:41.379 VIDEO: non-standard monitor refresh rate (0.000000). Audio/Video playback may not be in sync. 2074786144 EuTop.C:65 02/04/12:11:36:41.467 Control Surfaces : Initialisation failed (error 46) 2074786144 error.C:332 02/04/12:11:36:42.950 ERROR: DlVideo Error: No video list 2074786144 error.C:110 02/04/12:11:36:42.950 DlVideo Error: No video list 2074786144 messageAccumulator.C:268 02/04/12:11:36:42.959 Error: DlVideo Error: No video list (Press ESC)
I notice that the monitor refresh rate is not being detected properly, however the OS seems to detect it properly.
These lines are the errors from the shell.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_shell.log | grep -i error Feb 04 11:36:42 : ERROR: DlVideo Error: No video list Feb 04 11:36:42 : DlVideo Error: No video list
I wanted to connect my Euphonix Color Board to Smoke, but in the beginning I get an error message saying that the EuCon Driver is incompatible.So which version is compatible? I'm running Smoke for Mac 2012 SP1, on Mac OS X 10.6.7
Smoke 2012 SAP2 SP4 and Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts) Mac Pro 4,1 OS X 10.6.7 12 GB RAM NVIDIA Quadro 4000 14 TB RAID (Areca)
After having struggled to get Autodesk 360 working, it is constantly pestering me to say my settings are ready.
I have synced my settings to the Cloud (I like this function) but why are my settings ready to load as presumably syncing to the Cloud duplicates the settings on my machine??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
C3D 2013 managed dot net..I was hoping to find ParcelLoops as a member of Parcel. But its not. used AECC_PARCEL as dxf selection filter then passed to object type; Autodesk.Civil.DatabaseServices.Parcel
I need to access the parcel boundary segments .. have I used the incorrect object?
I have a basic wall sub assembly that I created in SAC.Its looks fine in the SAC but when I import it into Civils it does not work...I have changed the extension from pkt to zip so that I can post it on here
I am trying to open a drawing and it only let me open it read only and no one has it open. I then tried to rename it in window explorer but it gave me a message stating that the drawing is open in Autodesk 360. How do I close the drawing in Autodesk 360?
When I was in Library mode, I would click on Survey View twice and it would give me an option to jump to a certain date I took a picture or jump to pictures taken with a certain camera model. I think I clicked something and now Lightroom doesn't give me that option.
I started using AuoCAD Civil 3D 2013 on my windows 8. It is crashing a few minutes after opened. When I run it in the mode "Civil 3d as Autocad" everything works ok, but I can only visualise and plot the drawing and move the labels.
First, I thought that I had a problem with my PC so I tried googling this issue, updating my version to SP1 but nothing got fixed. Throught my research on the web It seems that mostly of Windows 8 users are facing problems using Autodesk products on their computers especially whem my co-worker was facing such a similar issue on running both of AutoCAD 2012 and Revit 2013 on his windows 8 and I can not describe how much did we got annoyed for such problem and the circumstances for not able to complete our work tasks using Autodesk products.
The point is how Autodesk is going to give a final solution to Windows 8 incomptability issues. Will be there anything further or it is just Windows 8 users are forced to leave their operating system and back for older one without any incomptaibilty issues like Windows 7?
I have a Sony TRV255E camcorder that I have connected to my netbook via USB. When I capture the video and play it back the picture jumps and so does the sound.
I have a problem with mouse move in PS CS4 on Vista Home Premium 64bit. The problem is the following:
I select an area with the crop tool. Then try to drag and move the crop frame a bit, eg. move 10px left. But when I try to drag the frame it immediately jumps some hundred pixel away in random directions.
The problem occures in case of healing brush as well. Sometimes the cursor jumps far away.
I have problem with my mouse, but I didn't recognized any problem with the mouse pointer in any other application. Besides this the above mentioned problem occures on a different machine as well (Also PS CS4 and Vista Home Premium 64bt.)
