It is about year I use Project Basejump (Bing Map servise) for AutoCAD Map 3D 2013 in my AutoCAD Map 2013 and it works good.
But lately I wanted to test AutoCAD Map 2014 downloading from Autodesk website demo version. I saw that Project Basejump for AutoCAD Map 3D 2013 can not installed to the new - AutoCAD Map 2014 version. I thought that it may be possible copping DLL files from FDO AutoCAD Map 2013 folder to FDO AutoCAD Map 2014 folder and adding commands (or strings) from "provider.xml' of AutoCAD Map 2013 to AutoCAD Map 2014 "provider.xml' file. But it did not worked. Is there any way to use Project Basejump in AutoCAD Map 2014?
I don't normally use libraries. I'm just not a big fan of them, so if I'm wrong here about a basic concept it's no surprise. My understanding was that if you add a folder location to a project under the library heading (see image) then everything in it automatically becomes read-only when that project is active.
My intention was to test some of 2014's functionality on products that I have drawn in 2013 without mucking up my other designers who I'm not ready to upgrade, yet. So, I copied some assemblies over to a new folder on my network completely outside of the root folder of the normal working directories. I then assigned that working directory as a library in the new project file I created in 2014 specifically for testing it. I expected this to allow me to open my files without a bunch of unresolved reference problems and not have to worry about accidentally migrating files that I'm not ready to migrate.
So, why did I still manage to migrate a bunch of file that are located in the working directory that's supposed to be write protected?! Now I have actual product files that can't be opened in 2013. Luckily, I can restore these from a back-up, but what did I miss here? Did I not check a certain box somewhere or am I missing the whole concept? I really doubt this critical function of Inventor is somehow bugged in 2014.
Everytime i switch project files for any reason, Inventors response time to anything gets to the point i have to close the program and open it back up. After the program restart I'm able to use it again, but then when I have to change project files it does the same thing again. It's wasting a lot of time for me and I'd rather not format and reinstall everything.
I am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
Previous day one of the company send drawings in my office which is made on model space and his scale is 1:200 it is reduce scale, but my engineer said to me you have to set this one drawing on paper space and when i shift that one drawing model to paper space it was reduce so that time i thought i have to change the scale so i select enlarge scale on paper space which is 10:1..... so want to ask this
in one of the lighting symbol which is 1200mm in drawing of the full size scale 1:1.
I'm new to SSA and have been testing it for the past day. I have read through the user's guide, which states that junction losses are not used in the software. Instead, minor losses are applied as an equivalent friction loss over the length of each pipe. Given this calculation methodology, there should never be any "jumps" in the EGL at standard junctions since no loss is occuring there. Each profile simulation that I run, however, invariably shows jumps in the EGL at various junctions. Some junctions even exhibit an increase in EGL, which makes no logical sense. Also, the HGL is droping at each junction unexpectedly too.I've attached an example where the flow is constant, and all minor losses are 0.
the instant it's inserted into a drawing? And why the drawing scale and origin appear to jump around while I'm in block editing mode? AutoCAD recovery could find no errors.
I have daylight_cut at say station 100, then sampled every 20m, however it connect from station 100 all the way to 1000 for example. because there is no such code in between. why can't it create seperate features lines? the thing is sometimes it does it and sometimes it doesn't.
see the redline cutting across the corridor? shouldn't be there.
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
When I was in Library mode, I would click on Survey View twice and it would give me an option to jump to a certain date I took a picture or jump to pictures taken with a certain camera model. I think I clicked something and now Lightroom doesn't give me that option.
I have a Sony TRV255E camcorder that I have connected to my netbook via USB. When I capture the video and play it back the picture jumps and so does the sound.
I have a problem with mouse move in PS CS4 on Vista Home Premium 64bit. The problem is the following:
I select an area with the crop tool. Then try to drag and move the crop frame a bit, eg. move 10px left. But when I try to drag the frame it immediately jumps some hundred pixel away in random directions.
The problem occures in case of healing brush as well. Sometimes the cursor jumps far away.
I have problem with my mouse, but I didn't recognized any problem with the mouse pointer in any other application. Besides this the above mentioned problem occures on a different machine as well (Also PS CS4 and Vista Home Premium 64bt.)
I used to be able to carry PDN on a Jump drive (flash drive/thumb drive) but once it updated to 3.5.10 when I try to use it away from my own machines, I get an error about C++ not being found. I then get a "Repair" window that comes up but it cannot repair itself.
Is the program no longer able to be portable like it used to be? Or is there something just missing from the machines I have tried to use the portable file on?
I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
PS CS6 .I have two items on a top layer (lets say the left and rights of a pair of earrings), and their accompannying shadows on a layer below. I'd like to be able to highlight both layers, draw a marquee around the right side earring (top layer) and shadow (bottom layer), and CDM+SHIFT+J them each to their own new layers, thus making four layers: left earring, left shadow, right earring, right shadow.This doesn't currently work,?
On a related note, one slow down to doing each layer at a time is that the command: CMD+SHIFT+D, to renew the last selection, only works sporadically for me (sometimes it simply doesn't renew any selection at all). What are the rules for when it should work and when it shouldn't?
How to use Tab key to jump next parameter of Bevel (Poly) caddy and directly type numeric ?
I am use to do this with Tab (or Shift+Tab) and do not use the mouse to click next (or previous) parameter in MAX 2009. But in MAX 2011 & 2012 I can only jump next by Tab (Height to Outline) and can not type the numeric directly !
I have an extensive drawing that covers many art boards. In InDesign I can jump to a page number using a keyboard shortcut. Is there something similar in Illustrator CC where I can navigate backwards and forwards through the art boards and/or jump directly to an artboard by number?
I just installed Lightroom 2.0 and am trying to import RAW files from a jump drive. LR cannot import them, and I get a error message saying the files are damaged or corrupted. I know this is not the case, because my friend was just able to successfully download the same files. Is there something I am doing wrong?
How can I save an image to a jump drive, I have done this many times in the past and now it is not an option. Only the desktop and one other file comes up as an option.
I just installed PS CS6 this evening on my 32-bit Win7 laptop and on my 64-bit Win7 workstation.
Everything went just fine for the installation on both PCs. I always go about setting up my Preferences right away, and I immediately noticed the handy toolbar icon in PS for jumping over to Bridge is gone.
I see that CNTL + ALT + O will do it, but hey! Once in Bridge, the toolbar icon to jump back to PS is still there (the little boomerang icon). Is it really gone, or is there something that I need to change to have it suddenly re-appear?
A friend gave me an SD card of her wedding to tidy up and put onto a DVD. The format is MPG-4. The clips play fine but as soon as I put it all onto onto the time-line I get the odd jump on panning of the camera, which are not there on the clips. I know this can relate to the project settings and I have played around with these, adjusting the bit rate up and down.
I have just put together a 20min video and have several times created an mpeg file on the hard drive as I edit different parts, so that I can see how it comes along on a main TV thats networked to my PC. The footage is from two Panasonic HD cameras and is filmed in AVCHD.
The last two copies I have rendered have 4 scenes with noticeable jumps/stutter. They are all taken from and are part of a clip 146, the music track dosent jump, just certain parts of the scene in the video. This jumping is intermittent in about 30 seconds and the rest of the 20min film is fine. No filters or adjustments have been made to these scenes and they were fine up until yesterday. I tried a second render but its the same.
I would like to know what causes it so I can either avoid this happening again or avoid VS altogether as I have put in a lot of time and work into this 20min video and I don't want to have to do it again, I really want something I can rely on. I have had VS from the very earliest version and I have found that these bugs keep cropping up.
UPDATE:I have done further tests and it is ok if I "Create Video file" Same as Project Settings" BUT if I "Create Video file" DVD Video" it stutters/jumps. I have attached the properties of the scene now.
Most of the footage is Panasonic AVCHD and I use Two Pass Encode. Am I using the correct settings for this type of film. I want to film in the highest quality so that I can copy to blue ray and standard DVD.
My project settings are:
Two Pass Encode PAL (25 fps) MPEG files 24 bits, 720 x 576, 25 fps Upper Field First (DVD-PAL), 16:9 Video data rate: Variable (Max. 8264 kbps) LPCM Audio, 48000 Hz, Stereo
The DVD settings are:
MPEG files 24 bits, 720 x 576, 25 fps Upper Field First (DVD-PAL), 16:9 Video data rate: Variable (Max. 8000 kbps) Audio data rate: 384 kbps Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
Windows 7 64. New Sager, Nvidia 675--up to date everything. Revit 2013 fresh download, very little else on new computer. All drivers and bios up to date.
Samsung monitor, same resolution on both main and secondary monitor.
I've heard of many who have had this issue particularly in the secondary monitor. Not sure what to do.
Essentially, wall jumps 3 to 5 feet when I click on it after it has been drawn. I don't seem to have the same issue if I run revit from the main monitor..
Have the same issue whether i run Revit from the Intel or Nvidia High Performance mode.
Enter a time code simply by starting to type using the keypad. The period (dot) key should give you 00.
This works if you click on the clip time code, but if I just start to type using the keypad, I get a hash before the frame number instead of a : and on hitting enter nothing happens.
