Photoshop :: Crop Frame Jump
Jul 22, 2009
I have a problem with mouse move in PS CS4 on Vista Home Premium 64bit. The problem is the following:
I select an area with the crop tool. Then try to drag and move the crop frame a bit, eg. move 10px left. But when I try to drag the frame it immediately jumps some hundred pixel away in random directions.
The problem occures in case of healing brush as well. Sometimes the cursor jumps far away.
I have problem with my mouse, but I didn't recognized any problem with the mouse pointer in any other application. Besides this the above mentioned problem occures on a different machine as well (Also PS CS4 and Vista Home Premium 64bt.)
View 1 Replies
ADVERTISEMENT
Feb 6, 2011
A friend gave me an SD card of her wedding to tidy up and put onto a DVD. The format is MPG-4. The clips play fine but as soon as I put it all onto onto the time-line I get the odd jump on panning of the camera, which are not there on the clips. I know this can relate to the project settings and I have played around with these, adjusting the bit rate up and down.
View 2 Replies
View Related
May 25, 2008
how to crop an image in CS3 to proportion of a full frame size 35 mm camera?
View 7 Replies
View Related
Sep 16, 2011
I love the GIMP program, even though my attempt at doing my first thing does not seem to be happening.
simply, I have taken a shot of a piece of artwork and I am wanting to crop right at the frame of the artwork. I successfully did the Scissor thing...hovered over the first 'dot' and held down the cntl key...and the marching ants were seen..OK so far.
HOWEVER, (after following a youtube tutorial) when I was at the 'CUT' stage, my crop did not turn white, like in the tutorial--the tutorial was Peyton manning's photo--I think-- so that is the hurdle I have to overcome...All worked well up to that point
--my photo is the first layer, then created another layer, named it, then moved it down one space then deleted one of the layers--I'm doing this from memory now--then did the scissor-thing and then the 'cut' step should have made my artwork all white....but no
View 11 Replies
View Related
Feb 4, 2013
As a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
View 2 Replies
View Related
Aug 16, 2012
PS CS6 .I have two items on a top layer (lets say the left and rights of a pair of earrings), and their accompannying shadows on a layer below. I'd like to be able to highlight both layers, draw a marquee around the right side earring (top layer) and shadow (bottom layer), and CDM+SHIFT+J them each to their own new layers, thus making four layers: left earring, left shadow, right earring, right shadow.This doesn't currently work,?
On a related note, one slow down to doing each layer at a time is that the command: CMD+SHIFT+D, to renew the last selection, only works sporadically for me (sometimes it simply doesn't renew any selection at all). What are the rules for when it should work and when it shouldn't?
View 1 Replies
View Related
May 10, 2012
I just installed PS CS6 this evening on my 32-bit Win7 laptop and on my 64-bit Win7 workstation.
Everything went just fine for the installation on both PCs. I always go about setting up my Preferences right away, and I immediately noticed the handy toolbar icon in PS for jumping over to Bridge is gone.
I see that CNTL + ALT + O will do it, but hey! Once in Bridge, the toolbar icon to jump back to PS is still there (the little boomerang icon). Is it really gone, or is there something that I need to change to have it suddenly re-appear?
View 1 Replies
View Related
Jul 1, 2013
I am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
View 1 Replies
View Related
May 28, 2007
using the crop tool to highlight a picture and crop the sides?
View 1 Replies
View Related
Feb 26, 2008
I have observed an unexpected behavior of mouse wheel zooming in CS3:
using the mouse wheel: when i zoom in (very closely) to some location near the image edges/corners and then zoom out /once/ (i.e. one mouse wheel "click"), the image zooms out and simultaneously the viewed region jumps a little towards the image center. this is kind of annoying since one has to move the image to see the desired location after zooming out a little.
View 5 Replies
View Related
Dec 8, 2004
when using the Save for Web... feature there is a place on the Quality slider where one point makes a disproportionately large jump in file size. It seems to me it is always at 50-51 but I'm not positive of that. Here are some results from a Save for Web...
47 = 226.7K
48 = 230.1K
49 = 236.2K
50 = 239.8K
51 = 298.2
52 = 300.5
etc.
I wonder why that sharp jump exists when files grow fairly proportionately above and below that 'break point." Needless to say I always keep an eye out for that issue when saving for web.
View 6 Replies
View Related
Nov 30, 2012
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
View 3 Replies
View Related
Nov 25, 2012
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies
View Related
Mar 20, 2011
Previous day one of the company send drawings in my office which is made on model space and his scale is 1:200 it is reduce scale, but my engineer said to me you have to set this one drawing on paper space and when i shift that one drawing model to paper space it was reduce so that time i thought i have to change the scale so i select enlarge scale on paper space which is 10:1..... so want to ask this
in one of the lighting symbol which is 1200mm in drawing of the full size scale 1:1.
so i want jump 1:1 scale to 10:1 scale
View 4 Replies
View Related
Oct 30, 2011
When I was in Library mode, I would click on Survey View twice and it would give me an option to jump to a certain date I took a picture or jump to pictures taken with a certain camera model. I think I clicked something and now Lightroom doesn't give me that option.
View 1 Replies
View Related
Nov 17, 2013
Photoshop Crop won't complete when trying to crop an image. This just started a couple of days ago and I can't figure out what's going on with it. This happens in Photoshop CS6 and CC
View 6 Replies
View Related
Nov 15, 2013
How do I creat a frame inside a frame? Elements 4.0
View 2 Replies
View Related
Jan 8, 2011
I have a Sony TRV255E camcorder that I have connected to my netbook via USB. When I capture the video and play it back the picture jumps and so does the sound.
View 2 Replies
View Related
Mar 29, 2012
I used to be able to carry PDN on a Jump drive (flash drive/thumb drive) but once it updated to 3.5.10 when I try to use it away from my own machines, I get an error about C++ not being found. I then get a "Repair" window that comes up but it cannot repair itself.
Is the program no longer able to be portable like it used to be? Or is there something just missing from the machines I have tried to use the portable file on?
View 2 Replies
View Related
Jul 1, 2013
It is about year I use Project Basejump (Bing Map servise) for AutoCAD Map 3D 2013 in my AutoCAD Map 2013 and it works good.
But lately I wanted to test AutoCAD Map 2014 downloading from Autodesk website demo version. I saw that Project Basejump for AutoCAD Map 3D 2013 can not installed to the new - AutoCAD Map 2014 version. I thought that it may be possible copping DLL files from FDO AutoCAD Map 2013 folder to FDO AutoCAD Map 2014 folder and adding commands (or strings) from "provider.xml' of AutoCAD Map 2013 to AutoCAD Map 2014 "provider.xml' file. But it did not worked. Is there any way to use Project Basejump in AutoCAD Map 2014?
View 9 Replies
View Related
Aug 29, 2012
I'm new to SSA and have been testing it for the past day. I have read through the user's guide, which states that junction losses are not used in the software. Instead, minor losses are applied as an equivalent friction loss over the length of each pipe. Given this calculation methodology, there should never be any "jumps" in the EGL at standard junctions since no loss is occuring there. Each profile simulation that I run, however, invariably shows jumps in the EGL at various junctions. Some junctions even exhibit an increase in EGL, which makes no logical sense. Also, the HGL is droping at each junction unexpectedly too.I've attached an example where the flow is constant, and all minor losses are 0.
View 1 Replies
View Related
Jul 20, 2011
How to use Tab key to jump next parameter of Bevel (Poly) caddy and directly type numeric ?
I am use to do this with Tab (or Shift+Tab) and do not use the mouse to click next (or previous) parameter in MAX 2009. But in MAX 2011 & 2012 I can only jump next by Tab (Height to Outline) and can not type the numeric directly !
View 9 Replies
View Related
Jul 17, 2013
I have an extensive drawing that covers many art boards. In InDesign I can jump to a page number using a keyboard shortcut. Is there something similar in Illustrator CC where I can navigate backwards and forwards through the art boards and/or jump directly to an artboard by number?
View 6 Replies
View Related
Jun 25, 2012
I just installed Lightroom 2.0 and am trying to import RAW files from a jump drive. LR cannot import them, and I get a error message saying the files are damaged or corrupted. I know this is not the case, because my friend was just able to successfully download the same files. Is there something I am doing wrong?
View 4 Replies
View Related
Sep 28, 2013
How can I save an image to a jump drive, I have done this many times in the past and now it is not an option. Only the desktop and one other file comes up as an option.
View 8 Replies
View Related
Jan 27, 2013
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
View 4 Replies
View Related
Nov 19, 2013
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
View 9 Replies
View Related
Jun 2, 2008
when I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies
View Related
Aug 15, 2012
I have just put together a 20min video and have several times created an mpeg file on the hard drive as I edit different parts, so that I can see how it comes along on a main TV thats networked to my PC. The footage is from two Panasonic HD cameras and is filmed in AVCHD.
The last two copies I have rendered have 4 scenes with noticeable jumps/stutter. They are all taken from and are part of a clip 146, the music track dosent jump, just certain parts of the scene in the video. This jumping is intermittent in about 30 seconds and the rest of the 20min film is fine. No filters or adjustments have been made to these scenes and they were fine up until yesterday. I tried a second render but its the same.
I would like to know what causes it so I can either avoid this happening again or avoid VS altogether as I have put in a lot of time and work into this 20min video and I don't want to have to do it again, I really want something I can rely on. I have had VS from the very earliest version and I have found that these bugs keep cropping up.
UPDATE:I have done further tests and it is ok if I "Create Video file" Same as Project Settings" BUT if I "Create Video file" DVD Video" it stutters/jumps. I have attached the properties of the scene now.
Most of the footage is Panasonic AVCHD and I use Two Pass Encode. Am I using the correct settings for this type of film. I want to film in the highest quality so that I can copy to blue ray and standard DVD.
My project settings are:
Two Pass Encode
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8264 kbps)
LPCM Audio, 48000 Hz, Stereo
The DVD settings are:
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
View 1 Replies
View Related
Oct 15, 2013
Why do they do this? I am trying to quick elevation edit a featureline but my edit glyph jumps to a completly different featureline that is near.
View 3 Replies
View Related
Sep 12, 2012
Windows 7 64. New Sager, Nvidia 675--up to date everything. Revit 2013 fresh download, very little else on new computer. All drivers and bios up to date.
Samsung monitor, same resolution on both main and secondary monitor.
I've heard of many who have had this issue particularly in the secondary monitor. Not sure what to do.
Essentially, wall jumps 3 to 5 feet when I click on it after it has been drawn. I don't seem to have the same issue if I run revit from the main monitor..
Have the same issue whether i run Revit from the Intel or Nvidia High Performance mode.
View 3 Replies
View Related
