AutoCad :: How To Jump 1:1 To 10:1 Scale
Mar 20, 2011
Previous day one of the company send drawings in my office which is made on model space and his scale is 1:200 it is reduce scale, but my engineer said to me you have to set this one drawing on paper space and when i shift that one drawing model to paper space it was reduce so that time i thought i have to change the scale so i select enlarge scale on paper space which is 10:1..... so want to ask this
in one of the lighting symbol which is 1200mm in drawing of the full size scale 1:1.
so i want jump 1:1 scale to 10:1 scale
View 4 Replies
ADVERTISEMENT
Nov 4, 2013
the instant it's inserted into a drawing? And why the drawing scale and origin appear to jump around while I'm in block editing mode? AutoCAD recovery could find no errors.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jul 1, 2013
It is about year I use Project Basejump (Bing Map servise) for AutoCAD Map 3D 2013 in my AutoCAD Map 2013 and it works good.
But lately I wanted to test AutoCAD Map 2014 downloading from Autodesk website demo version. I saw that Project Basejump for AutoCAD Map 3D 2013 can not installed to the new - AutoCAD Map 2014 version. I thought that it may be possible copping DLL files from FDO AutoCAD Map 2013 folder to FDO AutoCAD Map 2014 folder and adding commands (or strings) from "provider.xml' of AutoCAD Map 2013 to AutoCAD Map 2014 "provider.xml' file. But it did not worked. Is there any way to use Project Basejump in AutoCAD Map 2014?
View 9 Replies
View Related
Aug 29, 2012
I'm new to SSA and have been testing it for the past day. I have read through the user's guide, which states that junction losses are not used in the software. Instead, minor losses are applied as an equivalent friction loss over the length of each pipe. Given this calculation methodology, there should never be any "jumps" in the EGL at standard junctions since no loss is occuring there. Each profile simulation that I run, however, invariably shows jumps in the EGL at various junctions. Some junctions even exhibit an increase in EGL, which makes no logical sense. Also, the HGL is droping at each junction unexpectedly too.I've attached an example where the flow is constant, and all minor losses are 0.
View 1 Replies
View Related
Oct 15, 2013
Why do they do this? I am trying to quick elevation edit a featureline but my edit glyph jumps to a completly different featureline that is near.
View 3 Replies
View Related
Oct 1, 2012
I have daylight_cut at say station 100, then sampled every 20m, however it connect from station 100 all the way to 1000 for example. because there is no such code in between. why can't it create seperate features lines? the thing is sometimes it does it and sometimes it doesn't.
see the redline cutting across the corridor? shouldn't be there.
View 5 Replies
View Related
Sep 20, 2013
My corridor Feature Lines for Daylight Jump across in different areas (see attached PDF)
when I look at it in 3d it looks ok but the plan view the jumped lines show up.
View 4 Replies
View Related
Oct 30, 2011
When I was in Library mode, I would click on Survey View twice and it would give me an option to jump to a certain date I took a picture or jump to pictures taken with a certain camera model. I think I clicked something and now Lightroom doesn't give me that option.
View 1 Replies
View Related
Jan 8, 2011
I have a Sony TRV255E camcorder that I have connected to my netbook via USB. When I capture the video and play it back the picture jumps and so does the sound.
View 2 Replies
View Related
Jul 22, 2009
I have a problem with mouse move in PS CS4 on Vista Home Premium 64bit. The problem is the following:
I select an area with the crop tool. Then try to drag and move the crop frame a bit, eg. move 10px left. But when I try to drag the frame it immediately jumps some hundred pixel away in random directions.
The problem occures in case of healing brush as well. Sometimes the cursor jumps far away.
I have problem with my mouse, but I didn't recognized any problem with the mouse pointer in any other application. Besides this the above mentioned problem occures on a different machine as well (Also PS CS4 and Vista Home Premium 64bt.)
View 1 Replies
View Related
Mar 29, 2012
I used to be able to carry PDN on a Jump drive (flash drive/thumb drive) but once it updated to 3.5.10 when I try to use it away from my own machines, I get an error about C++ not being found. I then get a "Repair" window that comes up but it cannot repair itself.
Is the program no longer able to be portable like it used to be? Or is there something just missing from the machines I have tried to use the portable file on?
View 2 Replies
View Related
Aug 16, 2012
PS CS6 .I have two items on a top layer (lets say the left and rights of a pair of earrings), and their accompannying shadows on a layer below. I'd like to be able to highlight both layers, draw a marquee around the right side earring (top layer) and shadow (bottom layer), and CDM+SHIFT+J them each to their own new layers, thus making four layers: left earring, left shadow, right earring, right shadow.This doesn't currently work,?
On a related note, one slow down to doing each layer at a time is that the command: CMD+SHIFT+D, to renew the last selection, only works sporadically for me (sometimes it simply doesn't renew any selection at all). What are the rules for when it should work and when it shouldn't?
View 1 Replies
View Related
Jul 20, 2011
How to use Tab key to jump next parameter of Bevel (Poly) caddy and directly type numeric ?
I am use to do this with Tab (or Shift+Tab) and do not use the mouse to click next (or previous) parameter in MAX 2009. But in MAX 2011 & 2012 I can only jump next by Tab (Height to Outline) and can not type the numeric directly !
View 9 Replies
View Related
Jul 17, 2013
I have an extensive drawing that covers many art boards. In InDesign I can jump to a page number using a keyboard shortcut. Is there something similar in Illustrator CC where I can navigate backwards and forwards through the art boards and/or jump directly to an artboard by number?
View 6 Replies
View Related
Jun 25, 2012
I just installed Lightroom 2.0 and am trying to import RAW files from a jump drive. LR cannot import them, and I get a error message saying the files are damaged or corrupted. I know this is not the case, because my friend was just able to successfully download the same files. Is there something I am doing wrong?
View 4 Replies
View Related
Sep 28, 2013
How can I save an image to a jump drive, I have done this many times in the past and now it is not an option. Only the desktop and one other file comes up as an option.
View 8 Replies
View Related
May 10, 2012
I just installed PS CS6 this evening on my 32-bit Win7 laptop and on my 64-bit Win7 workstation.
Everything went just fine for the installation on both PCs. I always go about setting up my Preferences right away, and I immediately noticed the handy toolbar icon in PS for jumping over to Bridge is gone.
I see that CNTL + ALT + O will do it, but hey! Once in Bridge, the toolbar icon to jump back to PS is still there (the little boomerang icon). Is it really gone, or is there something that I need to change to have it suddenly re-appear?
View 1 Replies
View Related
Feb 6, 2011
A friend gave me an SD card of her wedding to tidy up and put onto a DVD. The format is MPG-4. The clips play fine but as soon as I put it all onto onto the time-line I get the odd jump on panning of the camera, which are not there on the clips. I know this can relate to the project settings and I have played around with these, adjusting the bit rate up and down.
View 2 Replies
View Related
Aug 15, 2012
I have just put together a 20min video and have several times created an mpeg file on the hard drive as I edit different parts, so that I can see how it comes along on a main TV thats networked to my PC. The footage is from two Panasonic HD cameras and is filmed in AVCHD.
The last two copies I have rendered have 4 scenes with noticeable jumps/stutter. They are all taken from and are part of a clip 146, the music track dosent jump, just certain parts of the scene in the video. This jumping is intermittent in about 30 seconds and the rest of the 20min film is fine. No filters or adjustments have been made to these scenes and they were fine up until yesterday. I tried a second render but its the same.
I would like to know what causes it so I can either avoid this happening again or avoid VS altogether as I have put in a lot of time and work into this 20min video and I don't want to have to do it again, I really want something I can rely on. I have had VS from the very earliest version and I have found that these bugs keep cropping up.
UPDATE:I have done further tests and it is ok if I "Create Video file" Same as Project Settings" BUT if I "Create Video file" DVD Video" it stutters/jumps. I have attached the properties of the scene now.
Most of the footage is Panasonic AVCHD and I use Two Pass Encode. Am I using the correct settings for this type of film. I want to film in the highest quality so that I can copy to blue ray and standard DVD.
My project settings are:
Two Pass Encode
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8264 kbps)
LPCM Audio, 48000 Hz, Stereo
The DVD settings are:
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
View 1 Replies
View Related
Sep 12, 2012
Windows 7 64. New Sager, Nvidia 675--up to date everything. Revit 2013 fresh download, very little else on new computer. All drivers and bios up to date.
Samsung monitor, same resolution on both main and secondary monitor.
I've heard of many who have had this issue particularly in the secondary monitor. Not sure what to do.
Essentially, wall jumps 3 to 5 feet when I click on it after it has been drawn. I don't seem to have the same issue if I run revit from the main monitor..
Have the same issue whether i run Revit from the Intel or Nvidia High Performance mode.
View 3 Replies
View Related
Oct 15, 2012
Is it my imagination or did smoke use to do this:
Enter a time code simply by starting to type using the keypad. The period (dot) key should give you 00.
This works if you click on the clip time code, but if I just start to type using the keypad, I get a hash before the frame number instead of a : and on hitting enter nothing happens.
MacBook Pro Retina
2.7GHz Intel Core i7
16GB RAM
View 9 Replies
View Related
Oct 27, 2011
I have a biped that I created to rig a horse. It was originally created in 3da Max 9. The problem is that through the years and different max versions it has worked fine for the most part. But sometimes when I take it out of figure mode the clavicles want to go back to the original rotation. See the attached images.
I have used the rig in 3ds max 9 3ds Max 2010 and now in 3ds Max2011.
This problem occured mainly in Max 9 and now in Max 2011. I have had it happen on other bipeds used in normal upright biped mode.
It has a run cycle animated on it and the biped behaved the whole time it was being animated.
I recently put it in figure mode to model a saddle on the horse and now it jumps when I take it out of biped. I just reinstalled Win7 and completed all wundows updates and loaded Max 2011 and put sp1, sp2 on. A week ago I was working with it with no problems. Since rebuilding the system I have this problem.
View 4 Replies
View Related
Apr 13, 2012
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
View 9 Replies
View Related
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Jun 27, 2012
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
View 3 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
Aug 9, 2012
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
View 2 Replies
View Related
Nov 22, 2013
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
View 3 Replies
View Related
Feb 26, 2008
I have observed an unexpected behavior of mouse wheel zooming in CS3:
using the mouse wheel: when i zoom in (very closely) to some location near the image edges/corners and then zoom out /once/ (i.e. one mouse wheel "click"), the image zooms out and simultaneously the viewed region jumps a little towards the image center. this is kind of annoying since one has to move the image to see the desired location after zooming out a little.
View 5 Replies
View Related
Dec 8, 2004
when using the Save for Web... feature there is a place on the Quality slider where one point makes a disproportionately large jump in file size. It seems to me it is always at 50-51 but I'm not positive of that. Here are some results from a Save for Web...
47 = 226.7K
48 = 230.1K
49 = 236.2K
50 = 239.8K
51 = 298.2
52 = 300.5
etc.
I wonder why that sharp jump exists when files grow fairly proportionately above and below that 'break point." Needless to say I always keep an eye out for that issue when saving for web.
View 6 Replies
View Related
Jul 19, 2012
With previous versions of Lightroom (pre v4.x), when I would plug in a memory card with photos LR would automatically switch to the import screen. This seemed to stop at v4. I can't seem to find a way to make that happen automatically under v4. how to make LR automatically switch to the import screen when a memory card is connected?
View 10 Replies
View Related
