Photoshop :: CS6 / Jump Multiple Layers To New Layer?
Aug 16, 2012
PS CS6 .I have two items on a top layer (lets say the left and rights of a pair of earrings), and their accompannying shadows on a layer below. I'd like to be able to highlight both layers, draw a marquee around the right side earring (top layer) and shadow (bottom layer), and CDM+SHIFT+J them each to their own new layers, thus making four layers: left earring, left shadow, right earring, right shadow.This doesn't currently work,?
On a related note, one slow down to doing each layer at a time is that the command: CMD+SHIFT+D, to renew the last selection, only works sporadically for me (sometimes it simply doesn't renew any selection at all). What are the rules for when it should work and when it shouldn't?
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
working on Layers and Layer Mask to obtain see through multiple Layers effect.Below is the description of my problem that I am looking forward towards resolution in this forum. I will be glad if some expert can guide me on this.
I have three layers of different colors as below.
Layer 1topmost layer) with Red color filled rectangle.Layer 2(below Layer 1) with Green color filled rectangle.Layer 3(bottom most layer, below Layer 2) with Blue color filled rectangle.When I erase something with brush on Layer 1 using masking Layer 1, it hollows the erased part and start showing the Green color of Layer 2 in hollow section of Layer 1.
What I want to achieve is that, when I erase Layer 1 using layer mask, then it should hollow Layer 1 as well as Layer 2 and should show Blue color in the hollow section of Layer 1.i.e: Hollow section made on Layer 1(using Layer Mask on Layer 1) should also be applied on Layer 2 so that Layer 1 and Layer 2 becomes hollow using eraser and I should see through Layer 1 and Layer 2 and Blue color of Layer 3 should be visible from the hollow section.
Though I can do this by Flattening Layer 1 and Layer 2 together so that it forms one single Image, and then when I hollow this Flattened image using Layer Mask, then it will show me Blue color. But I do not want to do this, as I would lose the flexibility to unhollow/recover the hollow region on both Layer 1 and Layer 2 independently in the future.
What I mean is that say you have layers I and I that are positioned next to each other so they look like "II". You want to center them in relation to some selected space so that they still look like "II" and not "I".
Do you see what I'm saying?
Is there a way to center them so that they're still in the same configuration relative to each other instead of centering them so that they both get layered on top of each other in the centering? Maybe by linking them or some other way?
I'm making an animated GIF, and what I want to do is overlay each layer of the animation with a layer of text. I know the hard and long way by creating a copy of the text layer and merging it with each and every layer of the animation, but is any faster way of doing this?
I have this issue where I have to merge lots of layers in order to finish the job. Thing is that two of them have layer styles added to them. Each one has two different layers styles added to it. If I try to merge the layers, the effect won't stay the same and only one layer style will apply (and not even this one works correctly).
is it possible to select multiple layers (with layer mask) and merge them?
tell application "Adobe Photoshop CS6" tell current document set current layer to every layer of layer set "bloem 1-9" of layer set "Bloem" tell current layer merge end tell end tell end tell
I am using Adobe Photoshop CS6, latest version as of 05/25/12.I have 19 layers, each has a 1200x1200px texture. These are of course overlapped, so setting them all to visible will only show the top layer.
All layers are rasterized, and contain 1200x1200px:
1) I select all 19 layers using shift+click, all are highlighted (in the layer pane).
2) I select a region using the selection tool, in this case a rectangular region that is 172px high and 35px wide.
3) I right click the selection, and then select: layer via copy. (Note, Layer via cut is disabled for some reason)
4) *problem* It creates 19 new layers with the full image from the selected layers and not the selection which is what I wanted to place in the new layers.
5) *problem* when I right click the selection and select "Free Transform", the transform box surrounds the entire canvas and not the selection.
6) *problem* when I skew, it skews the entire image and not just the selection.
7) *problem* Previously, I have been able to select a layer from the layer pane, go to image menu, select adjustments, brightness/contrast, and adjust the brightness/contrast for just that layer. Now it wont let me.
8) *related problem* If I have 3 layers (background, 1, and 2) on a 1200x1200 canvas, with the image in layer 1 being 150px, and the image in layer 2 being 150x, each rasterized, and then stack the images on 1 and 2 over eachother, then select both layers, then select a region inside the stacked images, then select free transform, the free transform selection embodies all pixels inside the canvas (not the entire canvas this time) and performs the transform on these pixels and not the original selection.
If I do it making all the layers visible as well as selected, it behaves the same.What appears to be happening is Photoshop is ignoring the selection and for some reason is using a pixel region (or if pixels cover the entire canvas, the whole image) when performing actions intended for the selection.
What's strange is when I made these textures, I started out with 19 150x150 pictures, I set the canvas size to 1200x1200, selected all the layers in the layer pane, selected the 150x150 image in the middle, and was able to move all 19 textures to the top right corner, able to switch to transform on all 19 pictures, able to rotate 180 degrees all 19 pictures, was able to flip horizontal all 19 pictures, then able to copy all 19 pictures to new layers, move the 19 pictures all at the same time to the right 150 pixels, rinse and repeat, to eventually come out with 19 1200x1200 textures tiled from the 150px pictures. In other words, I did exactly what I am attempting to do with the 1200x1200 pictures with the 150x150 pixtures and it worked like a champ.
The end goal of course is to take a selection of all 19 of the 1200x1200 pictures, transform, then skew that image to make a collage of images applied to an added background. Performing this on all 19 textures and getting the same exact skew, etc would take days considering I need to do about 15 of different portions of the tile.
I'm working on a drawing and I need to take multiple layers that I have drawn (which make up one unit) and basically merge them together so that I can replicate and move them about and place them where they need to go in the larger unit that they live in.
I tried playing with grouping in the Layers Manager, but that doesn't seem to be doing anything for me. Not sure if I'm just doing something wrong, or if there is another way to go about this.
I'm attaching my CAD drawing so you can see what I'm up to. In this drawing, there are basically two groups of layers. Those that make up the Control Tower itself, and another group for what's called a Tajimi Rack. I need to have all the layers for the Tajimi Rack made as one so that I can move that object around without having to move the layers one at a time. (There is a lot more that needs to drawn into the Tajimi Rack, but once I know how to merge them all together, I'll be in a good position to carry forward.)
I also need to know how to then take that new Tajimi Rack layer and duplicate it (I'm looking to place about a dozen of the Tajimi Racks in the control tower.
FWIW, I'm a self taught CADer. By that I mean I have to use CAD in my job but it's always done in a 2D setting where I'm simply looking through roofs with other drawings laid under for rigging purposes. This drawing things in 3D concept is something I'm just making up as I go along. 5PTS Control Tower.dwg
I need to quickly obtain a count of all entities on a layer, or preferably multiple layers. In this instance all the entities will be hatches so that should make it a bit easier.
I'm aware I can use quickselect but if there was a routine that would select all hatch entities on screen (multiple layers) and provide a count per layer that would be much quicker.
I am trying to turn every layer in my .ai file to a raster image without flattening to one layer.
-The big issue I am dealing with is the agency that just built a paralax site for us refuses to export to PSD. I have tried every possible way to do this but keep getting the file is to big message. To add to it they had it all on 1 layer. I was able to release to sequence, but now am trying to see if rasterizing the objects will work.
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered.(maybe in cs6? we are still using cs5)For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
I am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
I have a problem with mouse move in PS CS4 on Vista Home Premium 64bit. The problem is the following:
I select an area with the crop tool. Then try to drag and move the crop frame a bit, eg. move 10px left. But when I try to drag the frame it immediately jumps some hundred pixel away in random directions.
The problem occures in case of healing brush as well. Sometimes the cursor jumps far away.
I have problem with my mouse, but I didn't recognized any problem with the mouse pointer in any other application. Besides this the above mentioned problem occures on a different machine as well (Also PS CS4 and Vista Home Premium 64bt.)
I want to drag multiple adjustment layers, typically four with default masks but no masking has been applied, from one document to another. I have read several articles about this, but no method works reliably for me. I running CS6.
I am creating a wood grain texture that has a diffuse and bump layer. I want to paste both layers "into" a selected area of a UV map. Can this be done with both layers at the same time using "paste into"? I have tried using groups and also tried linking with "paste into" with no luck. Once pasted I also want to be able to manipulate both layers at the same time. I have searched all over and haven't found an answer. I am using CS4.
I was wondering if it is possible to edit the threshold on multiple layers at the same time instead of editing one layer at a time. I am currently working on an animation which i import from imageready, and would like to apply the threshold effect. Is there a trick to make this possible?
All of a sudden, I cant use the CTRL+CLICK to select Multiple Layers. When I do, I get this little box at the point of the cursor and ""Load Selection" pops up in the History.
In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?
